Sony XDP-PK1000 User manual

Make your iPod touch® or iPhone® digital music sound crisp and clear using your
factory audio system with the Sony® XDP-PK1000 Digital Link Sound System.1 The
internal DSP processing will brighten your front soundstage while bass response is
increased with the 300 watt Class D amp and sealed 12 inch subwoofer enclosure.
Specications
XDP-PK1000 XDP-PK1000 Digital Link Sound System
Bullets
• iPod touch®/iPhone® integration for your factory audio system1
• Hide-away DSP processor creates balanced front stage
• Convenient setup to optimize sound output
• Built in 45 watts x 4 channel for interior speakers
• 2V front, rear and sub pre-amp output
• Dedicated 300 watt RMS Class-D subwoofer amp
• Slim design sealed 12” subwoofer enclosure
• Convenient wireless remote
Amplier Section
Max power output DSP Unit: 45 watts x 4 at 4 ohms
Amplier: 600 watts x 1 at 4 ohms
Power Ad Hoc
CEA2006
DSP: 17W RMS @ 4 Ohms, 20Hz-20kHz, 1% THD+N
Amplier: 300W RMS @ 4 Ohms, 20Hz-100Hz, 1% THD+N
Speaker Impedance 4-8 Ohms
Features
iPod touch® and iPhone® integration1
Improve the sound of your iPod touch® or iPhone® digital music using your factory audio system.1 Control
playback of internally stored audio content or listen to audio from your wireless audio apps on your device with
the adjustable dash mounted cradle.
DSP processing
Internal DSP processing improves both your factory audio system playback and your iPod touch® or iPhone®
playback.1 The system enables adjustment of time alignment, equalization and crossover points to deliver an
incredible audio experience.
Customizable Setup
Sound is customized to t your ride. The hide-away DSP processor utilizes 3 multi-position switches to adjust 18
dierent DSP parameters.
High-powered Expansion
Whether using the internal 45W x 4 high power amplier for your speakers or the 2 Volt Front, Rear and Sub RCA
pre-amp outputs to feed an external amplier, you can dial in the output for optimum sound.
Powerful subwoofer amplier
The high eciency, Class-D design subwoofer amplier produces 300 watts RMS.
12” Subwoofer Enclosure
A compact, sealed subwoofer enclosure uses a Sony® original 12” dimpled design subwoofer for powerful bass
response.
Wireless Remote Control
The included wireless remote lets you control the basic functions of your XDP-PK1000.

AMP & General Feature
Automatic Level Optimizer Yes
Bass/Treble Bass: +/- 7 dB @ 100HZ, Treble: +/- 7 dB @ 7 kHz
Low Pass Filter Amplier: Fixed LPF @ 120 Hz., 12 dB/Oct.
Output Power (4ohm, 1kHz,16V)(W) DSP Unit: 45 watts x 4 at 4 ohms
Amplier: 600 watts x 1 at 4 ohms
Pre Out (3) Front, Rear and Sub
Time Alignment Custom Yes (Adjustment)
Time Alignment Preset Yes
Audio
Impedance Subwoofer: 4 Ohms
Preout Impedance 220 ohms
Preout Voltage 2 volt
S/N Ratio
Audio Power:
DSP unit: S/N 80 dBA
Amplier: 65 dBA
Convenience Features
Key Illumination White
General
Magnet Subwoofer: Ferrite
Material Subwoofer: Polypropylene cone
CEA2006 output power DSP: 17W RMS @ 4 Ohms, 20Hz-20kHz, 1% THD+N
Amplier: 300W RMS @ 4 Ohms, 20Hz-100Hz, 1% THD+N
CEA2006 S/N DSP unit: S/N 80 dBA
Amplier: 65 dBA
Dimensions (WxHxD) (mm) DSP: 8.375 x 1.625 x 6.125 inches
Amplier: 14.125 x 2.25 x 11 inches
Maximum output power (4ohm, 1kHz, 16V)(W) DSP Unit: 45 watts x 4 at 4 ohms
Amplier: 600 watts x 1 at 4 ohms
Mounting dimensions (WxHxD)(mm) DSP: 210.6 x 40 x 156.6
Amplier: 356.8 x 55 x 276.8
Preout impedance (ohms) 220
Preout output level (V) 2
Inputs and Outputs
12V Trigger Output(s) Power amplier turn on
Audio In High Level input connector
Digital Audio Input(s)
This unit can be connected to the following iPods. Update your iPod to the latest software before you
use it.
iPod Touch 3rd - 4th generation
iPhone 3GS
iPhone 4
If you have any questions or problems concerning your unit that are not covered in the owners
manual, consult your nearest Sony dealer.
RCA Audio Output(s) Front, Rear and Subwoofer RCA pre-amp outputs
Other Features
Card Remote ( ): Option RM-X251
Weights and Measurements

1. Works with iPod® touch 3rd-4th generation, iPhone® 3GS and iPhone 4.
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and is a trademark of Sony. iPod touch and iPhone are trademarks of Apple Inc. All other
trademarks are the property of their respective owners. Features and specications are subject to change without notice. Updated: September 9, 2011
Diameter (Approx.) Subwoofer: 12"
Dimensions (Approx.) DSP: 8.375 x 1.625 x 6.125 inches, 210.6 x 40 x 156.6 mm
Amplier: 14.125 x 2.25 x 11 inches, 356.8 x 55 x 276.8 mm
Weight (Approx.) DSP: .92 kg (2 lb. 1 oz.)
Amplier: 2.9 kg (6 lb. 7 oz.)
Supplied Accessories
Supplied Accessories
Parts for installation and connections (1 set)
RM-X251 wireless remote
XDP-MU100 DSP unit
XM-PK100D amplier
XS-PK120LC subwoofer
XA-C100IP Cradle