$ 2SHQGRRUEXWWRQ
Press the button to RSHQWKHGRRU. Chapter 5 – Washing in-
structions – explains how the door works and how to use it.
% 212))DQGZDVKLQJSUR
JUDPPHVHOHFWLRQNQRE This knob lets you:
•switch the machine on and off by moving it in either
direction from the 2)) position (knob indicator verti-
cal)
•select ZDVKLQJWHPSHUDWXUHV within the various fab-
ric VHFWRUV by turning it in both directions
The knob does not move while the programme is running.
The programme is electronically controlled by the machine.
& 7LPHUHPDLQLQJVKRZQRQ
GLVSOD\/('
This LED indicates that the display is showing the total dura-
tion of the selected programme before the programme starts,
and the time remaining while the programme is running.
' 6SLQVSHHGVKRZQRQGLV
SOD\/('
This LED indicates that the display is showing the maximum
spin speed for the selected programme. It stays on while spin
speed is being selected with the relative button.
( +HDWLQJSKDVH/('
During the heating cycle, this LED indicates that the pro-
gramme is in the washing water heating phase.
) 'LVSOD\
The display shows the following information:
1. WLPH UHPDLQLQJ for the selected programme, given
in hours/minutes. The stated value is an estimate
based on the machine's normal operating parame-
ters (size of load, incoming water temperature, etc.).
The program time may therefore be a few minutes
longer or shorter than stated here.
2. GHOD\HG VWDUW (for models featuring this option).
Given in hours/minutes. When the time remaining
before the programme starts is less than 60 minutes,
this information is given in minutes/seconds.
3. VSLQVSHHG
4. F\FOHSDXVH - flashing STOP
5. HQGRIF\FOH - END
6. HUURUFRGHV
To find out which of the first 3 pieces of information are
shown on the display, check which of the LED's, C, D, or N
(the latter for models featuring the delayed start option) is lit.
* 6HOHFWVSLQVSHHGEXWWRQRU
VWRSZLWKWXEIXOO
Press the button repeatedly to select the required spin
speed. The following spin speeds are available:
• spin disabled and stop with tub full. The ma-
chine does not perform the final spin and ends the
washing programme with water in the tub. To drain
the water, see the explanations shown in paragraph
5.14
•IURP USP WR WKH PD[LPXP VSHHG LQGLFDWHG IRU
WKH PRGHO for FRWWRQ DQG FRORXUHG programmes,
speed increases by 100 rpm starting from 600 rpm
up to the maximum speed indicated for the model
•IURPWR USP: for V\QWKHWLFVGHOLFDWHVDQG
ZRROOHQVprogrammes, speed increases by 100 rpm