SnappyTags SnappyTag User manual
www.snappytags.co.uk
Fast Delivery Bleach Proof Industrial Wash
Safe
Easy to attach, no sew, no
ironing required, just clip on
using our crocodile applicator!
Reusable tags which can be
used over and over again, just
repurchase the backs.
Call or look on our website for our full range of products
Guaranteed not to come o
in the wash!
Room
95
A simple naming solution, that takes the hassle out of labelling
clothes. We provide our SnappyTag solution to many care homes,
schools and nurseries around the UK.
R
Easy to attach, no sew, no
ironing required, just clip on
using our crocodile applicator!
Reusable tags which can be
used over and over again, just
repurchase the backs.
Charlie
Gray
How to Guide:
Find the care label, diagrams below show the common locations.
Feed the pointed end of the SnappyTag
back strip through the guides on the bottom
of the applicator until one of the backs is in
position nested within the gap.
Turn over the applicator and press in
one of your personalised SnappyTags into
place making sure it is securely seated.
Take your garment and place the care label
between the jaws of the applicator and close
the applicator firmly, a click will be heard.
Need to Remove?
www.snappytags.co.uk
Need to reorder? Give us a call or visit our website!
Simply remove the SnappyTag using the applicator removal section (on the handle of
the applicator.) Place the SnappyTag personalised part into the hole and move along the
slide, this will separate the two parts of the SnappyTag. You can then reuse the personalised
SnappyTag but the SnappyBack will no longer hold securely.
To order additional SnappyBacks please visit our website.
Step 1:
Step 2:
Step 3:
Table of contents
