SoftGuards MLE09065 User manual

Material Composition
Size chart KAO CHEN ENTERPRISE CO., LTD.
NO.68, LANE326, SANGANG RD., LONGJING,
TAICHUNG 43444, TAIWAN
Tel : [phone] Fax : [phone]
www.softguards.com
E-mail : [email protected]
Universal 5’’ ~ 9 ’’ 13~23 cm MLE09065
Wrist / Palm Support with Thumb Splint
60% Nylon
15% Aluminum
13% Polyester
8% PU foam
4% PP
1. Breathable fabric for more comfort.
2. Hook-side fastener for easy adjustment.
3. Shapeable aluminum alloy stays stabilize palm.
4. Suitable for both left & right hands.
5. Plug-in thumb splint for extra support.

Instruction
Caution
Washing instructions
Product views
1. The product should be used under the
supervision of a medical professional.
2. Over tightening of strap may compromise blood
circulation.
3. If discomfort or pain results and persists, please
discontinue wearing and consult with medical
professional.
4. Make sure the fasteners are well fastened while
wearing the brace. If the fasteners can not be
fastened well, please stop using the brace to
prevent injuries.
5. If product is in poor condition, please do not
use it.
1. Loosen all straps, insert thumb splint into lateral
side of brace. Ensure thumb splint in correct
position (for left or right).
Left
hand
Right
hand 1
4
5
2
3
3. a. Wrap straps #1 & #2 to proper tightness and
then attach hook-side fastener onto the
straps.
b. Have strap #3 & #4 to wrap tight and attach
the hook-side fastener to strap.
c. Adjust #5 strap to suitable tightness and then
attach to hook-side fastener.
d. Double check the overall tightness before cut
off the excess part of #5 strap for proper
length.
2. Slide palm & thumb into the brace with the
splint positioned along the palm & thumb.
Opisthenar Palm
Opisthenar Palm
1. Separate the aluminum stay from the brace
before washing.
2. Hand wash with mild detergent.
3. Rinse thoroughly and air dry.
4. Avoid direct exposure to sunlight.