Sonicpedal Destroyer User manual
©2009 Sonicpedal DOC-UM030-00
Congratulations on your purchase
of a Sonicpedal Destroyer!
This manual details the functionality,
specifications and operation of all three
models of the Destroyer line: Models A,
B, and C.
Although the Destroyer is simple to
setup and use, spend a few moments with
this manual to familiarize yourself with
the features and controls.
LIMITED WARRANTY INFO
Sonicpedal goes to great lengths to manufacture their
products with quality and pride. In the unlikely event
that your Destroyer is damaged or malfunctioning due to
workmanship or component errors, please contact us at
the phone number or e-mail address listed on the back of
this manual for instructions on returning the unit for
repair. If we determine that the unit qualifies for
warranty repair we will perform the repairs (up to and
including replacing the unit) and return the unit free of
charge. Standard shop rates apply otherwise.
This warranty is valid for 1 year after the purchase of
the unit. Register your Destroyer for warranty coverage
at:
www.sonicpedal.com/warranty
340 Western Rd. #14
Reno, NV 89506 USA
TEL: 775.856.9911
www.sonicpedal.com
D
De
es
st
tr
ro
oy
ye
er
r
Overdrive/Distortion
Pedal
User Manual
©2009 Sonicpedal DOC-UM030-00
Input Conditioning
Above are the Model C Input knobs. The top
row knobs (LEVEL/OVERDRIVE) are found on the
Model A Overdrive unit and the bottom row
knobs (LEVEL/DISTORTION) are found on the
Model B Distortion unit. The LEDs (YELLOW for
OVERDRIVE and RED for DISTORTION) are
found only on the Model C Combo unit.
3-Band EQ
The 3-Band EQ is pictured above. These 3 knobs
are found on all Destroyer models.
Filter Shaping
The FREQUENCY and DEPTH knobs are only
found on the Model C unit. They allow for
unique filter tones in conjunction with the 3-
Band EQ. The FREQUENCY knob adjusts the
filter center frequency up and down while the
DEPTH knob adjusts the filter q.
Switching
The BYPASS Switch is a true wire bypass switch
and is found on all models. The IN LED will
illuminate when the effect is active. The
CLIPPING Switch is only found on the Model C
unit and switches between the OVERDRIVE and
DISTORTION functions. The YELLOW LED
indicates that the OVERDRIVE is active; the RED
LED indicates that the DISTORTION is active.
Specifications
MECHANICAL
º6.6" x 4.3" x 2.4" (L x W x H)
º18 Ga Steel Enclosure
º1.2 lbs. (0.5Kg)
ºIN/OUT Jacks: 1/4" Phone, Mono
ELECTRICAL
ºPower Jack: 2.1mm, Center Positive
º9VDC Battery Compartment
º0.1W Power Consumption
FUNCTIONAL
ºTrue Wire Bypass Switch
ºEffect IN LED
ºSeparate Power Switch
ºPlugging in Battery Eliminator disconnects
battery
ºMagnetic latch on battery compartment
Sonicpedal blends classic
design with modern electronics to
produce an exciting new generation
of guitar effects pedals!
Destroyers are 100% solid-
state analog design (no tubes,
no microprocessors).
Effect Control
Effect Volume
Active Effect
Table of contents
