Smartswitch CPWIFISW1 User manual

CPWIFISW1
WiFi Smart Switch Manual
Features:
•Connects to home WiFi
•Turn devices on and off remotely through the App
•Manage numerous smart switches and other Tuya compatible smart devices from
one App
•Compatible with Amazon Alexa, Google Assistant & Siri (via Shortcuts)
•Set schedules and timers
•Switch device on automatically when you get home (Beta)
•Share access with other users permanently or for a set time period
•Remove access to other users instantly
•Latching or timed mode
•Group device management
•Built in 433.92MHz receiver for remote controls
Specification:
•Input voltage: 7-32Vac/dc or 5V Micro-USB
•Max current load: 10A
•WiFi standard: 2.4GHz, 802.11 b/g/n
•Standby/max current draw: 80mA/115mA
•Dimensions: 73 x 46 x 30mm

Device setup
1. Download the ‘Tuya Smart’ or ‘Smart Life’ App by searching in the mobile
App stores or scanning the following QR codes.
2. Create an account in the App, or if you already have an account just login.
3. Supply power to the WiFi switch and wire the relay output to the device you
are controlling.
Reset
Manual switch
External switch interface
Network indicator

Wiring examples
Light
Set mode to latching
Gate
Set both outputs to
inching mode - 2 secs
Refer to gate panel
manual for Start terminals
CPWIFISW1-TX KIT
Set output to inching mode - 2 secs
Refer to gate panel manual for Start terminals
RX-2

4. Power on the device.
5. Reset the device by pressing the match button for 5 seconds until the red
network LED indicator is flashing quickly every 0.5 seconds (if the network
indicator is already flashing quickly, skip this step).
6. In the App, click the ‘+’ icon in the top right corner. Select ‘Auto Scan’, after a
few seconds the device will be found. When the device is found click ‘Next’ or
‘Go to add’.
7. Select a 2.4GHz WiFi network, enter your password and click ‘Next’.
8. Name the device.
9. When the network is disconnected, the switch will automatically change to
Bluetooth control from the phone. (Must be within range).
10. Click the On/Off button on the App to control the device.

App functions
1. Set the following:
Countdown (delay before the output activates)
Weekly schedules (up to 8 per device)
Circulate (set the device to switch on and off on a loop)
Random
Inching (set the output timed)
Tap here to enter
function operation
interface.
4. Smart scenes
Siri
1. Countdown
Schedule
Circulate
Random
Inching
2. Relay status
RF remote control setup
3. Rename
Offline notification
Third-party control
Share Device
Create group
Remove device

2. Set the following:
Relay status (when the device is switched back on after losing power)
RF remote control setup
Tap Add
When prompted, press the remote control button you want to add within 10 seconds
The message ‘Add Success’will be displayed
To delete a remote control, swipe it to the left and tap delete
3. Edit device name & location.
Manage third party control, setup Alexa etc.
Share device with other users.
Create a group to control more than one device by a single tap.

4. Create smart scenes & setup Siri.
Please note, to use with Siri on other phones, you have to share the ‘Home’ with other accounts, rather than just
the device.
Tap ‘Me’> ‘Home Management’> Select the name of the Home > ‘Add Member’
Please also make sure that the ‘Shortcuts’ App is downloaded on the phone.
Tap the + in the
top right corner
Tap ‘Launch Tap-
to-Run’
Tap ‘Run the Device’
Select the device,
then select the
function, in this case
turning ‘Switch1’ ON
Change the name of
the scene & tap
‘Save’
Tap ‘Add to Siri’
Change the voice
command if required
& click ‘Add to Siri’

Switch the device on automatically when you get home
Please note this feature is a Beta service and requires location services to be on all the time.
Click ‘Save’ to finish. Or
to change the period
when the scene is
active, tap the 3 dots.
Tap the + in the
top right corner.
Tap ‘When location
changes’.
Tap ‘Arrive’.
Select location. Zoom in
or out to adjust activation
radius. Tap ‘Next’.
Tap ‘Run the
device’.
Set the switch to
turn ON. Tap ‘Save’.
Choosethe effectiveperiod (if
required). The ‘Night’ setting
couldbeusefulifcontrolling
lighting,forexample.