Smeg Oven ALFA 31XHT User manual

INSTRUCTION MANUAL

Instructions for the User
INSTRUCTIONS FOR REMOVING THE ALFA 31XHT
OVEN FROM THE CABINET
DISCONNECT THE CABINET FROM THE ELECTRICAL MAINS
UNDO THE TWO SCREWS AS SHOWN BELOW
VIEW FROM
BELOW
TO REMOVE THE OVEN FROM
THE CABINET, UNDO THE TWO
M8 BOLTS IDENTIFIED BY THE
ARROWS
FRONT
VIEW
SUPPLY
OUTLET

Instruction for the user
EXTRACT THE PULL-OUT WORKTOP RIGHT OUT AND REMOVE
IT FROM THE CABINET, APPLYING LEVERAGE TO THE TWO
RAPID RELEASE DEVICES ON THE RUNNERS. (“A” AND “B”).
REMOVE THE OVEN, TAKING CARE NOT TO DAMAGE THE
INTERNAL WIRING
(IF THE OVEN IS PULLED TOO FAR OUT AT THIS STAGE, THE
VARIOUS CABINET COMPONENTS DIRECTLY CONNECTED TO
THE OVEN MAY NOT BE CORRECTLY DISCONNECTED).

Instructions for the User
Cod. 914772553
DISCONNECT THE TWO WIRES FROM THE TANGENTIAL
COOLING FAN IN THE TOP OF THE CABINET.
DISCONNECT THE OVEN POWER SUPPLY CABLE FROM THE
CABINET TERMINAL BOARD.
MAKE SURE THAT THERE ARE NO MORE CABLES DIRECTLY
CONNECTED TO THE OVEN AND THEN SCREW ITS FEET
(SUPPLIED WITH IT) INTO PLACE.
TO TURN ON THE TANGENTIAL COOLING FAN WITH THE OVEN
OFF, TURN THE TIMER TO THE SYMBOL AND THE OVEN
THERMOSTAT TO THE SYMBOL.