SmartLine SmartPoint T User manual

User Manual
CHECKTRACECONTROL
SmartPoint/SmartPoint One
Wireless temperature data logger with
• humidity sensor
• external temperature sensor
• external reed sensor.
Info: The user manual is valid for all SmartPoint and SmartPoint One models. For examples in the manual we only use the Smart-
Point model.
PRODUCT
RANGE
• SmartPoint T
Wireless temperature datalogger
• SmartPoint T/H
Wireless temperature and humidity datalogger
• SmartPoint T/W
Wireless temperature datalogger with external sensor
• SmartPoint T/ERS
Wireless temperature datalogger with external reed
sensor
• SmartPoint One T
Wireless temperature datalogger
• SmartPoint One T/H
Wireless temperature and humidity datalogger
• SmartPoint One T/W
Wireless temperature datalogger with external
sensor

2
User Manual
CHECKTRACECONTROL
SmartPoint/SmartPoint One
Table of Contents
1. SmartPoint models / SmartPoint One models 3
2. SmartPoint descripon 5
3. SmartPoint acvaon 5
3.1 Stock keeping 5
 3.2Operaonalcheckinhibernaonmode 5
 3.3Acvaon 6
4. SmartPoint operaon 6
4.1Mounng 7
4.2 Extended sleep 8
4.3 Logging 9
 4.4Operaonalcheckinacvemode 9
 4.5Operaonalcheckbeforeuseasmonitoringdeviceinashipment 9
5. Calibraon 9
6. Important Informaon 10
6.1Storageandacvemodecondions 10
 6.2Liability 10
 6.3Baery 10
7. Regulatory informaon 10
8. Support/Contact 11

3
User Manual
CHECKTRACECONTROL
SmartPoint/SmartPoint One
1. SmartPoint models
Model Use case Temperature sensor accuracy
(withoutcalibration,typical)
Additional sensor and its accuracy (withoutcalibration,typical)
Indicative useful lifetime
SL-SP-T Facility monitoring /
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
up to 3 years
SL-SP-T/H Facility monitoring /
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
Relativeairhumidityin%,typical
accuracy±2.0%RH
up to 3 years
SL-SP-T/1W Facility monitoring
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
External temperature sensor ±1.0°Cfrom–40°Cto–10°C ±0.5°Cfrom–10°Cto+85°C
up to 3 years
SL-SP-T/ERS Facility monitoring ±1.0°C(max)from –40°C to 0°C
±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
External reed sensor to detect open/ closestateofdoors,hatchesetc
up to 3 years
Info:TheSmartPointmeasurestheambienttemperatureandnotthequalityofthemonitoredgoods.Itspurposeistosignalifproductqualityevaluaonisrequired.

4
User Manual
CHECKTRACECONTROL
SmartPoint/SmartPoint One
SmartPoint One models
Model Use case Temperature sensor accuracy
(withoutcalibration,typical)
Additional sensor and its accuracy (withoutcalibration,typical)
Indicative useful lifetime
SL-SP-TO Facility monitoring
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
up to 1 year
SL-SP-T/HO Facility monitoring
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
Relativeairhumidityin%,typical
accuracy±2.0%RH
up to 1 year
SL-SP-T/1WO Facility monitoring
Shipment monitoring
±1.0°C(max)from –40°C to 0°C ±0.5°C(max)from 0°C to +65°C ±1.0°C(max)from +65°C to +85°C
External temperature sensor ±1.0°Cfrom–40°Cto–10°C ±0.5°Cfrom–10°Cto+85°C
up to 1 year
Info:TheSmartPointmeasurestheambienttemperatureandnotthequalityofthemonitoredgoods.Itspurposeistosignalifproductqualityevaluaonisrequired.

5
User Manual
CHECKTRACECONTROL
SmartPoint/SmartPoint One
2. SmartPoint description
Model
LED
Flashlight
Product
Type
Arcle
No.
SmartPoint front view
Company
Informaon
IPClass
FCCandIC
Informaon
oponal
Humidity
Sensor
SmartPointbackview
3. SmartPoint activation
SmartPointsaredeliveredin“hibernaon”modeandtheyneedtobeacvatedbeforetheycanbeused.See3.3howtoacvate
the SmartPoint.
3.1 Stock keeping
Inhibernaonmode,SmartPointsarenotacvelymeasuringandreporngsensorreadings.Thismodeensuresthattheenergy
storedinthedevicebaeryisonlylileusedduringstockkeepingofthedevice.Upondelivery,thedevicesareinhibernaon
modeanddonotshowanyacvityonthedeviceitselfnorinSmartView.
IfyouplantonotacvelyusetheSmartPointinthenextmonthofdelivery,itisadvisedtokeepthedeviceinhibernaonmode.
OncetheSmartPointisacvated,itcannotbeputbacktohibernaonmodeagain.
3.2 Operational check in hibernation mode
TheoperaonalfunconingoftheSmartPointcanbecheckedinhibernaonmode.
Duringthecheck,theLEDofthedevicewillblinkandtheSmartPointtransmitsafewmessagestoSmartView,ifanacve
SmartLine network is detected.
•PlacetheSmartPointontheindicatedposionontheSmartMat.
• Hold it steady in place.
•Aer 5 seconds,theLEDshowsacvityandtheSmartPointcontactstheSmartLine
network.
•KeeptheSmartPointsteadyinplaceforanaddional15 – 25 seconds.
TheLEDasheslongfor5 mes,removetheSmartPointimmediately from the Smart-
Mat.

6
CHECKTRACECONTROL
3.3 Activation
TheSmartPointcanbewokenfromhibernaonmodebyusingaSmartMat.
OnlyacvateSmartPointswhenaSmartLinenetworkisacveandtheSmartPointsarewithin5meterrangeofaSmartGateor
SmartRouter.Beforeacvaon,checkiftheSmartGateorSmartRouterindicateacvenetwork(seeSmartGateorSmartRouter
manual).
Informaon:TheSmartPointhasaninternalclockwhichisusedtomestampsensorreadings.Uponacvaon,theinternalclock
ofthedevicemustbesetbyaSmartLinenetwork.
•PlacetheSmartPointontheindicatedposionontheSmartMat.
•Holditsteadyforabout5 secondsunltheLEDblinks.
• Remove it immediately from the mat.
• If it is placed on the SmartMat for longer than 15 – 25 seconds,theSmartPointgoes
tothehibernaonagain.(Onlyvalidduringtheacvaonprocess.)
•Iftheprocedurehasbeencarriedoutcorrectly,theLEDblinksshortlyevery
45 seconds.
Informaon:SomemestheacvaonoftheSmartPointisnotsuccessfule.g.duetomovementoftheSmartPoint.Retrythe
acvaonprocedureaer15minutes.
KeeptheSmartPointclosetotheSmartGateorSmartRouterfor30minutes.Duringthe30minutes,otherSmartPointsmaybe
acvated.
Aer30minutes,verifytheoperaonofthedeviceinSmartView.FindtheserialIDoftheSmartPointinthelistofyourdevicesin
SmartViewandverifythatoneormorereadingsoftheSmartPointhaveappeared.
4. SmartPoint operation
Aeracvaon,theSmartPointmeasuresandreportssensorvaluesbasedonafactoryconguredinterval.Measurementpoints
arealsostoredintheSmartPointwhennoradioconneconcanbeestablished.ThismakestheSmartPointsuitabletomonitor
goods during shipment.
User Manual SmartPoint/SmartPoint One

7
CHECKTRACECONTROL
4.1 Mounting
TheSmartPointhasasinglemounngholeinthecenterofthecasing.Thiscanbeusedinvariouswaystoaachthedevicetothe
requiredsurface(e.g.bolt,cord,orewrap).
Warning:Avoidtheuseofmetallicormagnecalmaterialsforthemounngmaterial.
Info:TheplacementoftheSmartPointand/orthematerialssurroundingit,canhavea(negave)impactontheradiorange.Pre-
vent the use of any metallic materials around the device. Install the device with an air gap of >4 cm from walls.
SL-SP-T/ERS mounting
Status: door closed Status: door opened
MEDER
Magent M04 H6 / 8
Model:SL-SP-T/ERS
ArticleNo:905-SMPT-024-016
00:0e
MEDER
Magent M04 H6 / 8
Model:SL-SP-T/ERS
ArticleNo:905-SMPT-024-016
00:0e
InstalltheSmartPointT/ERSwithexternalreedsensorasdepictedabove.
Warning:Ensurethattheexternalsensorcablecannotbepulledoutofthedevice.Anyforceappliedtothecablemaycauseda-
mage,evenifthedamageisnotvisiblefromoutside.Thecablehaslimitedpullrelieve.
SL-SP-T/H and SL-SP-T/HO mounting
•Ensurethatproperairowispossiblearoundtherelaveairhumiditysensor.
•Donotblocktheopeningofthesensor.
•Keepthesensorclean.Dustandcondensaononthesensormembranecancauseanunwantedeectonthesensor.
•Donotspraywaterdirectlyonthesensoropening.Thismaydamagethemembraneprotecngthesensorandelectronics.
Magnet Magnet
Reed-
sensor
Reed-
sensor
Smart-
Point
T/ERS
Smart-
Point
T/ERS
Status: door closed Status: door opened
User Manual SmartPoint/SmartPoint One

8
SL-SP-T/1W and SL-SP-T/1WO mounting
Example:Installaoninanairfreightcontainer.
InstalltheSmartPointT/1WorT/1WOwithexternaltemperaturesensorasdepictedabove.
Warning:Ensurethattheexternalsensorcablecannotbepulledoutofthedevice.Anyforceappliedtothecablemaycauseda-
mage,evenifthedamageisnotvisiblefromoutside.Thecablehaslimitedpullrelieve.
4.2. Extended sleep
WhenaSmartPointcancommunicatewithaSmartGateorSmartRouter,itimmediatelytransmitsameasurementpointwhenit
becomesavailable.ThemeasurementpointwillbeavailableinSmartViewwithinserveralminutes.
IftheSmartPointisoutsidetherangeofaSmartLinenetwork,itenters“extendedsleep”mode.Inthismode,theSmartPoint
connuestomeasureasregular,however,itdoesnotaempttotransmit.
Informaon:SmartPointsarenottransmingwhenoutsideSmartLinenetworkrangeandarethereforeallowedtomonitorair-
cargobymostairlines.Please,checkwithairlinebeforeuse.
WhenaSmartPointiswithinrangeofaSmartGateorSmartRouter,thedeviceautomacallyexitsthe“extendedsleep”mode.
Thismaytakeupto30minutes.Aer30minutes,newmeasurementpointsappearinSmartView.
Tip:WhenaSmartPointisswipedoveraSmartMat,it
immediatelyexitsthe“extendedsleep”modewhenin
rangeofaSmartGateorSmartRouter.
CHECKTRACECONTROL
Model:SL-SP-T/ERS
ArticleNo:905-SMPT-024-016
00:0e
ControlPanel
(outsideCon-
tainer)
SmartPoint
T/W
External
Sensor
(insideContai-
ner)
User Manual SmartPoint/SmartPoint One

9
CHECKTRACECONTROL
4.3. Logging
WhentheSmartPointcannotestablishconneconwithaSmartGateorSmartRouter,measurementsarestoredinthememory
ofadevice.SmartPointshavecapacitytostore8000measurementpoints,whichequalscirca3monthsofmeasurementdata(at
standardlogginginterval).
ThestoredmeasurementpointsareautomacallytransmiedtoSmartViewwhentheSmartPointcanreestablishaconneconto
aSmartGateorSmartRouter.
Informaon:Insomecases,theSmartPointisnotabletotransmitallstoredmeasurementsamples.Ensurethatthedeviceis
placedinthenetworkrangefromaSmartGateorSmartRouter.Persistentweakradiolinksaectthedatacommunicaonsuccess
rateseverlyandtheSmartPointisnotabletosendthestoreddata.Thestoredmeasurementpointsaretransmiedatarateof4
measurement points per minute.
EnsurethataSmartPointislongenoughinrangeoftheSmartLinenetworktosendallstoredinformaon.E.g.oneweekofstored
data(atstandardlogginginterval)istransferredincirca4hoursaertheSmartPointwasbroughtintorangeofaSmartLinenet-
work.
WhenaSmartPointhasbeenmonitoringashipmentoutsidetherangeofaSmartLinenetwork,butisnowinsideanetworkagain,
thecurrentmeasurementsarevisible,whilesimultaneouslythestoredmeasurementsaretransmied.InSmartView,adatagap
maybevisibleduringthemeittakestheSmartPointtotransmitstoreddata.
EventhoughtheSmartPointneedsmetotransmitstoredmeasurements,itenablesyoutoactuponreal-mealarmswhenever
it is in range of a SmartLine network.
4.4. Operational check in active mode
ItisrecommendedtotestandinspectSmartPointsinacvemoderegularly.
• Never use SmartPoints with damaged or open enclosure.
• Never use SmartPoints with damaged external sensor.
•NeveruseSmartPointswithdamagedbaerypack.
•NeveruseaSmartPointwithdamagedlabel.
•NeveruseSmartPointswithpunkturedmembraneofhumiditysensors
AlthoughSmartPointsreportalarmstoSmartViewwhentheirbaeryislow,itisgoodpraccetoverifydevicesbeforetheyare
usedforcricalmonitoring.Useaerthedenedusefullifemeisunreliableandshouldnotbeusedforcricalmonitoring.
ThereareafewmethodstocheckiftheSmartPointisslloperaonalandhasnotrunoutofbaerypower.
1.AeraSmartPointhasbeenacvated,every45secondstheLEDwillshortlyash.
Tip:DirectsunlightorotherbrightlightsourcemaymakeitdiculttonocetheshortLEDblink.Checkthedeviceinshadowor
dimmedlightcondions.
2.WhenanacveSmartPointisswipedacrosstheSmartMat,theLEDwillashimmediately.
Informaon:FlashingoftheLEDmeansthattheSmartPointisfunconing.TheLEDdoesnotindicateiftheSmartPointiscon-
nected or not.
3.PeriodicallyreviewthestatusoftheSmartPointinSmartView.Nolowbaeryindicaonsshouldbepresentandthelast
reportedmessageshouldberecent.
WhenSmartViewindicatesthatthebaeryofaSmartPointislowand/orthedevicedoesnotshowLEDacvity,theSmartPoint
shouldnolongerbeused.
4.5. Operational check before use as monitoring device in a shipment
WhenaSmartPointisgoingtobeusedasamonitoringdeviceinashipment,itisimportanttoallowittosetitsinternalclock
correctlybeforeitleavetheSmartLinenetwork.
SwipetheSmartPointacrossaSmartMatwhilethedeviceis<5mawayfromacveSmartGateorSmartRouter.TheLEDofthe
SmartPointmustash.KeepthedeviceneartheSmartGateorSmartRouterfor5minutes.Thenitisreadytobeusedforship-
ment monitoring.
5. Calibration
Berlingeroersacalibraonservicewhichallowsthecalibraonoftheinternalsensor(s).
•Withoutcalibraon,thesensoraccuracyisasstatedintableSmartPointModels.
•Calibraonisonlyvalidduringtheperiodstatedonthecalibraoncercate.
User Manual SmartPoint/SmartPoint One

10
CHECKTRACECONTROL
6. Important Information
6.1. Storage and active mode conditions
•Beforeacvaon,theSmartPointmustbestoredbetween10°Cand25°Cinanon-condensingenvironment.
•Aeracvaon,acceptableoperaonaltemperatureis–40°Cto+85°C.
•DonotexposetheSmartPointtomechanicalimpact/forceexceedingthenormdenedinEN60068-2-31:2008andEN60068-2-
6:2008.
•TheSmartPointhasbeendesignedtoberesistanttomoistureanddustcondionsthatcanbeexpectedinwarehouses,during
transportaon,storageinfridges/freezersetc.Ithasnotbeendesignedforoutdooruse.Donotpuncturethemembraneofthe
relaveairhumiditysensor.
Warning:Donotfullysubmergetheproductinwater.Excessiveexposuretodirectsunlightmaycausediscoloraonoftheenclo-
sureand/orreduconofthemechanicalrobustness.Donotusehigh-pressurecleaningdirectlyontheSmartPoint.Donotuse
chemicals to clean the SmartPoint.
6.2 Liability
Themanufacturershallnotbeheldliable:
•Ifthedevicewasusedbeyondthemanufacturer’sgivenlimitaons.
• For any claims due to the improper storage and use of the device.
•Foranyproblemswiththetemperaturecontrollingand/orcoolingunit.
•Forthebadqualityofanymonitoredgoods.
•Forincorrectreadingsifthedevicewasusedbeyonditsexpirydate.
Warranty:SmartPointandSmartPointOne1yearfromdateofdelivery.Baerypackisexcludedfromwarranty.
6.3 Battery
TheSmartPointscontainanon-rechargeableLithiumbaery.Pleasepaystrictaenontothefollowingpoints:
•ThehousingoftheSmartPointmustneverbeopenednordestroyed.
•NeverexposetheSmartPointtotemperaturesabovetheallowedrange(re,oven,microwaves,etc.).
It may cause serious injuries.
• Always keep the SmartPoint out of the reach of children.
•ThebaerycomplieswithIATADGRPackagingInstrucon970Secon2andisthereforenotconsideredasdangerousgood.
ConsultIATAregulaonbeforeuseinairfreight.
•DisposeorrecycletheSmartPointinaccordancewiththeWEEE2012/19/EUguidelinesoryourlocalregulaons.
Thedevicemayalsobereturnedtothemanufacturerforproperrecycling.
7. Regulatory information
FCC INFORMATION (USA):
ThisdevicecomplieswithPart15oftheFCCRules.Operaonissubjecttothefollowingtwocondions:1.Thisdevicemaynot
causeharmfulinterference,and2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseun-
desiredoperaon.Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant
topart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableproteconagainstharmfulinterferenceinaresiden-
alinstallaon.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
withtheinstrucons,maycauseharmfulinterferencetoradiocommunicaons.However,thereisnoguaranteethatinterference
willnotoccurinaparcularinstallaon.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionrecepon,which
canbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore
of the following measures:
• Reorient or relocate the receiving antenna.
•Increasetheseparaonbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Cauon:Anychangesormodicaonsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser‘s
authoritytooperatethisequipment.
User Manual SmartPoint/SmartPoint One

11
CHECKTRACECONTROL
IC INFORMATION (CANADA):
ThisdevicecomplieswithRSS-210oftheIndustryCanadaRules.Operaonissubjecttothefollowingtwocondions:
1)thisdevicemaynotcauseinterferenceand
2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperaonofthedevice.
ICRadiaonExposureStatement:ThisequipmentcomplieswithICradiaonexposurelimitssetforthforanuncontrolledenviron-
ment.
Avisd’IndustrieCanada:CetappareilestconformeàlanormeCNR-210desrèglementsd’IndustrieCanada.Sonfonconnement
estsujetauxdeuxcondionssuivantes:
1)Cetappareilnedoitpasprovoquerd’interférenceset
2)Cetappareildoitacceptertouteslesinterférences,ycompriscellespouvantentraînersondysfonconnement.
Avisd’IndustrieCanadasurl’exposionauxRayonnements:Cetappareilestconformeauxlimitesd’exposionauxrayonnements
d’IndustrieCanadapourunenvironnementnoncontrôlé.
EU INFORMATION (EUROPEAN UNION):
Product: SmartPoint
Models:SL-SP-T,SL-SP-TO,SL-SP-T/H,SL-SP-T/HO,SL-SP-T/ERS,SL-SP-T/1W,SL-SP-T/1WO
ThisequipmentisinconformancewiththeessenalrequirementsandotherrelevantprovisionsofDirecve2014/53/EU(RED)
and2011/65/EU(RoHS).
Standards Applied:EN300328V2.1.1,EN301489-1V2.2.0,EN301489-17V3.2.0,EN62311:2008,EN62368-1:2014
RF specicaons:2405-2480MHz,16Channels,5dBm
Note:Incaseofdisposal,thebaeryshallberemovedandoeredatalocalcolleconpoint.
8. Support/Contact
Ifyouneedanysupport,pleasedonothesitatetocontactoursupportteam: [e-mail], [phone].
201806_Release_V2
Subjecttochange.Pleasenotethatallinformaoninthisdocumentiscorrectatthemeofpublicaon.
Duetoourpolicyofconnuousproductdevelopment,wereservetherighttochangethisinformaonwithoutpriornoce.
Berlinger&Co.AG
Mieldorfstrasse2
9608Ganterschwil
Switzerland
Tel. +41719828811
E-Mail [e-mail]
Web www.berlinger.com
User Manual SmartPoint/SmartPoint One