Sony PXW-Z190T User manual

4-740-700-16(1)
Solid-State Memory
Camcorder
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
PXW-Z190V/PXW-Z190T
Software Version 4.0
© 2018 Sony Corporation

2
Overview
Location and Function of Parts ............................................... 7
Main unit ........................................................................ 7
Screen Display ......................................................................... 12
LCD/viewfinder screen ................................................ 12
Status screen ................................................................. 15
Preparation
Power Supply ........................................................................... 21
Using a battery pack ..................................................... 21
Using AC power ........................................................... 22
Turning the camcorder on/off ...................................... 22
Setting the Clock ..................................................................... 23
Attaching Devices .................................................................... 23
Attaching the lens hood ................................................ 23
Attaching the large eyecup ........................................... 23
Adjusting the Screens ............................................................. 24
Adjusting the LCD screen ............................................ 24
Adjusting the viewfinder .............................................. 24
Adjusting the brightness of the LCD/viewfinder screen
using an assignable button ..................................... 24
Using Memory Cards .............................................................. 25
About memory cards .................................................... 25
Inserting memory cards ................................................ 25
Removing a memory card ............................................ 25
Switching between memory cards ............................... 25
Formatting (initializing) a memory card ...................... 25
Checking the remaining recording time ....................... 26
Restoring a memory card ............................................. 26
Setting the Password for Network Access
Authentication ................................................................... 27
Shooting
Basic Operation Procedure .................................................... 28
Shooting ....................................................................... 28
Adjusting the zoom ...................................................... 29
Table of Contents

3
Adjusting the focus ...................................................... 30
Monitoring audio while shooting ................................. 31
Changing Basic Settings ......................................................... 31
Video format ................................................................ 31
Adjusting the brightness ............................................... 32
Adjusting for natural colors (white balance) ................ 33
Setting the audio to record ........................................... 35
Image stabilization ....................................................... 37
Time data ...................................................................... 37
Useful Functions ...................................................................... 38
Direct menu operation .................................................. 38
Face detection AF ........................................................ 39
Color bars/reference audio tone ................................... 40
Reviewing a recording (Rec Review) .......................... 40
Assignable buttons ....................................................... 40
Interval recording (Interval Rec) .................................. 41
Continuous recording (Clip Continuous Rec)
(exFAT) ................................................................. 42
Picture cache recording (Picture Cache Rec) ............... 43
Slow & Quick Motion .................................................. 43
Simultaneous recording in 2 slots (Simul Rec) ............ 44
4K & HD (Sub) recording ............................................ 45
High dynamic range (HDR) recording ......................... 46
Acquiring location information (GPS) ......................... 47
Planning Metadata .................................................................. 48
Loading a planning metadata file ................................. 48
Defining a clip name in planning metadata .................. 48
Proxy Recording ..................................................................... 49
Supported SD cards ...................................................... 49
Formatting (initializing) SD cards ............................... 49
Checking the remaining capacity ................................. 50
Proxy recording (Proxy Rec) ....................................... 50
Changing proxy recording settings .............................. 50
About the recorded file ................................................. 50
Storage destination of the recorded file ....................... 50
About the file name ...................................................... 50
Recording proxy data only ........................................... 50
Connecting to Other Devices via LAN .................................. 51
Connecting using wireless LAN access point mode .... 52
Connecting using wireless LAN station mode ............. 53
Connecting to a device using a LAN cable .................. 55
Connecting to the Internet ..................................................... 57
Connecting using a modem/smartphone ...................... 57
Connecting using wireless LAN station mode ............. 58
Connecting using a LAN cable .................................... 58

4
List of functions for network connections ................... 59
Uploading a File ...................................................................... 60
Preparations .................................................................. 60
Selecting a file and uploading ...................................... 61
Uploading proxy files automatically ............................ 61
Uploading using Secure FTP ....................................... 62
Transmitting Streaming Video and Audio ........................... 62
Starting streaming ........................................................ 63
Stopping streaming ....................................................... 63
Network client mode .................................................... 63
Transmitting RTMP/RTMPS Streaming Video and
Audio .................................................................................. 67
Starting RTMP/RTMPS streaming .............................. 67
Stopping RTMP/RTMPS streaming ............................ 68
Using Web Remote Control ................................................... 69
Web Remote Control Menu ................................................... 70
Video monitoring settings (Monitoring Settings) ........ 70
File transfer settings (Upload Settings) ........................ 71
File transfer management (File Transfer) .................... 72
Thumbnail Screen
Configuration of the Thumbnail Screen ............................... 74
Playing Clips ............................................................................ 75
Playing recorded clips .................................................. 75
Playing the selected and subsequent clips in
sequence ................................................................. 75
Monitoring audio during playback ............................... 75
Clip Operations ....................................................................... 76
Thumbnail menu operations ......................................... 76
Displaying clip properties ............................................ 77
Protecting clips (exFAT) .............................................. 78
Copying clips ............................................................... 78
Deleting clips ............................................................... 79
Filtering clips (frames) using the essence mark
thumbnail screen (exFAT) ..................................... 79
Uploading clips from the thumbnail screen or
filtered clip thumbnail screen (exFAT, FAT) ........ 79
Changing the information displayed on the thumbnail
screen ..................................................................... 79
External Device Connection
Connecting External Monitors and Recording Devices ...... 80

5
Managing/Editing Clips on a Computer ............................... 81
Connecting using a USB cable ..................................... 81
Connecting an external HDD/USB media ................... 81
Menu Display and Settings
Setup Menu Configuration and Hierarchy .......................... 84
Setup menu hierarchy ................................................... 84
Setup Menu Operations .......................................................... 86
Editing the User menu .................................................. 88
Setup Menu List ...................................................................... 90
User menu .................................................................... 90
Edit User Menu menu .................................................. 90
Camera menu ............................................................... 91
Paint menu .................................................................... 94
Audio menu .................................................................. 99
Video menu ................................................................ 101
LCD/VF menu ............................................................ 101
TC/UB menu .............................................................. 105
Recording menu ......................................................... 105
Thumbnail menu ........................................................ 107
Media menu ................................................................ 109
File menu .................................................................... 111
Network menu ............................................................ 113
System menu .............................................................. 120
Saving and Loading Configuration Data
Configuration Data ............................................................... 125
Media supported for saving configuration data ......... 125
Formatting (initializing) media .................................. 125
Checking the remaining capacity ............................... 125
Saving a user file / ALL file ....................................... 126
Loading a user file / ALL file .................................... 126
Saving a scene file ...................................................... 126
Loading a scene file ................................................... 127
To change the File ID ................................................. 127
Appendix
Important Notes on Operation ............................................ 128
Using your camcorder abroad .................................... 128
Video Formats ....................................................................... 134
About recording media ............................................... 134

6
Special recording modes and compatible formats ..... 135
Maximum recording time for a clip ........................... 135
Output Formats and Limitations ........................................ 136
Video formats and output signals ............................... 136
Network and video output combinations ................... 139
Limitations between recording functions ................... 139
Items Saved in an All File/Scene File .................................. 140
Camera ....................................................................... 140
Paint ............................................................................ 141
Audio .......................................................................... 143
Video .......................................................................... 143
LCD/VF ...................................................................... 144
TC/UB ........................................................................ 146
Recording ................................................................... 146
Thumbnail .................................................................. 146
Media .......................................................................... 147
File .............................................................................. 148
Network ...................................................................... 148
System ........................................................................ 151
Troubleshooting .................................................................... 153
Power supply .............................................................. 153
Recording/playback .................................................... 153
External devices ......................................................... 154
Wireless LAN connection .......................................... 154
Internet connection ..................................................... 154
Error/Warning/Caution Indications ................................... 155
Error indications ......................................................... 155
Warning indications ................................................... 155
Caution and operation messages ................................ 156
Messages if camcorder operation cannot be
executed ............................................................... 158
Block Diagrams ..................................................................... 159
Specifications ......................................................................... 162
General ....................................................................... 162
Lens ............................................................................ 164
Camera ....................................................................... 164
Wireless LAN ............................................................. 164
Inputs/outputs ............................................................. 164
Display ....................................................................... 165
Internal microphone ................................................... 165
Media slots ................................................................. 165
Supplied accessories ................................................... 165
Index ....................................................................................... 168

7
For details about the usage and function of each part, see the referenced page.
1. Hook for shoulder strap (10)
2. ASSIGN7/DIRECT MENU button (40)
3. (N mark)
• Hold an NFC-compatible smartphone near
this mark to establish a wireless connection
between the camcorder and smartphone.
For details, refer to the operating
instructions of the smartphone.
• NFC (Near Field Communication) is an
international standard for short-range radio
communication.
4. ASSIGN8/FOCUS MAG button
5. Multi Interface Shoe (rear)
For details about accessories supported by the
Multi Interface Shoe, contact your sales
representative.
Note
• Do not use accessories with attached screws.
These may damage the multi-interface shoe.
6. Microphone clamper
7. Microphone holder (36)
8. GPS antenna
9. Multi Interface Shoe (front)
Note
• Do not use accessories with attached screws.
These may damage the multi-interface shoe.
10. Power zoom lever (29)
11. Wi-Fi antenna
Overview
Location and Function of Parts
Main unit

8
1. Internal microphone (35)
2. Recording/tally lamp (front) (123)
Lit while recording.
Flashes when the remaining capacity on the
recording media or battery is low.
3. ASSIGN6 button
4. FULL AUTO button (28)
5. ND FILTER switch
6. ND FILTER mode switch
7. FOCUS switch (30)
8. ASSIGN3/VIDEO SIGNAL MONITOR
button
9. ASSIGN1/ZEBRA button
10. ASSIGN2/PEAKING button
11. INPUT1 switch (35)
12. CH1 (INT/EXT/MI SHOE) switch (35)
13. AUDIO LEVEL (CH1) dial (35)
14. AUDIO LEVEL (CH2) dial (35)
15. CH2 (INT/EXT/MI SHOE) switch
16. INPUT2 switch (35)
17. ASSIGN5 button
18. SHUTTER switch
19. ASSIGN4 button
20. FOCUS PUSH AUTO/HOLD button (30)
21. ND control dial
22. WB SET button
23. Lens hood with lens cover (23)

9
1. BATT RELEASE button (21)
2. Battery pack attachment (21)
3. Multi/Micro USB connector (81)
4. USB3.0 (HOST) connector (type A)
5. SDI OUT connector (80)
6. Diopter adjustment dial (24)
7. ON/STANDBY switch (22)
?: ON
1: STANDBY
8. Power lamp
9. USB2.0 (HOST) connector (type A)
10. IN/OUT (input/output selector) switch
11. Air outlet
Notes
• Areas around the air outlet may become hot.
• Do not cover the air outlet.
12. Handle zoom lever (29)
13. Handle record button
When the lever is set to the HOLD position, the
handle record button is not operable.
14. AUDIO INPUT1 connector (35)
15. AUDIO INPUT2 connector (35)
16. Cable holder
Provided for securing a microphone cable, etc.
17. Grip belt
18. Multi selector (V/v/B/b/SET button)
19. Record button (28)
20. Air inlet
Note
• Do not cover the air inlet.
21. REMOTE connector
The REMOTE connector is used for controlling
start/stop of recording and other functions on the
video device and peripherals connected to it.
22. Cable clamper
Note
• Do not use for any purpose other than securing
cables.
23. Wired LAN connector
24. TC IN/OUT connector
25. HDMI OUT connector (80)
26. UTILITY SD/MS slot/access lamp
Used for proxy recording and storing/loading
settings (File function), and when upgrading
(software update).

10
1. Zoom ring (30)
2. Focus ring (30)
3. Full MF switch (30)
Switch manual focus mode on/off by moving
the focus ring forward/back.
4. Lens cover lever (23)
Opens/closes the lens cover.
5. Hook for shoulder strap
6. Iris ring (32)
7. i(headphone) jack
For stereo mini-jack headphones.
8. Recording/tally lamp (rear) (123)
Lit while recording.
Flashes when the remaining capacity on the
recording media or battery is low.
9. SLOT SELECT button
10. Memory card slot A
11. Memory card A access lamp (25)
12. Memory card slot B
13. Memory card B access lamp (25)
14. DC IN connector
15. CANCEL/BACK button (86)
16. SEL/SET dial (86)
17. MENU button (86)
Button has a raised tactile bar for your
convenience in locating the button.
18. WHT BAL switch (34)
19. GAIN switch (32)
20. IRIS PUSH AUTO button
21. IRIS switch (32)
To attach a shoulder strap
Attach a shoulder strap to the hooks for the
shoulder strap.

11
1. THUMBNAIL button (74)
2. STOP/CAM button (75)
3. STATUS CHECK button (15)
4. PREV button (75)
5. V/v/B/b/SET button (86)
6. MENU button (86)
7. F REV button (75)
8. PLAY/PAUSE button (75)
9. F FWD button (75)
10. NEXT button (75)
11. LCD BRIGHT button (24)
12. DISPLAY button (12)
13. LCD screen (24)
14. Viewfinder (24)
15. Large eyecup
16. Air inlet
Note
• Do not cover the air inlet.
17. VOLUME buttons (31)
18. DURATION/TC/U-BIT button (38)
19. CANCEL button (86)
Bottom Side
1. Tripod screw holes (1/4 inch, 3/8 inch)
Compatible with 1/4-20UNC screws and 3/8-
16UNC screws.
Attach to a tripod (sold separately, screw length
of 5.5 mm or less).

12
While recording, standing by to record, or during playback, the statuses and settings of the camcorder are
superimposed on the LCD/viewfinder screen.
You can show/hide the information using the DISPLAY button.
You can also select to show/hide each item independently (page 103).
1. Network status indicator (page 14)
Displays the status of the network connection as
an icon.
The icon display varies depending on whether
the NETWORK upgrade license (option) is
installed or not.
2. Uploading/Number of files to transfer
indicator
Displayed when the NETWORK upgrade
license (option) is installed.
3. Recording mode/slot A/B operation status
indicator
4. Depth-of-field indicator
5. Intercom indicator (page 15)
Displays the status of the intercom connection
as an icon.
Displayed when the NETWORK upgrade
license (option) is installed.
6. Network client mode status indicator
(page 15)
Streaming status indicator (page 15)
RTMP/RTMPS streaming status
indicator (page 15)
All displayed when the NETWORK upgrade
license (option) is installed.
7. Digital UWP unit RF level indicator
(page 15)
Displays the RF signal strength using icons
when using a digitally-connected wireless audio
receiver.
8. Slow & Quick Motion shooting frame rate
indicator
9. Remaining battery capacity/DC IN
voltage indicator
Screen Display
LCD/viewfinder screen
Information displayed on the screen while shooting
zRec Recording
Stby Recording standby

13
10. Focus mode indicator (page 39)
a) Displayed when there is no registered face and
no faces are detected, and when there is a
registered face but it is not detected.
Note
• Numerical value for depth of field is a guide.
11. Zoom position indicator
Displays zoom position in the range of 0 (wide
angle) to 99 (telephoto).
12. GPS status indicator
13. Image stabilization mode (SteadyShot)
indicator
14. SDI output/HDMI output Rec Control
indicator
Displayed when Display On/Off >SDI/HDMI
Rec Control in the LCD/VF menu and SDI/
HDMI Rec Control >Setting in the Video menu
are both set to On.
15. Digital extender indicator (page 122)
16. Focus assist indicator
Note
• Not displayed when using face detection AF.
17. Media remaining capacity indicator
18. White balance mode indicator
19. Timecode indicator (page 38)
20. ND filter indicator (page 33)
21. Scene file indicator (page 125)
22. Iris position indicator
23. Video level warning indicator
24. Gain indicator (page 32)
25. Shutter mode/shutter speed indicator
26. AE mode/AE level indicator (page 33)
27. Audio level meter
28. VIDEO SIGNAL MONITOR display
(waveform monitor/vectorscope/
histogram)
Notes
• Not displayed when Output Format in the Video
menu is set to 3840×2160P.
• Not displayed when Output On/Off >SDI in the
Video menu is set to Off.
29. Clip name indicator
30. Recording format (codec) indicator
(page 120)
Displays the format that is recorded on a
memory card.
31. Gamma display assist indicator
32. Gamma indicator
For the gamma display value in HDR mode, see
page 94. For the gamma display value in SDR
mode, see page 96.
33. Proxy status indicator
34. 4K & HD (Sub) recording indicator
Displayed when the MPEG HD upgrade license
(option) is installed.
35. System frequency and scan method
indicator
36. Recording format (picture size) indicator
(page 120)
Displays the picture size that is recorded on a
memory card.
Information displayed on the playback screen
The following information is superimposed on
the playback picture.
Full MF mode
MF mode
AF mode
Face detection AF ( )
Face detection icon
Face only AF icon
Registered face icon
Face Only AF mode auto
focus paused icon a)
ATW Automatic mode
ATW Hold Pause automatic mode
W:P Preset mode
W:A Memory A mode
W:B Memory B mode

14
1. Network status indicator
The icon display varies depending on whether
the NETWORK upgrade license (option) is
installed or not.
2. Uploading/Number of files to transfer
indicator
Displayed when the NETWORK upgrade
license (option) is installed.
3. Clip number/Total number of clips
4. Playback mode indicator
5. Playback format (frame rate) indicator
6. Intercom indicator
Displayed when the NETWORK upgrade
license (option) is installed.
7. Network client mode status indicator
Streaming status indicator
RTMP/RTMPS streaming status
indicator
All displayed when the NETWORK upgrade
license (option) is installed.
8. Playback format (picture size) indicator
9. Remaining battery capacity/DC IN
voltage indicator
10. Playback format (codec) indicator
11. Media indicator
A mark appears to the left if the memory
card is write-protected.
12. Time data indicator
The time data is displayed when Display On/Off
>Timecode in the LCD/VF menu is set to On
and the DISPLAY button is pressed.
13. Clip name indicator
14. Gamma display assist indicator
15. Audio level meter
16. Gamma indicator
Network connection icon indicators
<Display example with two modems connected>
Network
mode
Connection
status
Icon
Access point
mode
Operating as an
access point
Access point
operation error
Station mode Wi-Fi connected
Wi-Fi signal
strength (4 levels)
Wi-Fi
disconnected
(incl. during
setup)
Wi-Fi connection
error
Modem/
smartphone
3G/4G signal
strength (5 levels)
3G connected
–
4G connected
–
Network
connection (3G/
4G indeterminate)
–
3G/4G
disconnected
(incl. during
setup)
3G/4G
connection error
Signal strength
unknown
(strength not
reported by
connected
modem/
smartphone or
other device)
Wired LAN LAN connected
LAN
disconnected
(incl. during
setup)
LAN connection
error
Connection status Icon
Only Modem1 in use
Only Modem2 in use
Both in use
Network
mode
Connection
status
Icon

15
Intercom connection icon indicators
Network client mode icon indicators
Streaming icon indicators
RTMP/RTMPS streaming icon indicators
Digital UWP unit RF level icon indicators
You can check the settings and status of the
camcorder on the status screen.
Status screen operations
To display the status screen:
• Push the STATUS CHECK button.
To switch the status screen:
• Turn the SEL/SET dial or press the V/vbutton.
To hide the status screen:
• Push the STATUS CHECK button.
Camera Status screen
Displays the picture quality, zoom settings, and
status.
Connection status Icon
• Network Client Mode is Off
• Network Client Mode is On and
headset not connected
None
• Network Client Mode is On
• Headset connected
• Headset connection supported,
but not connected (connection
ready state)
• Network Client Mode is On
• Headset connected
• Intercom connection disabled
state
• Network Client Mode is On
• Call ready state, with headset
and intercom connected
Networkt
Network Client
ModetSetting
Connection
status
Icon
Off – None
On Normal
Disconnected
(standby)
Connection
error
Networkt
Streamingt
Setting
Connection
status
Icon
Off – None
On Normal
(Streaming is
in progress)
Configuring
(Transitioning
to streaming)
Transmission
error
Networkt
RTMP/
RTMPSt
Setting
Connection
status
Icon
Off – None
On Normal
(RTMP
streaming is in
progress)
Configuring
(Transitioning
to RTMP
streaming)
Transmission
error
Transmitter
status
Reception
status
Icon
Powered off Not
receiving
Normal transmission
state
Receiving
~
(4-level signal
strength indicator)
Muted state Receiving
(muted)
Remaining battery
capacity warning
state
Receiving
(Icon flashing)
Muted / Remaining
battery capacity
warning state
Receiving
(Icon flashing)
Status screen
Networkt
RTMP/
RTMPSt
Setting
Connection
status
Icon

16
Audio Status screen
Displays the input setting, audio level meter, and
wind noise reduction filter setting for each
channel.
System Status screen
Displays the video signal settings.
Video Output Status screen
Displays the SDI and HDMI output settings.
Assignable Button Status screen
Displays the functions assigned to each of the
assignable buttons.
White Switch<B> White balance memory B
adjustment value
White Switch<A> White balance memory A
adjustment value
White Switch<P> Preset White setting
ND<Preset> Preset1 to 3 setting for ND
Filter
Zebra1 Zebra1 On/Off setting and
level
Zebra2 Zebra2 On/Off setting and
level
Gamma Gamma category and curve
Gain Switch Gain<L>, Gain<M>,
Gain<H> setting
Handle Zoom Speed Handle Zoom setting
Scene File Current scene file and file ID
CH1 level meter CH1 level meter
CH1 Input Source CH1 input source
CH1 Ref./Sens. CH1 input reference level
CH1 Wind Filter CH1 microphone wind
reduction filter setting
CH2 level meter CH2 level meter
CH2 Input Source CH2 input source
CH2 Ref./Sens. CH2 input reference level
CH2 Wind Filter CH2 microphone wind
reduction filter setting
CH3 level meter CH3 level meter
CH3 Input Source CH3 input source
CH3 Ref./Sens. CH3 input reference level
CH3 Wind Filter CH3 microphone wind
reduction filter setting
CH4 level meter CH4 level meter
CH4 Input Source CH4 input source
CH4 Ref./Sens. CH4 input reference level
CH4 Wind Filter CH4 microphone wind
reduction filter setting
HDMI Output CH HDMI output audio channel
combination setting
Analog Output CH Analog output audio channel
combination setting
Monitor CH Monitor channel setting
Headphone Out Headphone output type
setting
Frequency/Scan System frequency and
scanning method settings
File System File system setting
Displayed when the MPEG
HD upgrade license (option)
is installed.
Codec Codec setting
Simul Rec 2-slot Simul Rec On/Off
status
Title Prefix Clip name title prefix
Picture Size Recording format picture size
Rec Function Enabled special recording
format and settings
Clip Continuous Rec Clip Continuous Rec On/Off
status
Picture Cache Rec Picture Cache Rec On/Off
status and setting
Number Clip name numeric suffix
Shooting Mode Shooting mode setting
4K & HD (Sub) Rec 4K & HD (Sub) recording
function On/Off status
Displayed when the MPEG
HD upgrade license (option)
is installed.
Proxy Rec Proxy recording On/Off
status and setting
SDI Output picture size
Rec Control status
Output On/Off
HDMI Output picture size
Rec Control status
Output On/Off
Gamma Gamma setting
Color Gamut Color gamut setting
Gamma Display Assist Gamma display assist setting
1 Function assigned to the
Assign 1 button
2 Function assigned to the
Assign 2 button
3 Function assigned to the
Assign 3 button
4 Function assigned to the
Assign 4 button

17
Battery Status screen
Displays information about the battery and DC IN
source.
Media Status screen
Displays the remaining space, available recording
time, and estimated service life of the recording
media (memory card A/memory card B) and
UTILITY media.
Rec Button Settings Status screen
Displays the setting status of the record button
and handle record button.
GPS Status screen
Displays the GPS positioning status and
information.
5 Function assigned to the
Assign 5 button
6 Function assigned to the
Assign 6 button
7 Function assigned to the
Assign 7 button
8 Function assigned to the
Assign 8 button
Detected Battery Battery type
Remaining Remaining capacity (%)
Charge Count Number of recharges
Capacity Remaining capacity (Ah)
Voltage Voltage (V)
Manufacture Date Date of battery manufacture
Video Light Remaining Remaining charge level of the
video light battery
Power Source Power supply source
Supplied Voltage Supplied power source
voltage
Media A information Displays the media icon
when recording media is
inserted in slot A.
Media A protection Displays the lock icon when
the recording media inserted
in slot A is protected
(locked).
Media A remaining
capacity meter
Displays the remaining
capacity of recording media
inserted in slot A expressed
as a percentage on a bar
graph.
Media A remaining
recording time
Displays an estimate of the
remaining recording time of
the recording media inserted
in slot A in units of minutes
under the current recording
conditions.
Media B information Displays the media icon
when recording media is
inserted in slot B.
Media B protection Displays the lock icon when
the recording media inserted
in slot B is protected
(locked).
Media B remaining
capacity meter
Displays the remaining
capacity of recording media
inserted in slot B expressed
as a percentage on a bar
graph.
Media B remaining
recording time
Displays an estimate of the
remaining recording time of
the recording media inserted
in slot B in units of minutes
under the current recording
conditions.
UTILITY media
information
Displays the media icon
when media is inserted in the
UTILITY SD/MS slot.
UTILITY media
protection
Displays the lock icon when
the media inserted in the
UTILITY SD/MS slot is
protected (locked).
UTILITY media
remaining capacity
meter
Displays the remaining
capacity of media inserted in
the UTILITY SD/MS slot
expressed as a percentage on
a bar graph.
UTILITY media
remaining capacity
Displays an estimate of the
remaining recording time of
the recording media inserted
in the UTILITY SD/MS slot
in units of minutes. Or
displays the remaining
capacity in units of GB.
Rec Button Displays the recording target
slot of the record button
Handle Rec Button Displays the recording target
slot of the handle record
button
GPS GPS signal positioning status
Dilution of Precision Position information
precision
Latitude Latitude information
Longitude Longitude information
Altitude Altitude information

18
Network Status screen
Displays the connection status of the network
connection.
Wired LAN, Modem1, and Modem2 are
displayed when the NETWORK upgrade license
(option) is installed.
Wireless LAN settings
Wired LAN settings
Modem1 and Modem2 settings
NCM/Streaming Status screen
Displays the connection status and streaming
status in network client mode. Displayed when
the NETWORK upgrade license (option) is
installed.
Positioning date and
time
Positioning date and time
Current date and time Current date and time
Time Zone Time zone setting
Wireless LAN Wireless network settings,
connection status
Wired LAN Wired LAN network settings,
connection status
Modem1 Wireless network settings,
connection status using
modem/smartphone
Modem2 Wireless network settings,
connection status using
modem/smartphone
Setting
display
Status
display
Description
Off --- Wireless LAN
setting is off.
Access Point
Mode
Non Active Not operating as an
access point.
Displayed when
Wi-Fi chip fails.
Active Operating as an
access point.
Station Mode Non Active Not operating in
station mode.
Displayed when
Wi-Fi chip fails.
Searching Attempting to
connect to the
previously
connected network
(access point).
Disconnected Not connected to a
network (access
point).
Also displayed
when IP address
was not assigned
using DHCP.
<SSID> Connected to
<SSID> network
(access point).
Setting
display
Status
display
Description
Off --- Wired LAN setting
is off.
On Disconnected Disconnected from
network.
Also displayed
when IP address
was not assigned
using DHCP.
Connected Connected to a
network.
Setting
display
Status
display
Description
Off --- Modem/
smartphone setting
is off.
On Disconnected Not connected to a
network.
Connected Connected to a
network.
Connecting Attempting to
connect to a
network.
No Modem Modem dongle is
not inserted, or
smartphone is not
connected
Network Mode Status Network function (network
client mode, streaming,
RTMP/RTMPS streaming)
connection status
CCM Name Name of connected CCM in
network client mode
CCM Address Address of connected CCM
in network client mode
QoS Streaming1 Bit
Rate
Streaming bit rate 1
QoS Streaming2 Bit
Rate
Streaming bit rate 2
Streaming Status Streaming status
Streaming Format Streaming format
information

19
Network Mode Status settings
Displayed when the NETWORK upgrade license
(option) is installed.
Network client mode and RTMP/RTMPS
streaming display
Streaming Status display
Streaming Type Type of currently selected
streaming setting
Streaming Destination
Address
Streaming destination
address
Streaming Audio
Channel
Audio channel to
superimpose on streaming
output
Note
• CH1/CH2 (fixed) during
RTMP/RTMPS streaming.
Status display Description
Off Network client mode and
RTMP/RTMPS streaming are
off.
CCM: Connected Network client mode is on,
CCM/XDCAM air is
connected, and control from
CCM/XDCAM air is
enabled.
CCM: Connecting Attempting to connect to
CCM/XDCAM air.
Note
• If the status does not change
from “CCM: Connecting,”
the CCM address setting
may be incorrect. Check
that the address is set
correctly.
CCM: Dest-Addr. Error The host name or IP address
of the CCM to connect may
be incorrect.
CCM: Auth. Failed The user name or password
used to connect to the CCM
may be incorrect.
CCM: No Network
Access
Cannot connect to a network
in network client mode.
Check the network
connection status and
settings.
CCM: Cert. Not Valid
Yet
The CCM certificate is not
valid.
The network date and time
settings may be incorrect.
CCM: Cert. has Expired The period of validity of the
CCM certificate has expired.
The network date and time
settings may be incorrect.
CCM: Root Cert. Error The CCM root certificate is
invalid.
Note
• If this error message is
displayed, contact your
Sony service representative.
CCM: Inter. Cert. Error The CCM intermediate
certificate is invalid.
Note
• If this error message is
displayed, contact your
Sony service representative.
CCM: Server Cert.
Error
The CCM server certificate is
invalid.
Note
• If this error message is
displayed, contact your
Sony service representative.
RTMP: Connected Connected to RTMP server,
and RTMP/RTMPS
streaming is enabled.
RTMP: Connecting Attempting to connect to an
RTMP server.
Note
• If the status does not change
from “RTMP: Connecting,”
the RTMP server address
setting may be incorrect.
Check that the address is set
correctly.
RTMP: Dest. Addr.
Error
The host name or IP address
of the RTMP server to
connect may be incorrect.
RTMP: No Network
Access
Cannot connect to a network
using RTMP streaming.
Check the network
connection status and
settings.
RTMP: Server Cert.
Error
The server certificate for
RTMP streaming connection
is invalid.
Status display Description
Off Streaming is off.
Distributing Streaming is in progress.
Preparing Preparing for streaming.
Status display Description

20
File Transfer Status screen
Displays file transfer information. Displayed
when the NETWORK upgrade license (option) is
installed.
Destination Address
Error
The host name or IP address
of the streaming destination
may be incorrect.
No Network Access Cannot connect to a network.
Check the network
connection status and
settings.
Auto Upload (Proxy) Auto Upload (Proxy) On/Off
status
Job Status(Remain/
Total)
Number of remaining jobs
and total number of jobs
Total Transfer Progress Transfer progress of total jobs
Default Upload Server Name of the destination
server for auto upload of
proxy files and upload of files
from the thumbnail screen
Current File Transfer
Progress
Transfer progress of file
currently being uploaded.
Current Transferring
File Name
Name of file currently being
uploaded.
Server Address Address of file transfer server
Destination Directory Destination directory of file
transfer server
Status display Description