SMC Networks Barricade SMCWBR14-N2 User manual

SMCWBR14-N2 WDS Configuration Guide – Repeater
1. Log on to admin page of the router. http://192.168.2.1
ser Name: Admin (Default) Password: smcadmin
2. Go to Basic Click -> Wireless (Left Hand side Menu)
3. Scroll down to WIRELESS NETWORK SETTINGS
-> Enable Auto Channel Scan: NO Tick
-> Set Wireless Channel as 2.462 Ghz CH11
-> Channel Width: 20 MHz
-> Save Settings

4. Scroll down to Security Mode pick: WEP only in the Allowed Client Type. -> Save Settings
5. Scroll down again and type a encryption key in Key 1 -> Save Settings
6. Go to ADVANCED Click -> Advanced Wireless (Left Hand side Menu)
-> WDS Enable: Tick
-> Enter the MAC address of the repeater until you will link the WDS with
-> Save Settings

7. Go back to BASIC Click -> Network Settings (Left Hand side Menu)
-> Go to WAN PORT MODE: Pick the Bridge Mode
-> Scroll down to RO TER SETTINGS
->Change the Router IP address for your repeater unit (recommended 192.168.2.2). ->Save Settings