Snow Peak GS-450R User manual

GS-450/manual/date2018.5.1
Instruction Manual Ver 1.00
Contents Include/ Name of the parts
Specifications
Could easily result in a serious accident or death.
GS-450R
Flat Burner
Outdoor Use Only
This product is for outdoor use only. Never use it inside of a building, tents or veicles. It may cause
death or serious poisoning due to oxygen deficiency or toxic gases. Please use this product in
a well ventilated space even outdoors. The stove is very hot during and after use, please use hand
protection to avoid burns. Keep this product out of reach of children to avoid danger.
Thank you very much for purchasing this Snow Peak product. This is a separable detatchable
canister stove for outdoor use only. Before using this product, be sure to read these instructions
carefully and use the product correctly and safely. After reading these instructions, keep this
manual in a safe place for future reference. Although this product is expected to be complete and
safe, please check all accessory items and practice assembling and handling it in a safe location
prior to use in the field.If you find anything in the instruction manual that is difficult to understand,
or if you find a defect in a product, stop use immediately and please contact to the dealers where
you purchased the product or Snow Peak Customer Service.
Read carefully and avoidtheaccidentsthatarepostedbyusingtheunitssafely.Anoteonthewarningsandprecautionsinthis
manual.
All combustion appliances created by Snow
Peak are required to pass thorough burning
tests before shipment. Therefore,
please understand that there may be a slight
tarnish on the top plate or the burner head.
support and burner head.
GS-450R
270 X 410 X110 mm ( Exc. Hose and A-hose,Flame control valve）
1.9kg (Exc. Carrying Case)
250ｇ/ｈ
3,000kcal/h
●Gas consumption and heat output is measured and calculated in accordance with In-house testing methods.
●Use the Snow Peak gas canister as shown on the above table.
GP-500GR,GP-500SR,GP-250GR,GP-250SR
MADE IN KOREA
Flat Burner
《Contents include》
Product Name
Model
External Dimensions
Weight
Heat Output
Compatible Fuel Ccanisters
Country of Origin
Gas Consumption
Main Unit Flame Control Valve Holder Carrying Case binding band Instruction Manual
①Burner Body ②Top Plate
Fuel Canisters(Not Included)
③Pot supporter ④Legs
《Unit Details》
Burner Head
Hose
Windshield
Flame Control Valve
Appliance Valve Knob
Joint Parts
Ignite button
Joint Holes
Ignite Unit
O Ring
Fuel Canister Joint part
Flame Control
Valve Details
-Up to 23cm/5 Liter
-No Dutch Ovens
1 2
For Your Safety
DANGER
WARNING
CAUTION
Warning. Misuse could result in serious injury or death to the user.
Caution. Misuse could result in injury or damage to property.
Usable Pots
ThisisalowresolutionPDFforconfirmation.
PleaseprinttheAIfile.
確認用の低解像度PDFです、
AIデータが入稿用データとなります。

1m (3.3 ft)
30cm ( 1 ft)
Heat-inslating
Material
Other brands
GS-450 / manual / date 2018.5.1
Danger
Never attempt to repair or modify on your own
■ Reason ■This product and fuel canisters are precision manufactured. Modification may
result in poor performance or give rise to imcomplete combustion or gas leakage. Please contact
the retailer where you purchased the product or Snow Peak customer service if repairs are needed.
■ Reason ■Snow Peak fuel canisters are not designed to be refilled. Never refill the canisters.
Do not refill the fuel canister.
■ Reason ■Make sure the flame control valve is completely shut before attaching the fuel canister. After attaching, make
sure that there is no gas leakage. If lit when there is gas leaking, there is a chance of burns from abnormal combustion or toxic
symproms. If you feel sick, stop using this product immediately and contact the dealer where you purchased the product or Snow
Peak Customer Service. Do not ignite with gas leaking.
Before lgniting the stove, inspect to see there is any gas leakage.
■ Reason ■You may die from lack of oxygen if you intentionally inhale gas. Never inhale gas
from the canister.
Do not intentionally inhale gas from the fuel canister.
This product is designed for outdoor use only. It consumes large amount of oxygen while it’s used, its use in enclosed spaces
may lead to oxygen deficiency, carbon monooxide poisoning or fire.
This product is for outdoor use only. Never use it inside of buildings,tents or vehicles. It may cause death or serious poison-
ing due to oxygen deficiency or toxic gasses.
Do not use this product inside of car or building
Read the notes below carefully to use Snow Peak Gas products safely.
■Reason■Other fuel canisters differ in standards such as
valve configuration and nozzle thickness. This basic design
difference may result in gas leakage and could lead to
combustion, fire, or abnormal burning from burner.
■ Reason ■Fuel canisters are
filled to the top with liquid gas. If the
canister is attached at an angle, the
liquid gas may gush out in large quanti-
ties, causing great danger. Make sure
there is no source of fire in the
surrounding area, and then mount the
fuel canister in an upright position. The
connection screw to the fuel canister is
very important part. Gas may leak if it is
not screwed on straight.
When attaching and removing fuel canister, make sure
to have fuel canister in an upright position.
SnowPeakFuelCanisters
GP-500GR/
GP-250GR
(GOLD)
GP-500SR/G
P-250SR
(SILVER)
■ Reason■
The flame control
valve may come open while its stored
or being transported.
Before mounting the gas canister, make sure to turn the
flame control valve clockwise until completely shut.
Warning
Warning
■ Reason ■ The O-ring suffers
wear and tear when mounting and
detaching fuel canisters. Even a
non-rubber O-ring will deteriorate with
time. Use of a deteriorate or damaged
O-ring may cause leakage of gas.
■ Reason ■The heat of the flame
flows sideways and /or downward, depend-
ing on the direction of the wind. Since the heat
of the flame is transmitted upwards with great
intensity, keep combustible items at a sufficient
distance to avoid catching on fire. Also, since
the heat radiating from the pot also rises the
temperature of the surface underneath the
stove, giving rise to the danger of catching fire,
always spread heat-insulating material
underneath the stove when it is in use.
Never put the fuel canister on the stove
Never, under any circumstance, use the stove to
light charcoal
Never use the stove for any purpose
other than cooking.
Always use stove on level, stable surface
■ Reason ■ By using iron plates,
grill net, ceramic products, smokers, etc.
the fuel canister unexpectedly heats up
due to radiant heat, resulting in a risk that
the internal pressure of the fuel canister
will rise rapidly and explode.
Do not use steel plate, grill net, ceramic products
or smoking product.
■ Reason ■Wind and airflow may
increase the size of the stove's flame,
potentially causing burns or a fire.
Do not tilt, shake or carry with the flame
on.
■ Reason ■A small amount of gas
remains even the fuel canister is
completely empty, so if they are thrown
into a fire or discarded near other heat
sources, they may explode as their
internal pressure rises.
Never throw an empty fuel canister into a fire or discard
it near any heat sources.
34
Please use this stove with only Snow Peak designated
fuel canisters. Snow Peak fuel canisters are adjusted
for maximum and appropriate with Snow Peak products.
Please do not use any other type of fuel canister. Snow
Peak has designed specific fuel canister models for use
with this stove, so please refer to the Designated Fuel
Canister list on the back of this page.
Before each use of stove, check to make sure that the
threaded sections of the valve as well as O-ring are
in normal condition and undamaged. If there is any sign
of under wear or damage, contact with the dealer or
Snow Peak Customer Service.
Keep combustable items no less than
3.3 feet above the stove and 1 feet around. Also, please
use the stove with heat -insulating material spread und-
erneath it.
Reason If the stove is used on an
inclined or unstable surface, it may tip
over, potentially causing damage or
injury.
Always stand fuel canister when use the stove
Reason If you set the fuel canister
in vertical or upside down position, it will
jet out liquid gas and may cause a large
flame, leading to a fire, injury or accident.
Reason Even after the flame is
extinguished the pot supporter may still
be hot and it may cause an explosion of
the fuel canister.
Do not force the fuel hose to bend. Unwind the fuel
hose, making certain there no twists or kinks,
and keep it away from to the stove.
Reason It may cause a gas leakage
and it would lead to inflamation and fire or
Abnormal combustion.
Do not use or store this product and the fuel canister
on beach, pebbles by river, metal surfaces or road
where the heat is over 40℃.
■ Reason ■Beaches,pebbles by river,metal surfac-
es or road where gets direct sun would be hotter than
outdoor temperature. If you leave the fuel canister or use
the stove in such places, the internal pressure of the fuel
canister goes up rapidly and it leads to abnormal
combustion.
Reason Using the stove to light charcoal
will subject the stove itself, as well as fuel hose
and fuel canister to abnormal heat.This is extr-
emely dangerous so do not use it in this
manner under any circumstances.
Reason Use for purposes such as
heating or drying clothes may lead to such
unexpected accidents as fire, burns, and
oxygen deficiency.
ThisisalowresolutionPDFforconfirmation.
PleaseprinttheAIfile.
確認用の低解像度PDFです、
AIデータが入稿用データとなります。

GS-450/manual/date2018.5.1
Instructions for Use
Make sure that the main unit is completely cooled down
before storing it.
Fuel canisters should not be carried on an aircraft.
■ Reason ■Inspect fuel canister before use, and
do not use the product if there are any abnormalities
such as scratches, dents, or rust, as there is a risk of gas
leakage. Also, please check it sometimes during storage.
Inspect and clean fuel canisters from time to
time.
Do not drop this product. Stop use immediately if
the product is dropped or jolted.
Warning
１．Make sure the flame control valve
knob is shut.
２．Connect the canister joint with the
fuel canister connection up.
3．Set the pot supporter on the top plate.2．Attach the burner body to the top
plate.
１．Insert the legs into the holes of the
both sides’ of the top plate.
Take out the flame control valve and the hose of the
burner body from the short side of the top plate. It
can not be attached to the long side.
Please be careful not to boil over when using
this product. Due to the structure of the wind-
shield, splitting right under the top plate may
lead to an unexpected accident.
Do not use with the burner body only (parts only).
During using this product, the top plate and the pot
supporter become very hot. Please be careful not to
touch directly.
The space between the bottom of the body and the
bottom becomes hot. Please be careful as there is a
risk of accidental burns.
Assembly Method
How to set up the fuel canister
Install the fuel canister in the upright
position (connection is ontop).
Straighten the hose and keep the main unit and the
fuel canister as separate as much as possible.
When installing or removing the fuel canister, a small
amount of gas may leak. Do not install or remove the
product in places near fire or with in poor ventila-
tion, as it may be flammable and very dangerous.
Close
(Clock-wise) (Anti-clockwise)
56
Warning
Reason Fuel canister are prohibited from being
carried on aircrafts by law.
After using the product, make sure to inspect
and clean the stove before storing.
■Reason ■Any dirt or debris could
cause clogging or rusting,raising the
potential for danger or accidents. Ensure
such problems do not occur for the next
time you use it.
Keep both the stove and fuel
canisters out of reach of children
Reason Keep stove and fuel canisters out
of reach of children to avoid danger.
Before disposing fuel canisters make sure it is completely
empty and dispose it separately from other trash to avo-
id the danger of explosion. If the stove is not to be used
for long period of time, detach the fuel canister. Store
the stove in the included case and the fuel canister with
its cap securely in place.
■Reason ■The flame control valve may open
accidentlly and cause gas leakage. Grime or
dust in the parts where the stove and fuel
canister connect may cause a malfunction in
the stoves funtionality.
Never use the stove near other heat sources such as
heaters or open fires.
Reason Heat generated from heater
or open fire wil increase the temperature,
causing the fuel canister to become too
hot, potentially leading to an explosion.
Do not use multiple stoves side by side with a single
cooking unit.
Reason If multiple stoves are used
with large pots or single plate grill, the fuel
canisters will be subjected to abnormal heat
levels from each other’ s flames, giving rise to
the danger of explosion due to the rising
internal pressure of the fuel canister.
Never surround the stove with a windshield or use
stones or other devices to increase the span of the
pot support.
Reason ■The use of wind screen or
stones will cause the heat to buid up in the
area around the fuel canister, cause it to
absorb an abnormal amount of heat. Placing a
pot on top of the stove burner acts like a rod,
further increasing heat built-up. This will cause
temperatures to rise to extremely high levels,
leading to danger of explosion.
■
■Reason ■If the main unit is stored with heat, the carrying
case may get melted, or heat may transferred to the fuel canister
and explode. Please make sure the unit is completely cooled down
before storing.
■Reason ■Even if the product does not
look damaged, the internal mechanism may be
broken. Please ask a dealer or Snow Peak
Customer service for inspection.
Warning while using this product
●Do not use the product with a gas leakage, after it had a shock,
with any abnormalities.
●Before using it, make sure there is no dirt or dust on the flame
control valve. Keep it clean at all times and do not leave it on the
ground. If dust or dirt attaches to it, it may reduce the output pow-
er and cause problems such as no gas being emitted.
●The gas pressure changes with the air temperature or the tempe-
rature of the fuel canister, and the state of combustion (such
as the condition and power of the flame) changes.
●The flame may go out or boil over due to strong wind. Please keep
an eye on it while using it.
●If abnormal combustion occurs, extinguish immediately and stop
using the product.
●The metal near and in contact with the flame will become burnt
and discolored overtime.
●Never ignite if you smell gas. Extinguish all fires and flames and
detach the fuel cainster.
Warning about burner body / windshield
●The windshield surface is coated with enamel. In the manufactu-
ring process, some parts, such as the edges, are difficult to cover
and rust may occur if those parts are in contact
with water or or liquid for a long time.
●When a strong shock is applied, the enamel surface may crack or
the edge parts may get chipped.
●When cleaning the product, do not use metal brushes or
abrasive scrubbers.
Warning
Warning
Warning
Use Snow Peak Designated Canisters only
(GP-500GR, P-500SR, GP-250GR, GP-250SR).
Please do not use other canisters.
Squeeze the fuel canister tightly in the stopper.
A loose clamp can cause gas leakage.
Make sure it is
tightened
Keep them away
ThisisalowresolutionPDFforconfirmation.
PleaseprinttheAIfile.
確認用の低解像度PDFです、
AIデータが入稿用データとなります。

Flame Control
Valve knob
Igniter
GS-450/manual/date2018.5.1
Warranty
Maintenance
How to remove the fuel canister
With the fuel canister is standing position, turn it clockwise to detatch the fuel canister. Be sure to attach and store
a cap on the removed fuel canister.
If the gas can not be ignited for more than 2 seconds, stop using the
igniter and ventilate until the gas odor disappears. If ignition is not
successful, ignite with a long tip lighter as shown on the picture on
the right.
Turn off
(Clockwise)
Pot Supporter Burner Plate
MADE IN KOREA
78
1.Igniting the stove
Turn the flame control valve knob slowly in the counter-clockwise direction (left rotation) as
seen from the front, and after a small amount of gas is ejected, press the igniter several
times. If you can not ignite it, please close the flame control valve knob and try again.
Warning
Warning
When igniting, make sure there are no flammable materials around. Also, do
not place your hand or body near the top of the burner or look into the burn-
er. There is a risk that a large flame will burn and cause burns.
The igniter may not be able to ignite due to weather or elevation. Be sure to
prepare a lighter with a long tip as a backup.
Open Close
A log tip lighter
2.Flame adjustment
When the flame control valve knob is turned in the counter-clockwise direction (left turn), the
heating power becomes large, and when it is turned clockwise, it becomes smaller.
Please turn the flame control valve knob slowly.
3.How to extinguish
Turn the flame control valve knob slowly in the clockwise direction (right turn) until
the flame goes out. Ensure the flame is completely extinguished. Turn on
(Counter-clockwise)
Operation
How to store the stove
In the reverse procedure of "Assembly method", remove the top plate, the burner body and the legs from the top pla-
te and stack them as shown in the figure below.
Legs
Secure the stacked parts using the binding band and place in the carrying case.
Warning The product becomes very hot after use. Make sure it has completely cooled down before storing it.
Snow Peak guarantees its product against manufacturer defects. In the rare case you feel this product a
defect or needs repair, please contact your retailer purchased the product or contact Snow Peak custom-
er service. We will repair or replace the product free of charge if the product was defective. In other cases,
we will repair at an appropriate fee. The decision of repair and replacement is at our discretion.
In addition, please note that repair may not be possible in the following cases.
1. If you did not follow this instruction manual.
2. Product life due to wear and tear by user.
3. Damage by altering or careless handling.
4. Products failure due to user accidents.
5. Any damage except with product defect
due to manufacturing.
6. Damage by dirt and rust.
7. Damage or failure by dismantling.
8. Deformation and failure of parts damaged by dropping
or other similar incidents.
9. Product failure due to wear and tear by user.
10. Damage caused by improper use with other products.
<Burner body>
・Donotwashtheburnerbodywithwater.
If dirt or salt adheres, wipe it off with a wet cloth.
・
After wiping off dirt, wipe off the water with a dry
cloth and dry thoroughly in a well-ventilated shady
place.
<Topplate, Pot Supporter & Legs>
・wash them with a soft sponge with a washing
up liquid.
・
After washing them wipe off the water with a
dry cloth and leave them in a well-ventilated
shady place to dry throghly.
Trouble Shooting
How to identify failure and address abnormalities.
Sympton Cause Solution
Gas leakage/smell
Stove does not ignite/
Flame is uneven
Low heat output
Flame extinguishes
during operation
Flame does not extinguish
Red flame
Auto iginiter does not
spark
Discoloration of Hot plate &
Burner head
- Improper mounting of fuel canister.
- Fuel canister is attached at angle.
- The fuel canister joint O-ring is damaged.
- Gas is leaking from other than fuel canister
connection parts.
- Make sure the fuel canister is attched correctly
as instructed in this manual.
- Stop using the stove immediately.
- Clogged burner head. - Clean the burner head and remove the clogging.
- Low fuel level in fuel canister.
- Fuel canister goes cold. - Replace the fuel canister.
- Low fuel level in fuel canister.
- Clogged burner head.
- Replace the fuel canister.
- Clean the burner head and remove the clogging.
- Flame controle valve is not closed completely. - Turn the flame control valve off completely.
- Red flame appears around auto igniter.
- Water or food boiled over is remaining on
burner head.
- Red flame only appears around hot plate.
- The red flame around auto igniter is a flame reaction by
material of auto igniter.
- Clean the burner head to remove the clogging.
- The red flame around hot plate is a flame reaction by
material of hot plate.
- Low fuel level in fuel canister.
- Clogged burner head.
- Fuel canister is not attached properly.
- Replace the fuel canister.
- Clean the burner head and remove the clogging.
- Read ‘Operation’ section in this manual and attach
the fuel canister properly.
- Discolorations is caused by combustion and this is not
a malfunction.
When these solution do not work.... Stop using the product immediately and contact the dealer you purchased the product, or contact
Snow Peak Customer Service.
Snow Peak London, Limited
16A REGENT STREET ST JAMES’ S
LONDON SW1Y 4PH UK
TEL:[phone]
(Customer Service Tel)
404 NW 23rd Ave., Portland Oregon, 97210, USA
Instagram: @snowpeakusa
Snow Peak USA Inc.
ThisisalowresolutionPDFforconfirmation.
PleaseprinttheAIfile.
確認用の低解像度PDFです、
AIデータが入稿用データとなります。