smart things Button User manual

Welcome to your
Button
Setup
1.
2. Use the SmartThings mobile app to
select the “Add device” card and
then select the “Remote/Button”
category.
Make sure the Button is within
15 feet (4.5 meters) of your
SmartThings Hub or SmartThings
Wifi(or compatible device with
SmartThings Hub functionality)
during setup.
3. Remove the tab on the Button
marked “Remove When Connecting”
and follow the on screen instructions
in the SmartThings app to complete
setup.

Connect button
TroubleshootingPlacement
The Button can control any connected
devices at a touch of a Button.
Simply place the Button on the table,
desk, or any magnetic mating surface.
The Button can also monitor
temperature.
1.
2.
Hold the “Connect” button with a
paperclip or similar tool for 5
seconds, and release it when the
LED starts blinking red.
Use the SmartThings mobile app to
select “Add device” card and then
follow the on-screen instructions to
complete setup.
If you’re still having trouble connecting
the Button, please visit
Support.SmartThings.com for assistance.
Back Front
LED Light