Sonim W100 User manual

Getting
started with
your new
Sonim®
USB W100
Contents
/01
© 2023 by Sonim Technologies, Inc. All rights reserved.
Sonim®USB
4G + WiFi
Modem W100
Quick Start
Guide

/02
1. USB interface
2. LED indicator
3. RESET pinhole
4. SIM card slot
LED Indicator
LED Color LED State Definition
Blue Solid LED Registered to 4G netwowrk
but data is not transferring
Blue Blinking LED
(1 blink per
second)
Registered to 4G netwowrk
and data is transferring
Green Solid LED Registered to 3G netwowrk
but data is not transferring
Green Blinking LED
(1 blink per
second)
Registered to 3G netwowrk
and data is transferring
Red Solid LED Not registered to network,
no SIM card, or SIM card
is locked.
Red &
Blue
Blinking
alternately
Firmware Over-The-Air
upgrade is in progress.
/03
2
1

/04 /05
4
3

/07
Step 3
Replace the back cover.
Step 4
Plug the device into the host device or PC
and it will power on automatically.
Install SIM card
and power on
Step 1
Remove the back cover.
Step 2
Insert SIM card (sold separately).
/06

/09
Support
Web: sonimtech.com
Email: [email protected]
Phone: [phone]
Monday - Friday: 24 hours a day
Saturday & Sunday: 9am-6pm ET
Download a User Guide:
from sonimtech.com or
call 1-833-MY-SONIM (1-833-697-6646)
Download this Quick Start Guide in Dutch,
French or German from sonimtech.com.
/08
Setting up
WiFi connection
Step 1
Insert USB modem into host device.
Step 2
Search available WiFi networks.
Step 3
Select the SSID of USB modem.
Step 4
Input WiFi password.
Step 5
WiFi connection will be set up automatically.
Note: You can find the label for the default
SSID and password under the back cover.
Device management
Please log in to the Web UI at
http://sonim.usb or http://192.168.1.1
Default username/password: admin/admin