Sonoma 71SRRFS17 User manual

Page 1/2
PART LIST QUANTITY
A2 PCS
TO CLOSE:
STEP 2
A. FIRMLY AND SWIFTLY PULL UP ON THE SEAT
FRONT TO DISENGAGE LOCKS.
B. LIFT THE FRONT OF THE SEAT TOWARD THE
CHAIR BACK.
ASSEMBLE ON A FLAT, PROTECTED SURFACE
MESH FOLDING CHAIR
FIGURE
DESCRIPTION
TO OPEN:
STEP 1
A. PULL THE SEAT FRONT FORWARD AS SHOWN.
B. PUSH THE FRONT OF THE SEAT DOWN FIRMLY
UNTIL IT LATCHES SECURLY.
SAVE THESE INSTRUCTIONS
SONOMA 3 PC FOLDING METAL MESH SET ASSEMBLY INSTRUCTIONS
STYLE #: 71SRRFS17

Page 2/2
PART LIST QUANTITY
B1 PC
WEIGHT LIMIT
MESH FOLDING CHAIR: 250 LBS; MESH FOLDING TABLE: 50 LBS
CARE AND CLEANING
WIPE CLEAN WITH A SOFT,DAMP CLOTH AS NEEDED.
DO NOT STAND OR CLIMB ON CHAIRS.
DO NOT SIT, STAND, OR CLIMB ON TABLE.
WARRANTY
1 YEAR LIMITED WARRANTY. COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, ABUSIVE USE,
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS RESULT OF CHEMICALS OR SPILLS IS NOT
COVERED. PROOF OF PURCHASE (DATED RECEIPT) IS REQUIRED FOR WARRANTY CLAIMS. WE
RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE.
FIGURE
TO OPEN:
STEP 1
A. WITH TABLE FACING AS SHOWN, LIFT THE FRONT
EDGE OF THE TABLE UP WHILE PUSHING THE BACK
EDGE OF THE TABLE DOWN TO EXTEND THE LEGS.
B. TURN THE LATCH TO SECURE THE TABLE INTO
THE OPEN POSITION.
STYLE #: 71SRRFS17
DESCRIPTION
ASSEMBLY INSTRUCTIONS (CONTINUED)
TO CLOSE:
STEP 2
A. TURN THE LATCH MECHANISM TO UNLOCK.
B. PUSH THE FRONT EDGE OF THE TABLE DOWN
WHILE LIFTING THE BACK UNTIL THE LEGS CLOSE
AND THE TABLE IS COMPLETELY FOLDED CLOSE.
MESH FOLDING TABLE