Smit Visual Chameleon Installation instructions manual

Chameleon
Modular
Acoustics
Mounting guide
GB

Magnetic
mounting strips Screws Dowels Self adhesive spacers
11208.0x8 - 118 x 44 cm 4 8 8 4
11208.0x9 - 118 x 88 cm 7 14 14 6
11208.0x4 - 198 x 49 cm 6 12 12 7
11208.0x5 - 198 x 98 cm 12 24 24 8
06
07
Congratulations with
your purchase!
Package contents - per panel
GB
Image 2
Image 1
- Zijaanzicht -
Spacers
✓ ✓ X
• The wall must be smooth (no bumps or dents) and free of obstacles.
• Magnetic surface of the strip should be completly in contact with back of the
PET -felt panel to have it’s full holding power. Always mount magnets in the
same flat plane. With bumpy walls use spacers (available in most D.I.Y. shops) to
put the magnets in the same plane. See image 1.
• Check flatness between strips by using a level. Adjust with spacers and repeat
check until all surface are in the same plane. See image 2.
• Provided screws and plugs are suited for solid stone walls. In case of other walls
make sure you choose suited mounting materials! Keep in mind that the screw
head should fit deep enough into the steel plate, because of the magnet!

Placement of magnetic strips
Start by marking out the positioning of the panels on the back wall. Ensure
that the seams have been fully marked out. This allows the strips to be
fixed in the correct position. The strips on the seams are key to ensure a
smooth transition.
We make it visible
2x screw 4x40
2x dowel 6mm
2x Ø 6mm
Magnetic strip
50x300mm
*When used in combination with whiteboard panels, please refer to the assembly
instructions ‘Chameleon Modular’ (included with the Chameleon Modular whiteboards).
± 50 mm
Modular
PET-Felt / whiteboards
Modular
PET-Felt
11208.0x811208.0x9 11208.0x411208.0x5
*
Marking panels

Smit Visual B.V.
Spaarpot 120-122
5667 KZ Geldrop
The Netherlands
T+31(0)40 - 280 85 00
F+31(0)40 - 286 76 15
E[email protected]
Wchameleonwriting.com