Snapper NR20500 User manual

Parts Manual fo
r
Revision 1,
20" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
COPYRIGHT
©
2005
McDonough, GA, 30253 U.S.A.
TP 400-5104-1-WB-N
9/22/2005 Manual No. 7006055
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
WALK BEHIND MOWERS
PUSH MODELS PROPELLED
MODELS
NR20500 NRP20500
R20500 RP20500

Table Of Content
s
TP 400-5104-1-WB-N
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0 3
PAGE GROUP
4Handles & Controls (Push Models)
6Handles & Controls (Self-Propelled Models)
8Engine, Cutting Deck, Blade, Interlock (Push Models)
10 Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
12 Wheels, Guards, Axle, Transmission
16 Side Chute, Adapter
18 Decals

Handles & Controls (Push Models)
TP 400-5104-1-WB-N
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
4

Handles & Controls (Push Models)
Footnotes:
TP 400-5104-1-WB-N
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0 5
Part No Descri
p
tionItem Qt
y
Note
1 7074384 1 HANDLE, Upper Was 33473
2 7036350 1 HANDLE, Middle
3 7046502 1 HANDLE, Lower (Left Hand) Was 38467
4 7035342 1 HANDLE, Lower (Right Hand) Was 38466
5 7017072 1 CONTROL, Blade
6 7033904 1 CLIP, Blade Control
7 7023765 1 CABLE, Blade Control
8 7014343 2 BUSHING
9 7023813 1 CLIP, Wiring Harness
10 7028481 1 CONTROL, Throttle
11 7090095 1 NUT, 1/4-28 Hex Was 91024
12 7090391 1 WASHER, 5/16 Internal Tooth Lock Was 91068
13 7023735 4 KNOB, 5/16-18 Thread
14 7091740 4 SCREW, 5/16-18 x 2" Curved Head Was 91189
15 7024211 1 DECAL, Blade Control
16 7090053 1 WASHER, 1/4 Internal Tooth Lock Was 91023
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026
18 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 91070
19 7090112 1 SCREW, 1/4-28 x 2" Hex Head Cap

Handles & Controls (Self-Propelled Models)
TP 400-5104-1-WB-N
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
6

Handles & Controls (Self-Propelled Models)
Footnotes:
TP 400-5104-1-WB-N
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0 7
Part No Descri
p
tionItem Qt
y
Note
1 7074384 1 HANDLE, Upper Was 34688
2 7024211 1 DECAL, Blade Control
3 7017072 1 CONTROL, Blade
4 7023792 1 PIN, .250 Dia. x 1 1/2"
5 7014307 1 GRIP, Wheel Drive
6 7041728 1 HANDLE, Wheel Drive
7 7014343 4 BUSHING
8 7033904 1 CLIP, Blade Control
9 7090112 2 SCREW, 1/4-28 x 2" Hex Head Cap, Grade 5
10 7091020 1 NUT, 1/4 Push
11 7029699 1 CONTROL, Throttle
12 7090053 2 WASHER, 1/4 Internal Tooth Lock Was 91023
13 7090095 2 NUT, 1/4-28 Hex Was 91024
14 7029631 1 CABLE, Wheel Drive
15 7016544 2 PLUG
16 7091601 1 NUT, 5/16-18 Hex Flange Lock Was 91070
17 7091190 3 SCREW, 5/16-18 x 1 1/2" Short Neck Curved Head
18 7029697 1 CABLE, Blade Control
19 7023813 3 CLIP, Wiring Harness
20 7029621 2 HANDLE, Middle
21 7091533 1 SCREW, 5/16-18 x 1 3/4" Short Neck Curved Head
22 7034620 1 BRACE, Handle/Bracket
23 7034330 1 BRACKET, Handle/Wheel (Right Hand)
24 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head, Torx
25 7034361 1 BRACKET, Handle/Wheel (Left Hand)
26 7090951 3 NUT, 5/16-18 Large Flange Lock
27 7091673 1 WASHER, Flat, .125 x .252 I.D. x .625 O.D.

Engine, Cutting Deck, Blade, Interlock (Push Models)
TP 400-5104-1-WB-N
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
8

Engine, Cutting Deck, Blade, Interlock (Push Models)
Footnotes:
TP 400-5104-1-WB-N
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0 9
Part No Descri
p
tionItem Qt
y
Note
1 -- *ENGINE, 5 HP Brigg's & Stratton XM, Model 12F802-0848-01
2 7026879 1 WIRE, Ground
3 7028430 1 RING, Engine Mount (For Push Models)
4 7091584 2 NUT, 1/4-20 Hex Flange Lock Was 91065
5 7090379 1 SCREW, #8-18 x 3/4" Hex Washer Head
6 7090385 1 WASHER, #8 Tab Internal Tooth Lock
7 7012048 1 INSULATOR
8 7034404 1 SPRING, Interlock, (Short) (Serial No's. 55609619 & Up)
7033408 1 SPRING, Interlock (Long) (Serial No's. 55600001 to
55609618)
9 7011791 2 RETAINER, 5/16 Bolt
10 7091508 2 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001
11 7090071 2 SCREW, 1/4-20 Hex Head Cap, Grade 5
12 7091088 3 SCREW, 3/8-16 x 2" Hex Washer Head, Self-Tapping
13 7053822 1 DECK, 20" Cutting (Includes items 14 & 15)
14 7024379 1 DECAL - WARNING
15 7013010 1 DECAL - DANGER (Keep Hands & Feet Away)
16 7034362 2 BRACKET, Front Wheels
17 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head Torx, Self-Tapping
18 7090913 1 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
19 7034363 1 PLATE, Deck Front
20 7029659 1 DECAL, "Whipper" SNAPPER
21 7090167 1 SCREW, 3/8-24 x 2" Hex Head Cap, Grade 5
22 7012063 2 WASHER, Cone
23 7017167 1 BLADE, Mulching
24 7026189 1 HUB, Blade
25 7010783 1 KEY, #505 HI-PRO
26 7034418 1 BRACKET, Rear Wheel (Right Side Shown)
7034419 1 BRACKET, Rear Wheel (Left Side - Not Shown)
Purchase Engine & Engine parts, other than those listed, from engine service outlets.

Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
TP 400-5104-1-WB-N
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
10