Smarter FridgeCam User manual

FridgeCamTM
Guide
Get the app at smarter.am/app or search
‘Smarter 3.0’ on the app store. Available on
iOS and Android.
Follow the in-app instructions to set up
your FridgeCam.
For support, go to
www.smarter.am/troubleshooting
To charge, remove the camera from
the fridge and connect to power
with the USB cable provided.
During charging, the green LED will
remain lit. Ensure you fully charge
the FridgeCam before rst use with a
wall adapter plug.
Charging
When the battery is fully charged,
the green LED will turn o.
After charging, place back in the
fridge in the same mount position,
close the door and tap the“reset
after charging” button in the app
settings.
Ready to use
All Rights Reserved. Smarter Applications Ltd 2017. Due to continuous product improvement,
illustrations and instructions are subject to change.

If the product is not set up or
looking for WiFi credentials,
you may see the amber light.
It is normal to see during rst
installation and also when the
camera is initialising for a brief
moment.
Searching for WiFi
The red light indicates that the
FridgeCam is attempting to
re-connect to your WiFi router,
if this light is on continuously,
try moving the router closer to
the fridge and ensure your wi
details are correct.
WiFi not congured
After a successful set up to
your router and internet, the
FridgeCam will light green
indicating a connection.
Connected to WiFi Mounting the FridgeCam correctly is key to getting an optimal
view of your fridge.
Follow the in-app guide and video tutorials before tting your
FridgeCam or go to www.smarter.am/support to nd out more.
Fitting your FridgeCam
When the FridgeCam is in use in your fridge, some of
these lights may appear each time you open and close
your fridge door whilst its connecting, this is normal.
If you do not see new pictures of your fridge on your
app, please check the connection light status using this
guide to ensure it has an internet connection.

Quick setup
guide.

Before setting up, charge
the FridgeCam for up to 6
hours using the USB cable
provided in the box using
a standard smartphone
USB wall outlet power
adapter rated 5V 2A.
1. Charge your
FridgeCam
Follow
the steps.
For support, email us at
[e-mail] or give
us a call. Lines are open
Monday to Friday 10am-
7pm GMT
EU Support line
0800 802 1237
US support line
[phone]
In the box
FridgeCam
Universal mount
Charging cable
Spare mounting tape
Surface cleaning wipe
Reset pin

Search‘Smarter 3.0’on
your app store to
download the correct
Smarter app or visit our
website.
www.smarter.am/android
www.smarter.am/ios
2. Download
the app
Before mounting your
FridgeCam into your
fridge, follow the in-app
steps to connect it to your
wi router and tutorials
to mount the camera in
its optimal position.
3. Follow the
in-app steps

Having issues setting up or wish to return your product?
Please give us a call or contact us online before taking this
product back to the store.
www.smarter.am/support

IMPORTANT PRODUCT + SAFETY INSTRUCTIONS
IMPORTANT MODE D’EMPLOI DU PRODUIT + LES INSTRUCTIONS
RELATIVES A LA SÉCURITÉ
MODEL SFC01

WARNING
Important Product and Safety Instructions
For more detailed information about camera features and settings, download the user
manual for the product online at smarter.am/help.
• Always ensure that when the camera is in use or in the Fridge, that the housing is fully
closed and all seals including the Micro USB cover is closed and sealed.
Observe proper precautions when handling batteries. Batteries may leak or explode if
improperly handled.
Observe the following precautions to avoid a camera explosion or re:
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave,
incinerate or paint the camera.
• Do not insert foreign objects into any opening on the camera, such as the USB port.
• Do not use the camera if it has been damaged—for example, if cracked, punctured
or harmed by water. Disassembling or puncturing the battery (whether integrated or
removable) can cause an explosion or re.
• Do not dry the camera or battery with an external heat source such as a microwave
oven or hair dryer.
• Do not directly pour water on the product or submerge in water.
• Store the camera out of reach of children and infants.
• Do not use organic solvents such as alcohol, benzine, or thinners to clean the product.
WARNING: Do not place naked ame sources, such as lighted candles, on or near the
product.
When charging the camera, do not handle the plug or charger with wet hands. Failure to
observe this precaution could result in electric shock.
Using a wall charger other than a Smarter Wall Charger can damage the camera battery and

could result in re or leakage. Only use chargers marked: Output 5V 2A. If you do not know
the voltage and current of your charger, use the included USB cable to charge the camera
from your computer.
CAUTION: When using the product near another device, read that device’s user guide for
any safety instructions. To limit potential interference with other digital transceivers. Power
your camera owhenever it is forbidden to use it or when it may cause interference. Do not
block any ventilation holes on the camera as the heat generated may hurt you and damage
the apparatus.
NOTICES: Avoid exposing your camera or battery to very cold or very hot temperatures.
Low or high temperature conditions may temporarily shorten the battery life or cause the
camera to temporarily stop working properly. Avoid dramatic changes in temperature or
humidity when using the camera or remote control, as condensation may form on or within
the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
8. Protect the power cord from being walked on or pinched particularly at plugs, conveni-
ence receptacles, and the point where they exit from the apparatus during charge.
9. Only use attachments/accessories and mounts specied by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualied services personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, or the apparatus does not operate
normally or has been dropped.

Battery Warnings
WARNING: The battery pack shall not be exposed to excessive heat such as sunshine, re or
the like.
• Do not remove the battery from its housing or dismantle the housing.
• Do not dismantle, open or shred battery pack or cells.
• Do not replace the battery.
• Only use the supplied and pre-tted battery in the camera.
• Do not expose batteries or a battery pack to heat or re. Avoid storage in
direct sunlight.
• Do not short-circuit the battery. Do not store batteries in a box or drawer where they
may short-circuit each other or be short-circuited by other metal objects.
• Do not subject batteries or the camera to mechanical shock.
• In the event of a battery leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the aected area with copious amounts
of water and seek medical advice.
• Do not use any charger other than that specically provided for use with
the equipment.
• Do not use any battery pack or cell which is not designed for use with the product.
• Do not mix cells of dierent manufacture, capacity, size or type within a device.
• Keep batteries out of the reach of children.
• Seek medical advice immediately if a battery has been swallowed.
• Keep batteries clean and dry.
• Batteries need to be charged before use. Always use the correct charger and refer to
the manufacturer’s instructions or equipment manual for proper charging instructions.
• Do not leave a battery on prolonged charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the batter-
ies several times to obtain maximum performance.
• Batteries give their best performance when they are operated at normal room temperature
68°F (20°C) ± 9°F (5°C).
• Use the battery only in the application for which it was intended.

• The battery provided with your system is not user serviceable. Contact Customer Service for
all battery related issues.
• Do not store your battery with metal objects, such as coins, keys or necklaces. If the
battery terminals come in contact with metal objects, this may cause a re.
• Keep the battery dry. The camera protects the battery from water or moisture damage. Do
not get the battery wet. Failure to observe this precaution could result in re or electric
shock. Damage to the battery caused by contact with liquid is not covered under
the warranty.
• If the housing is damaged or cracked, please discontinue use of the product.
This symbol means that according to local laws and regulations your
product should be disposed of separately from household waste.
When this product reaches its end of life, take it to a collection point des-
ignated by local authorities. Some collection points accept products for
free. The separate collection and recycling of your product at the time of
disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment.
Hereby, Smarter Applications Ltd declares that the radio equipment type Smarter Fridge-
Cam is in compliance with Directive 2014/53/EU.
The full text of the latest declaration of conformity is available at the following internet
address: smarter.am/help.
FCC ID: 2AKC5-SFC01

IC Regulations: This device complies with Industry Canada license-exempt RSS standards. Op-
eration is subject to the following two conditions: (1) This device may not cause interference
and; (2) This device must accept any interference– including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
The Country Code Selection feature is disabled for products marketed in the US/Canada.
For product available in the USA/Canada markets, only channel 1~11 can be operated. Selec-
tion of other channels is not possible.
SMARTER APPLICATIONS LTD.
LIMITED WARRANTY AND DISCLAIMERS
Smarter Applications Ltd warrants that, the enclosed Product will be free from defects in ma-
terial and workman- ship, and agrees that it will, at its sole discretion, either repair or replace
any defective Product subject to the following terms and conditions:
1. This limited warranty extends only to you, the customer, as the end-user of the Product.
You may have addition- al rights under applicable law. This limited warranty does not aect
such rights.
2. The warranty period is 24 (twenty four) months from the date on which you purchased
the Product. You must notify the retailer, of any defects as soon as possible after you have
become aware of them.
3. The product is packaged and returned in a safe condition, in the original packaging and
complete (where appropriate). You may be required to pay the cost of returning any defective
Product to Smarter, or the retailer from whom you purchased the Product. However, Smarter
will pay th e cost of delivering any repaired or replaced Product back to you.
4. To claim under this warranty, you are required to keep your original proof of purchase, such
as the receipt. You will need it to prove the date of purchase in respect of any warranty claims.
5. This limited warranty shall not apply in respect of the following:
i) Any deterioration due to normal wear and tear and all other externally exposed parts that
IC Regulations: This device complies with Industry Canada license-exempt RSS standards.
Operation is subject to the following two conditions: (1) This device may not cause
interference and; (2) This device must accept any interference - including interference that
may cause undesired operation of the device.
Caution: To maintain the compliance with the Industry Canada’s RF exposure guideline, place
the base unit at least 20 cm from nearby persons.
This Class B digital apparatus complies with Canadian ICES-003. The Country Code Selection
feature is disabled for products marketed in the US/Canada. For product available in the
USA/Canada markets, only channel 1~11 can be operated. Selection of other channels is not
possible.

are scratched or damaged due to normal customer use.
ii) If you make further use of such goods after giving sucient notice of a defect/fault. This
also includes if the defect arose because of your failure to follow our written/oral instructions
on installation or use of the Product.
iii) If you alter or repair the product without prior written consent by us, this will void the
warranty.
iv) Defects caused by the Product being subjected to any of the following: inadequate clean-
ing, rough handling, corrosion, misuse,
spillage of food or liquid, inuence from chemical products or other acts beyond Smarter’s
reasonable control, unless the defect was caused directly by defects in materials or workman-
ship.
v) Defects caused by employing the Product to other than its intended use.
vi) The product has been used outside the region it was produced for.
Please note no repair or replacement will extend or renew the warranty period. Original or
replacement parts or replacement Products provided under this Warranty will be covered by
this Warranty for the remainder of the original Products Warranty period or 30 (thirty) days
from the date the repaired or replacement Product is received, whichever is longer, or for any
additional period that may be required by applicable law.
This product comes with free cloud connectivty and wireless usage for the lifetime*of the
product during which Smarter will continue to support and maintain the applications and
connected features of this product. If you wish to continue services after expiry, please visit
smarter.am/cloudservices. For full terms and conditions and further information on the prod-
ucts lifetime connectivity period, please visit www.smarter.am/cloudservices.
The Smarter logo and Smarter FridgeCam is a trademark of Smarter Applications Limited, reg-
istered in England. Company Number 08608729. Due to continued product development, the
illustrations and functionality may dier slightly from this manual. Patent Pending, designed
in the UK. Copyright Smarter Applications Ltd 2017.
Smarter Applications Ltd. 1 Fellmongers Path, London, SE1 3LY, United Kingdom.

IMPORTANT NOTE:
ELECTRICAL RATINGS
5V , 2A
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; and (2) This
device must accept any interference received, including interference that may cause unde-
sired operation.
Caution: To maintain compliance with the FCC’s RF exposure guidelines, place
the unit at least 20cm from nearby persons.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates—and can radiate—radio frequency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment oand on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
the compliance with the FCC’s RF exposure guideines, place

The provided shielded USB cable must be used with this unit to ensure compliance with the
class B FCC limits.
Warning: Changes or modications to this unit not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equipment.
PRIVACY
We’re committed to being open and honest about how we use data. We will always ask for
permission before sharing personally identiable information, such as your email address, and
we keep your data safe and secure. Go to smarter.am/privacy to learn more about our Privacy
Policy.
Warning: Changes or modications to this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

FRANCOIS - ITALIANO - DEUTSCH - ESPANIOL
MODEL SFC01

ATTENTION
Important mode d’emploi et instructions relatives à la sécurité
Pour de plus amples informations sur les caractéristiques et le réglage de l’appareil-photo,
téléchargez le mode d’emploi du produit en ligne en allant sur smarter.am/help.
• Veuillez toujours vous assurer que lorsque que votre appareil-photo est en
service ou dans le réfrigérateur, le logement est entièrement fermé et que tous les joints y
compris le couvercle du micro USB est fermé et scellé.
Respectez les précautions nécessaires en manipulant les piles. Les piles peuvent fuir ou
exploser si elles ne sont pas manipulées correctement.
Respectez les précautions suivantes pour éviter que l’appareil-photo n’explose ou s’enamme
:
• Ne le laissez pas tomber, ne le démontez pas, ne l’ouvrez pas, ne l’écrasez pas,
ne le tordez pas, ne le déformez pas, ne le perforez pas, ne le déchiquetez pas, ne le mettez
pas dans un four à micro-ondes, ne l’incinérez pas ou ne peignez pas l’appareil-photo.
• N’insérez pas de corps étrangers dans aucune des ouvertures de l’appar-
eil-photo, tel que le port USB.
• N’utilisez pas l’appareil-photo s’il a été endommagé par exemple, s’il est fêlé,
perforé
• Ou s’il a été endommagé par de l’eau. Le démontage ou le perforage de la
batterie (qu’il soit intégré ou démontable) peut causer une explosion ou un incendie.
• Ne séchez pas l’appareil-photo ou la batterie avec une source extérieure de
chaleur telle qu’un four à micro-ondes ou un sèche-cheveux.
• Ne versez pas directement de l’eau sur le produit ou ne le submergez pas dans
l’eau.
• Rangez l’appareil-photo hors de portée des enfants et des mineurs.
• N’utilisez pas de dissolvants organiques tels que l’alcool, la benzine, ou les
diluants pour nettoyer le produit.
ATTENTION : Ne le placez pas près d’une amme ou d’une source de chaleur, telles que des
bougies allumées, sur le produit ou à proximité.
En chargeant l’appareil-photo, ne manipulez pas la prise ou le chargeur avec des mains
humides. Si vous ne respectez pas ces précautions vous pouvez être électrocuté.
Si vous utilisez un chargeur mural à la place d’un chargeur mural Smarter cela peut endom-

mager la batterie de l’appareil-photo et pourrait causer un incendie ou une fuite. Utilisez
seulement les chargeurs étiquetés : puissance de sortie 5V 2A. Si vous ne connaissez pas
la tension et le courant de votre chargeur, utiliser le câble USB inclus pour charger l’appar-
eil-photo à partir de votre ordinateur.
PRÉCAUTION : En utilisant le produit près d’un autre dispositif, lisez le mode d’emploi de ce
dispositif pour toutes les instructions de sécurité. Pour limiter de potentielles interférences
avec d’autres émetteurs-récepteurs numériques, éteignez votre appareil-photo partout où
l’appareil photo est interdit ou quand il peut provoquer des interférences. Ne bloquez pas
les orices de ventilation de l’appareil-photo car la chaleur émise pourrait vous blesser et
endommager l’appareil.
NOTICES : Éviter d’exposer votre appareil-photo ou la batterie à des températures très froides
ou très chaudes. Les températures basses ou élevées peuvent temporairement réduire la
durée de vie de votre batterie ou empêcher votre appareil-photo de fonctionner correcte-
ment. Évitez les changements extrêmes de température ou l’humidité quand vous utilisez
l’appareil-photo ou la télécommande, parce que de la condensation peut s’accumuler ou
s’installer à l’intérieur du produit.
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Respectez tous les avertissements
4. Suivez toutes les instructions.
5. Nettoyez seulement avec un tissu sec.
6. Ne bloquez aucun orice de ventilation.
7. Ne le mettez pas près d’une source de chaleur quelconque, telle que des radia-
teurs, des registres de chaleur, des fourneaux, ou d’autres appareils produisant de la chaleur.
8. Protégez le l électrique an de ne pas marcher dessus ou de ne pas le pincer
en particulier au niveau des connecteurs, du réceptacle de branchement et l’endroit où ils
sortent de l’appareil pendant le chargement.
9. Utilisez uniquement les attachements/les accessoires et les montages spéciés
par le fabricant.
10. Débranchez cet appareil pendant les éclairs ou s’il est inutilisé pendant de
longues périodes.
11. Faites-en sorte que tous les services d’entretien soient eectués par un

technicien spécialisé L’entretien est exigé quand l’appareil a été endommagé d’une manière
quelconque, comme quand la prise est endommagée, qu’un liquide a été renversé ou que des
objets sont tombés dans l’appareil, ou lorsque l’appareil ne fonctionne pas normalement ou
qu’il est tombé.
Avertissements relatifs à la batterie
ATTENTION : Le bloc-pile ne doit pas être exposé à une chaleur excessive telle que le soleil,
l’incendie ou toute autre source de chaleur similaire.
• N’enlevez pas la batterie de son boitier ou ne démontez pas le boitier.
• Ne démontez pas, n’ouvrez pas ou ne déchiquetez pas le bloc-pile ou les
éléments de la batterie.
• Ne changez pas la batterie.
• Utilisez seulement la batterie fournie et pré-adaptée dans l’appareil-photo.
• N’exposez pas les piles ou le bloc-pile à une source de chaleur ou près d’un feu.
Évitez de le ranger en plein soleil.
• Ne court-circuitez pas la batterie. Ne rangez pas les batteries dans une boîte
ou un tiroir où elles peuvent se court-circuitez ou être court-circuitez par d’autres objets
métalliques.
• N’exposez pas les piles ou l’appareil-photo à un choc mécanique.
• Si la batterie fuit, ne laissez pas le liquide toucher votre peau ou pénétrer vos
yeux. Si vous avez touché le liquide, lavez la zone aectée avec beaucoup d’eau et consultez
un médecin.
• N’utilisez aucun autre chargeur que celui qui vous a été spéciquement fourni
pour fonctionner avec votre appareil.
• N’utilisez aucun bloc-pile ou cellule de batterie n’étant pas adaptée pour l’appa-
reil.
• Ne mélangez pas les cellules de batterie provenant de diérents fabricants, de
diérentes puissances, de diérentes dimensions ou de diérents modèles dans l’appareil.
• Tenir les batteries hors de la portée des enfants.
• Consultez un médecin immédiatement si vous avez avalé une batterie
• Maintenez les batteries propres et sèches.
• Essuyez les bornes de batterie avec un tissu sec propre si elles deviennent sales.
• Les batteries doivent être chargées avant d’être utilisées. Utilisez toujours le