SMONEX GNOR01 User manual

ONE SMART BOX
NOT A CHILDREN TOY
AGE 14+
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Gloomhaven® is a registered trademark of Cephalofair Games. Any mention of Gloomhaven® is for reference purposes only. ALL RIGHTS
RESERVED by their respective trademark holders. No challenge to any intellectual property rights is intended or implied by representa-
tions of compatibility and no endorsements of any of our products by any other company is implied or represented.
Created for:
Gloomhaven
Gloomhaven: Forgotten Circles
Scan QR-code and watch component
layout video on Smonex youtube channel.

Tips and tricks Assembly Supplies
To assemble each tray you need a wood
glue for extra strength. (We recommend
Titebond 2 Wood Glue or Beacon 527)
Please make sure you assembled each
tray correctly before gluing it together.
Use stationery knife to cut the bits that
connect details to the frame.
Remove the details from the frame with a
rotational motion along the axis formed by
the bits you just cut.
Use stationery knife to remove all the
remaining connection bits.
You may fix the box with rubber bands
after gluing it. This will save you time and
simplify the assembly.
Use a hairdryer for easier removal of the
protective covering from acrylic details.
Just heat the acrylic surface a little to
remove the covering much easier!
Leave your finished insert overnight to dry
completely.
Wood glue
Stationery knife
Cotton swab
Rubber bands
Hairdryer
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Hammer
IMPORTANT: Assemble each tray one by one. Please DO NOT take out all the parts
from the sheets and mix them. Even though some parts look similar, they are not
interchangeable.
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
If something is damaged or broken, please do not return the whole set.
Contact us directly on email [e-mail] or our website smonex.com.
Any questions or issues with the Smonex products, we’ll do our best to help you.
We want our customers to be completely satisfied.
1

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Map Tile Tray
Summon
Token
Status
Token Tray
Character Tray
Overlay
Tile Tray
Monster Tray
Attack Modifier
Card Holder
Player Boards
Coin Holder
Damage Tray
Objective
Token Tray
Cardholder
Big Overlay Tray
Stand Tray
Monster Stat Tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
2

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Brief assembly instructions:
Components:
1. Unpack and arrange the sheets in order.
2. Compare details on the sheets with details in the
pictures of the guide.
3. Study the pictures of unassembled product.
4. Start your assembly, taking the necessary parts out
of the sheets in a certain order.
1
8 9 10 11 Р1 Р2 Р3 Maps tiles
x8 screws
x4 x4
x4
AB C D E F G H I
2 3 4 5 6 7
Components:
Legend:
19 sheets extrusion molds
5 acrylic sheets extrusion molds (E,F,G,H,I)
8 acrylic lids (A,B,C,D, 4xP3)
6 large parts (for Map tile tray)
8 screws
Assembly guide
1 sandpaper for stripping parts
highlighted details to be extruded
details not used in this assembly
details to be connected without glue
details to be glued
details to be screwed
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
3

19 sheets extrusion molds
5 acrylic sheets extrusion molds (E,F,G,H,I)
8 acrylic lids (A,B,C,D, 4xP3)
6 large parts (for Map tile tray)
8 screws
Assembly guide
1 sandpaper for stripping parts
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Big Overlay Tile Tray
Please DO NOT take all the parts out of the sheets
at once in order not to mix them up.
It will help you not get lost in a lot of components.
Intended for 2-sided overlay tiles storage
(terrain, tables, walls).
1Step 1
Step 2 1
5
5
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
A
1 5
3 4

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Big Overlay Tile Tray
After step 3. Until the glue has completely dried,
make sure the Lid A fits the tray and can be easily
removed. Put it back in its place on the tray. Only
then remove the protective covering.
Step 3
Step 4
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
12A
Intended for 2-sided overlay
tile storage (obstacles, traps,
treasure).
5

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Overlay tile tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Intended for 2-sided overlay
tile storage (obstacles, traps,
treasure).
Please, pay attention, orange detail is different
from the others.
Until the glue has completely dried, make sure the Lid B fits the tray and can be easily removed.
Put it back in its place on the tray. Only then remove the protective covering.
2
B
Step 1 Step 2
Step 3 Step 4
5 6
Please DO NOT take all the parts out of the sheets
at once in order not to mix them up.
It will help you not get lost in a lot of components.

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Monster tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Intended for monster storage.
Step 1
5 C
4
4 5
3
3
7 8
Please DO NOT take all the parts out of the sheets
at once in order not to mix them up.
It will help you not get lost in a lot of components.

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Monster tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 2
3
3
3
4
5
Step 3
Step 4
Red detail is a spare part.
7 8

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Monster tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
4
4
4
5
Step 5
Step 6
Step 7
9 10

This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Monster tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 8
Until the glue has completely dried, make sure the Lid С fits the tray and can be
easily removed. Put it back in its place on the tray. Only then remove the protective
covering.
10

Intended for Summon Token storage.
The detail shouldn’t be glued. Take it out of the tray and put it to the
bottom of it before the game. That make it easier to use tokens.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Summon token tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1
Step 3
Step 2
1 4
11 12

Intended for Status Token storage.
The detail shouldn’t be glued. Take it out of the tray and put it to the
bottom of it before the game. That make it easier to use tokens.
Intended for Attack modifier
cards holder storage.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Status token tray
Attack modifier card holder
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1 Step 2 Step 3
Step 1
Step 2
2 4
5D
11 12

Intended to make it easier to use and store
all the cards. Acrylic details are designed to
separate cards by type.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Cardholder
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1
6
6
E
7
7
F
H
8
8
G
I
Step 2
Step 3
13
Please DO NOT take all the parts
out of the sheets at once in order
not to mix them up.
It will help you not get lost in
a lot of components.

Extrude the acrylic details from the sheets, remove plastic
covering and carefully install them in the cardholder.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Cardholder
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 4
6
E
7
FH
8
GI
Step 5
Step 6
13 14

Intended for money token storage.
Intended for plastic stands storage.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Stand tray
Coin Holder
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1
Step 1
8
9
15

Intended for the storage of scenario aid tokens,
objective tokens and wood element discs.
Intended for damage token storage.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Damage tray
Objective token tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1
Step 1
9
9
15 16

Intended for the storage of monster
stat sleeves and event cards.
Intended for the storage of character
miniature boxes.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Character tray
Monster stat tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 1
Step 1 Step 2
10
10
11
17

Intended for 2-sided map tiles storage.
Carefully apply glue to the inner ends of the
connecting elements along the entire contact line.
Put map tiles in particular order as shown in the picture.
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Map tiles tray
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 2
Step 1
17 18

Intended for comfortable game and saving
results between your games.
First of all remove protective covering from the both
sides of the acrylic part.
Before the final gluing, make sure the lid fits the tray.
In the box you will find screws that need
to be screwed in 2 units into each player board
This is a non-licensed product. ALL RIGHTS RESERVED by their respective trademark holders. No challenge to any intellectual property
rights is intended or implied by representations of compatibility and no endorsements of any of our products by any other company is
implied or represented.
Player board x4
Gloomhaven® Organizer
GNOR01
Compatible with Gloomhaven®
Assembly Guide
Step 2
Step 3
x4
P1 P2
P3
x4
Step 1
x8 screws
19