Smith-Victor KT750LED User manual

User Manual
Smith-Victor
-WARRANTY -
Smith-Victor warrants to the first commercial owner to be free
from defects in the material and workmanship for a period of
one (1) year from the date of purchase and will repair or
replace product found to be defective under normal use.
Warranty does not cover damage caused by shipment, by
product abuse, accident, modification, disassembly or use
beyond intended use specified by Smith-Victor. The Umbrella
Kits used with nonstandard Smith-Victor electrical
accessories will render this warranty immediately void.
This warranty is the only warranty made to any person by
Smith-Victor and is in lieu of all other expressed or implied
warranties. The remedies set forth in this warranty shall be
the exclusive remedies available to any person for breach of
this warranty. Under no circumstances shall Smith-Victor be
liable to any person for incidental or consequential damages,
whether arising out of breach of warranty or other contract,
negligence, strict liability or other tort or otherwise.
Smith-Victor •Photogenic •Dot Line
Quantum •Radiopopper •Photoflex •Cool-Lux
Speedotron •Norman •Logan
Smith-Victor is a division of PromarkBRANDS
1268 Humbracht Circle, Bartlett, IL 60103 U.S.A.
800-348-9862 or 630-830-9200
[e-mail] | www.smithvictor.com
www.promarkbrands.com
# 999583 Manual for KT750LED & KT1500LED_9-2017
Two LED Light Umbrella Kit
Model: KT750LED
Item: 401608
Four LED Light Dual
Socket Umbrella Kit
Model: KT1500LED
Item: 401609
KT750LED & KT1500LED Umbrella Kits
Featuring
LED Bulb
Model: 45LED
Item: 401900
Optional Accessory
Bluetooth LED Bulb
Model: SmartLED50
Item: 401625

Kit includes: one Case; two Light Stands; two Umbrellas;
two 45 watt LED bulbs and two Sockets.
Set Up of the Kit Components
•Set up the light stands.
•Loosen the thumb screw of the stand mount on the back of
the LED Socket Mount.
•Place the LED Bulb Socket onto the top of the stand upright
and secure by tightening the thumb screw.
•Insert umbrella into the umbrella holder below the socket
and open until it locks in place.
•Screw in the LED bulb(s), being careful to not cross thread
the lamp with the socket.
•Plug into outlet after all parts are assembled.
•To disassemble the unit, reverse the process described
above.
WARNING:
•Do NOT plug the unit into an electric socket until the kit is
fully assembled and LED bulbs are in place. Failure to
observe this warning could result in electric shock, injury and
even death.
•Appliance must only be used with rated voltage and
frequency.
•Avoid unplugging the power by pulling the power cord.
•Do not touch the power cord with wet hands.
•Never attempt to insert any metal objects into the cooling
holes of the lamp.
•Avoid moving the umbrella/stand by pulling the power cable.
•Discontinue use if the unit is damaged, especially the power
cord and socket.
•Avoid exposure to moisture.
•Indoor use only.
•In the event service is needed, contact Smith-Victor.
What’s in the Box:
Kit includes: one Case; two Light Stands; two Umbrellas;
four 45 watt LED bulbs and two Dual Sockets.
Model: KT750LED
Item: 401608
Two LED Light Umbrella Kit
Model: KT1500LED
Item: 401609
Four LED Light Dual Socket Umbrella Kit