Sonance Extreme XSSTR Manual

2-Way, 6.5” Speakers with Unprecedented Temperature, Humidity and Shock Resistance:
• Ideal for outdoor, marine, spa, showers or steam-room applications
• Available in Rectangle, Round and Single Stereo Round Models
• Ideal for situations requiring Symphony-level sonic performance in highly adverse
environmental conditions
Special Materials and Unique Construction Enables Symphony Extreme to Perform
Indefinitely Under Severe Conditions:
• Using a combination of advanced polymers and anti-corrosion technologies, Extreme models can
withstand ambient temperatures from –30 to +220 degrees F (-34 to 104 degrees C), long term
exposure to UV radiation, steam etc.
• Black anodized, 6.5 inch (165mm) aluminum cone woofer paired with a 1 inch (25mm)
polyurethane dome tweeter deliver great sound and a long service life
• Proprietary polymer baffle materials, powder-coated stainless steel grilles and special hardware were
carefully chosen for their extreme weather-resistant properties
• Highly-durable O-ring gasket between the frame and baffle along with a neoprene gasket between
the frame and mounting surface provide watertight seals
• To survive the physical abuse typical of boats and other watercraft, all crossover components are
tie-wrapped down to the crossover PCB for excellent shock resistance
Shallow Depth Permits Installation in More Applications, Such as Urban Residential,
Marine and Aviation:
• Extreme XT in-wall speaker is only 2-1/2” (63.5mm) deep and easily fits in a 2’ x 4’ wall and
ultra-shallow cavities, such as in boats
• Extreme XTR in-ceiling speaker is only 3-5/8” (92mm) deep and will also fit in 2’ x 4’ walls and
other shallow cavities
• Extreme XSSTR, Single Stereo Technology Round in-ceiling speaker is 5-3/16” (132mm) deep and
was designed for standard ceiling applications
A Pathway to Installations
SONANCE SYMPHONY®EXTREME XT, XTR & XSSTR
The Industry’s First, High Performance, Weatherproof, In-Wall/In-Ceiling
Speakers Specifically Designed For Extreme Environments

SYMPHONY EXTREME APPLICATIONS
Ease of Design and Installation:
• Sonance Extreme technology allows the speakers to withstand long-term direct exposure to
saltwater, sunlight, heat and other harsh elements
• The combination of the neoprene baffle seal, compressible silicone rubber o-ring frame seal and
water-impermeable driver assemblies prevents moisture from getting behind the speaker
and causing damage
Extreme Speakers are ideal for the sauna...

• Install in the shower, or in other high humidity conditions
• Appropriate for indoor or outdoor applications
SYMPHONY EXTREME APPLICATIONS
• Extreme XT’s at only 2-1/2 inches deep, are perfect for yachts or other watercraft with
limited depth mounting surfaces
• Motor homes and trailers with their thin wall construction are also a great spot for the XT’s

212 Avenida Fabricante • San Clemente • CA • 92672-7531 • Tech Support [phone] E-mail [email protected]
www.sonance.com © 2003 Sonance. All rights reserved. 2.03
Specifications for the XT:
• Woofer: 6-1/2” (165mm) one-piece, black anodized aluminum cone with a
rubber surround
• Tweeter: 1” (25mm) polyurethane dome
• Frequency Response: 55Hz - 20kHz + 3dB
• SPL: 89 dB 1w/1m
• Power Handling: 5 watts min. - 60 watts max.
• Impedance: 8 ohms nominal - 6 ohms minimum
• Grilles: Powder-coated stainless steel
• Speaker Dimensions (W x H x D): 8-1/8” x 12-3/16” x 2-1/2” (206mm x
310mm x 63.5mm)
• Cutout Dimensions (W x H): 6-3/4” x 10-7/8” (171mm x 276mm)
• Weight: 3-1/2 lbs (1.3kg) per unit
Consider these other Sonance Products for your Symphony Extreme Installations:
• Staple Templates For New Construction (does not apply to XT)
• Acoustic Enclosures (does not apply to XT)
• Fire Rated Back Cans
• Sonamp®Amplifiers for Power
• MediaLinQ®Interconnects and Wire
• Navigator Harbor Audio/Video Preamplifier
• Navigator Master Keypads
• Navigator K2 Touch Screen Keypad
• Sonance Volume Controls (rotary or slider)
• OptiLinQ™IR systems
• Navigator Network™audio keypad control system
• Other Sonance Speaker models
Specifications for the XTR:
• Woofer: 6-1/2” (165mm) one-piece, black anodized aluminum cone with a
rubber surround
• Tweeter: 1” (25mm) polyurethane dome
• Frequency Response: 55Hz - 20kHz + 3dB
• SPL: 89 dB 1w/1m
• Power Handling: 5 watts min. - 60 watts max.
• Impedance: 8 ohms nominal - 6 ohms minimum
• Grilles: Powder-coated stainless steel
• Speaker Dimensions: (Dia x D) 9-3/4” x 3-5/8” (248mm x 92mm)
• Cutout Dimensions: 8-5/32” (207mm)
• Weight: 3-3/4 lbs (1.4kg) per unit
Specifications for the XSSTR:
• Woofer: 6 1/2” (165mm) dual voice coil, one-piece black anodized
aluminum cone with a rubber surround
• Tweeter: Two 1” (25mm) polyurethane domes
• Frequency Response: 55Hz - 20kHz + 3dB
• SPL: 89 dB 1w/1m
• Power Handling: 5 watts min. 60 watts max.
• Impedance: 8 ohms nominal - 6 ohms minimum
• Grilles: Powder-coated stainless steel
• Speaker Dimensions (Dia x D): 9-3/4” x 5-3/16” (248mm x 132mm)
• Cutout Dimensions: 8-5/32” (207mm) diameter
• Weight: 4-3/4 lbs (1.8kg) per unit