SmarTrike 675 A User manual

USA: 1-855-SMTRIKE
(1-855-768-7453)
UK: [phone]
9:30am – 5:00pm Monday to Friday
Not Bank Holidays or weekends.
You can also email us: [email protected]
for assistance and advice.
Thank you for buying smarTrike,
If you have any assembly issues or are missing
a part, please call us for assistance. Our
smarTrike® assembly experts will assist you.
DO NOT RETURN TO THE STORE
If you are experiencing problems with this
product, please call our HELP LINE.
www.youtube.com/user/SmartTrikeOcial
www.smarTrike.com
-1-
675/650/695/195/690
195/690 695 650
675 A 675 B

-2-
A B
E F G H
DC
1665100 607130 X2
X4 X2
607120 607210
607150 607220 607200607110
KJI
695360665140607141
2
L M N O
675B
650/195/690
675/650/695/195/690
R1 SR2
650
675
695/195/690
607190
665170
675B/695
195/690/650
P Q2
675A
Q1
675A
3675280 665160 695280
650171 695410

-3-
Step 1 Parts needed to complete this section
- a 1a
-
a 1b
-
a 1c
NMBL
x4 x2x2
A
Place a washer (L), a wheel (B) and
another washer (L) on the back axle.
Firmly insert black plug (M) into axle
opening, as shown. Align spring lock with
dropout hole in axle and push firmly into
position, until piece "clicks" into place.
the hole (as shown)
By using the Phillips
screwdriver (N), screw
into part B. Firmly tighten
clockwise.
CLICK!

-4-
Step 2 Parts needed to complete this section
ED
C
- a - b 2a 2b
the hole (as shown)
Insert part E into the
body of the trike all the
way through the hole.
Insert part D into part
C all the way through
the hole.

For 10M+ pull the
clutch away from the
wheel.
CLICK!
-5-
Step 3 Parts needed to complete this section
Push the apple rmly down to
insert, slightly turn until you
- a 3a
CLICK!
ly down to
insert, slightl you
" k r
- b
3b
Push the apple firmly down to insert,
slightly turn until you hear a "click". Make
sure white connector is not visible.
Insert the wheel all the way
through the body of the trike until
the bolt meets the retaining head.

-6-
Step 4 Parts needed to complete this section
NF
4a
4c
4b
Attach basket firmly to vertical
frame, use removed screw and
turn clockwise until secured.
Push basket (F) firmly onto
rear axle until it "clicks" into
position (see 1 & 2).
By using the Phillips screwdriver
(N), remove screw by turning
counter clockwise.
CLICK!
CLICK!
2
1

CLICK!
5a
5c
5b
-7-
Step 5 Parts needed to complete this section
NHG
CLICK!
Take the seat (G), push the screw through the
seat hole. Screw into the most rear facing
hole and firmly tighten with Allen key (N).
By using the "Allen" key (N), remove
screw by turning counter clockwise.
2
With little force, push part H into the apple's
holes until you hear a "click". Place back
holes into protrusions on the back of the seat.
1

12
Insert part J into part I. Align the
hole of part I with the correct hole
in part J. Use Phillips screwdriver
(N) to attach the screw to the nut.
WARNING: Nut must be inserted
correctly and secured.
Keep the nut in place, remove
the screw from part I by
turning counter clockwise.
-8-
Steps 6-7 Parts needed to complete this section
7a
NJ
I
1 2
WARNING: This product should be used on
safe ground, it should not be used near steps,
slopes, roadways, public highways or wet areas.
6a
2
1
Remove the securing pin with
securing lock.
CLICK!
6b
1
2
3
WARNING: Ensure safety
pin is inserted correctly
and secured.
Insert the parent handle (I) into the retaining
hole on rear of trike. Insert the pin with
safety lock. Turn the pin until you hear a click.

1
3
2
4
-9-
Steps 8-9 Parts needed to complete this section
8a 8b
K
Max. load of basket
2.2 lb / 1 kg.
Attach handles of the bag (K) to
parent handle hook. Wrap hook and
loop strap around the parent handle.
Pull the elastic bands of the bag
around the sides of the basket.
9a
9b
For the 10+ month stage, open the
footrests by pulling it down.
Pull down both sides of the
footrest.

CLICK!
675 A
-10-
Step 10 Parts needed to complete this section
Q2Q1P
10c
675B/695
195/690/650
675B/695
195/690/650
675A675A
10a
10b
Insert part P into the the safetybar. Attach
hook cords, onto back seat protrusions.
Insert part Q1 into the the safetybar, until
you hear a "click". Slip the safety belt
through the loop of the seat cover.
10a
10b
CLICK!
Insert part Q2 into the the
safetybar, until you hear a "click".
10d

CLICK!
675 A
-11-
675 A
Insert part R1 into the
the headrest until you
hear a "click".
R1

675B/195/690
11a
11b
-12-
675 B / 195 / 690
CLICK!
Align part (S) into the designated
holes in the center of the handlebar
and push down firmly until it "clicks".
SR1
CLICK!
Insert part R1 into the
the headrest until you
hear a "click".

-13-
695
CLICK!
695
Insert part R1 into the
the headrest until you
hear a "click".
R1

-14-
650
650
11a
11b
CLICK!
SR2
CLICK!
Insert part R2 into the
the headrest until you
hear a "click".
Align part (S) into the designated
holes in the center of the handlebar
and push down firmly until it "clicks".

1
2
-15-
When the clutch is pulled away
from the wheel there is no
pedal control and the wheel is
in a free-wheel position
Parent Control
10M+
Child Control
2
2b
2a
For the 24+ months stage,
fold up left and right footrest.
Push release button to place it
back into frame.
1
1
2
2
1
180
1
2
3
1

-16-
66528057603
2
1
3
4
5
6a 6b
When the clutch is pushed closed
and aligned with the front wheel,
child has pedal control.