Mountainking Electronics Behemoth II User manual

DRIVE: This controls the strength of the signal
going into the circuit. Turning the knob to the right
increases the amount of clipping as well as the
output level. The intensity of all the other controls
is greatly affected by the level of the drive control.
CLIPPING VOICE: This three position toggle
switch determines how the signal is clipped.
Position 1 is the least compressed and distorted,
position 3 is the most compressed and distorted,
position 2, lies somewhere in between 1 and 3.
You may notice a slight popping sound when
switching from one position to another. This is
normal.
WAVEFORM: This controls the level of a frequen-
cy selective diode compression circuit. Its effect is
a combination of compression, clipping, and
filtering which intensifies as you turn the knob to
the right.
FILTER: This adjusts the low-pass filter circuit.
Turning the knob to the left allows you to roll off
degrees of high end.
BEHEMOTH II
All Mountainking Electronics devices are built with high quality parts and components to help ensure years of reliability.
This device can be powered by a 9V battery or a standard 9VDC (center negative) power supply. If you choose to use
a battery to power the pedal remember to unplug the instrument/guitar cable from the input jack when not in use to
help conserve battery life. If you choose to use a power supply, be sure that it is of high quality and is filtered to avoid
introducing hum and noise to your signal chain.
If you have any questions, comments, or concerns, please feel free to contact us:
[email protected]
GENERATION > TRANSMISSION > PERCETION
GENERATION >TRANSMISSION >PERCEPTION
FEATURES & SPECIFICATIONS:
100% handmade
original discrete circuit design
hand selected transistors
true bypass switching
dimensions 4.7”(W) x 3.7”(D) x 1.18”(H)
current consumption: 0.35 ma max.

GENERATION > TRANSMISSION > PERCETION
GENERATION >TRANSMISSION >PERCEPTION
NAME:
NAME:
NAME:
NAME:
FAVORITE SETTINGS
BEHEMOTH II