Snapper Finishing Mower User manual

Parts Manual for
73” FINISHING MOWER
COPYRIGHT © 1998
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 72073 (I.R. 11/4/98)
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND
PRATICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

2
CONTENTS
Page Description/group
3-------------------------------------------------------------- FAMILIARIZATION - 73” FINSHING MOWER
4,5 ----------------------------------------------------------- 73” FINISHING MOWER DECK ASSEMBLY
6,7 ----------------------------------------------------------- CASTER ASSEMBLY
8-------------------------------------------------------------- SPRING LOADED IDLER GROUP
9-------------------------------------------------------------- FIXED IDLER GROUP
10 ------------------------------------------------------------ SPINDLE GROUP
11 ------------------------------------------------------------ DECALS
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

3
FAMILIARIZATION - 73” FINISHING MOWER
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

4
73” FINISHING DECK ASSEMBLY
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

5
73” FINISHING DECK ASSEMBLY
ITEM PART NO. DESCRIPTION
1 4-1901 WELDMENT, 73” Finishing Deck
2 4-1898 WELDMENT, Gearbox Mount
3 4-1897 GEARBOX, 1:1.90 Right Angle
4 4-1896 BELT, 165.5” HB Section
5 4-7245 COVER, Belt
6 4-7139 WELDMENT, 73” Discharge Chute (OFZ)
7 2-7950 SPRING, Chute
8 2-9277 HINGE PIN, Chute
9 9-1313 PIN, 3/32 x 1.0 Cotter
10 --- GROUP, Fixed Idler
11 --- GROUP, Spring-Loaded Idler
12 --- GROUP, Spindle (3)
13 9-1049 WINGNUT, 3/8C NYL Ring (7)
14 4-1902 PULLEY, 12” Split Steel
15 --- GROUP, 9” Caster (4)
16 --- GROUP, 3-Point Hitch
17 4-1893 BAR, Front Hitch (2)
18 4-1894 BAR, Rear Hitch (2)
19 4-1895 LINK, Hitch
20 4-6388 SLEEVE, Hitch Bolt
21 9-1822 BOLT, 1/2 - 13 x 5” Hex Head,
22 --- GROUP, Pivoting Lift Arm (2) (Incl. Items 23 thru 31)
23 4-1914 ARM, Pivoting Hitch
24 4-1913 ARM, Bent Pivoting Hitch
25 4-1904 SLEEVE, 3/4 O.D. x 1/2 I.D. (2)
26 9-1884 SCREW, 1/2 - 13 x 1-1/2 Hex Head Cap (2)
27 9-1922 NUT, 1/2 - 13 Hex Nyloc, Regular (2)
28 5-8035 PIN, Hitch Lift Arm (Incl. Items 29, 30 & 31)
29 4-1903 PIN, Hitch Lift Arm,
30 9-1983 WASHER, 7/8 Slotted,
31 9-1985 NUT, 7/8 - 14 UNF Hex
32 4-6372 DRIVESHAFT, FM7300
33 4-1899 WELDMENT, Caster Tube (2)
34 9-0250 WASHER, 1/2 x 63/64 Flat (2)
35 1-3847 RETAINER, 3/8” Bolt
36 9-1640 BOLT, 3/8 - 16 x 1” Carriage, Grade 5
37 9-1299 NUT, 3/8 - 16 Hex Nyloc
38 4-6427 GUARD, Driveshaft
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

6
CASTER ASSEMBLY
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

7
CASTER ASSEMBLY
ITEM PART NO. DESCRIPTION
1 --- ASSEMBLY, Caster, 73” Finishing Deck
(Incl. 2 thru 11)
2 1-7711 PIN, 6/16” Lynch
3 1-9152 SPACER, Caster (6)
4 2-1960 SPACER, 1 x 1-3/8 PM
5 2-2151 SPACER, Axle Sleeve
6 2-3556 BUSHING, Caster (2)
7 2-3747 BUSHNG, 1” Machine
8 5-7762 ASSEMBLY, Wheel/Tire 9 x 3.50-4
9 4-6523 YOKE, Caster (Weldment)
10 9-1326 SCREW, 1/2 - 13 x 5-1/2” Hex Head Cap
11 9-1922 NUT, 1/2 - 13 Nyloc, Light
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

8
SPRING-LOADED IDLER GROUP
ITEM PART NO. DESCRIPTION
1 --- ASSEMBLY, Spring-Loaded Idler Group
(Incl. Items 1 thru 18)
2 --- ASSEMBLY, Idler Arm (Incl. Items 3 thru 14)
3 4-2619 ARM, Idler (Weldment)
4 2-3556 BUSHING (2)
5 7-6998 FITTING, Lube 1/4 - 28 Straight
6 3-2031 WASHER, 1/32 I.D. x 1-1/4 O.D. Flat
7 1-2709 E-RING, 1”
8 3-5789 PULLEY, Idler 5-1/2” O.D.
9 9-1305 SCREW, 3/8 - 16 x 2” Hex Head Cap, Grade 5 (2)
10 9-1300 WASHER, 3/8” Flat
11 9-1299 NUT, 3/8 - 16 Hex Nyloc (6)
12 9-1553 SCREW, 3/8 - 16 x 1-3/4” Hex Head Cap, Grade 5
13 9-1331 WASHER, 13/32 x 1-1/2 Yellow Zinc (2)
14 3-5858 SPACER, 1/2” I.D. x 3/4” O.D
15 3-5667 SPRING, Extension
16 4-1295 PIVOT, Idler (Weldment)
17 9-1619 NUT, 3/8 - 16 Hex Flange Lock
18 9-1640 BOLT, 3/8 - 16 x 1” Carriage (3)
19 1-3847 RETAINER, 3/8” Bolt
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

9
FIXED IDLER GROUP
ITEM PART NO. DESCRIPTION
1 --- ASSEMBLY, Fixed Idler Group
2 3-5789 PULLEY, 5-1/2” O.D. Idler
3 3-6449 STAND, Fixed Idler
4 9-1299 NUT, 3/8 - 16 Hex Nyloc (4)
5 9-1300 WASHER, 7/16” x 1” Flat
6 9-1305 SCREW, 3/8 - 16 x 2” Hex Head Cap
7 9-1640 BOLT, 3/8 - 16 x 1” Rounded Head Square Neck (3)
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER

10
SPINDLE GROUP
ITEM PART NO. DESCRIPTION
1 9-1736 NUT, 5/8 - 18 Hex Flange Lock, Grade 5
2 2-9270 WASHER, Spindle
3 2-9249 PULLEY, 5-3/4” O.D.
4 2-9274 SNAP RING, Spindle Shaft
5 2-9422 BEARING, Sealed (2)
6 2-9302 BOLT, 3/8 - 16 x 1-1/4” Rib Necked (6)
7 5-4017 HOUSING, Cutter (Incl. Items 6, 7 & 10)
8 9-1299 NUT, 3/8 - 16 Hex Nyloc (6)
9 2-9275 FITTING, Lube
10 2-9384 VENT, Spindle
11 2-9254 SPACER, Bearing
12 2-9253 SHAFT,Spindle
13 2-9271 SPACER, Blade (4)
14 4-6625 BLADE, 25 Inch
15 1-6440 WASHER, Beveled
16 2-9256 BOLT, 5/8 - 7-1/2” Hex Head Cap, Grade 5
-- 5-4011 ASSEMBLY, Spindle (Incl. Items 4, 5, 7, 9, 11 & 12)
MANUAL No. 72073 (I.R. 10/7/98) 73” FINISHING MOWER