Solt GGSBC43B User manual

Tips for Using & Operating Your Beverage Chiller
Model: GGSBC43B
43L Beverage Chiller
Quick Start Guide
V 1.0 | 0821

43L Beverage Chiller
Getting Started...
For more information please call 1300 11 43 57 WWW.SOLT.HOUSE | ESSENTIALS FOR LIFE
After you switch on your beverage chiller for the
first time, you can use the Temperate Control knob
(Image below) located in the rear of your beverage
chiller, to set your preferred temperature.
The temperature options are as follows;
• “Cold” is the warmest setting (approx. 10 ºC)
• “Normal” is the typical setting (approx. 5-6 ºC)
• “Colder” is the coldest setting (approx. 1 ºC).
MODEL
GGSBC43B
Before First Use
Before turning on your beverage chiller for the first time:
• The beverage chiller must be rested for at least 6 hours in its location, before connecting to
power and switching on.
• Clean the inner chamber and leave the door open during this 6-hour resting period to allow any
residual odours to clear.
• Do not connect beverage chiller to electronic energy saving plug or converter that can convert
DC into AC (E.g.: solar energy system. ship grid).
Operation Instructions
Your beverage chiller is supplied with the door
hinged to the right hand side. If you would like to
reverse the hinging of your Beverage Chiller door
(i.e. hinge it on the left hand side), please follow the
steps on Pages 12 & 13 of your User Manual.
Reversing the Door
The appliance should be placed in the coolest area
of the room, away from heat producing appliances
or heating ducts. A suitable insulation board shall
be applied if necessary.
Please avoid placement in direct sunlight.
Try to shorten opening time of cooler’s door. Regular
opening of your Beverage Chiller door may lead to
condensation on the glass door, particularly if the
external air is humid. This is completely normal with
all beverage chillers.
Energy Saving Tips