Sony CD Walkman D-E770 User manual

D-E770/EJ711/EJ715
US Model
D-EJ711/EJ715
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
D-EJ715
Tourist Model
D-E770
SERVICE MANUAL
PORTABLE CD PLAYER
MICROFILM
Model Name Using Similar Mechanism NEW
CD Mechanism Type CDM-3123EBA
Optical Pick-up Name DAX-23E
SPECIFICATIONS
Photo : D-EJ711
• Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
EE : East European model
FR : French model
G : German model
HK : Hong Kong model
JE : Tourist model
KR : Korea model
Ver 1.1 2000. 05

— 2 —
TABLE OF CONTENTS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINEWITH
MARK 0ON THE SCHEMATIC DIAGRAMS AND INTHE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
CAUTION
Use of controls or adjustments or performance of procedures
otherthanthosespecifiedherein may resultin hazardous radiation
exposure.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 °C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board. (within 3 times)
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
1. SERVICING NOTES····················································· 3
2. GENERAL ······································································· 4
3. DISASSEMBLY······························································ 5
3-1. Cabinet (Upper) ··································································· 5
3-2. CDM-3123EBA and Main Board ········································ 5
4. ELECTRICAL ADJUSTMENTS······························· 6
5. DIAGRAMS ····································································· 7
5-1. IC Pin Function Description ················································ 7
5-2. IC Block Diagrams ······························································ 9
5-3. Block Diagram··································································· 10
5-4. Printed Wiring Board ························································· 12
5-5. Schematic Diagram···························································· 15
6. EXPLODED VIEWS···················································· 18
6-1. Cabinet Section ·································································· 18
6-2. Main Section ······································································ 19
6-3. Mechanism Section (CDM-3123EBA)······························ 20
7. ELECTRICAL PARTS LIST ···································· 21

— 3 —
The laser diode in the optical pick-up block may suffer electro-
static breakdown because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
Befor Replacing the Optical Pick-Up Block
Please be sure to check thoroughly the parameters as par the “Op-
tical Pick-Up Block Checking Procedures” (Part No.: 9-960-027-
11) issued separately before replacing the optical pick-up block.
Note and specifications required to check are given below.
• FOK output: IC601 eg pin
When checking FOK, remove the lead wire to disc motor.
• RF signal P-to-P value: 0.35 to 0.65 Vp-p
Precautions for Checking Emission of Laser Diode
Laser light of the equipment is focused by the object lens in the
optical pick-up so that the light focuses on the reflection surface
of the disc. Therefore, be sure to keep your eyes more then 30 cm
apart from the object lens when you check the emission of laser
diode.
Laser Diode Checking Methods
During normal operation of the equipment, emission of the laser
diode is prohibited unless the upper lid is closed while turning ON
the S801. (push switch type)
The following two checking methods for the laser diode are oper-
able.
• Method:
Emission of the laser diode is visually checked.
1. Open the upper lid.
2. With a disc not set, turn on the S801 with a screwdriver having
a thin tip as shown in Fig.1.
Note: Do not push the detection lever strongly, or it may be bent or dam-
aged.
3. Press the u button.
4. Observing the objective lens, check that the laser diode emits
light.
When the laser diode does not emit light, automatic power
control circuit or optical pickup is faulty.
In this operation, the objective lens will move up and down 5
times along with inward motion for the focus search.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
Fig. 1 Method to push the S801
detection lever
detection lever
S801
main board
SECTION 1
SERVICING NOTES

— 4 —
SECTION 2
GENERAL This section is extracted
from instruction manual.

— 5 —
SECTION 3
DISASSEMBLY
3-1. CABINET (UPPER)
3-2. CDM-3123EBA AND MAIN BOARD
1 Five screws
(2
× 8)
3 Cabinet (upper)
(There are 7 claws.)
2 Open the lid, battery case.
Three claws
Three claws
Claw
S802
S803
Knob (AVLS)
Knob (JOG)
Knob (HOLD)
2 Two screws
1
3
CDM-3123EBA
4 Main board
(Be careful that S802 and S803
engage with the knob when
they are re-assembled.)
Note : Follow the disassembly procedure in the numerical order given.

— 6 —
SECTION 4
ELECTRICAL ADJUSTMENTS
The CD section adjustments are done automatically in this set.
In case of operation check, confirm that focus bias.
Precautions for Check
1. Perform check in the order given.
2. UseYEDS-18 disc (Part No.: 3-702-101-01) unless otherwise
indicated.
3. Power supply voltage requirement: DC4.5 V in DC IN jack.
VOLUME button: Minimum
AVLS switch : NORM
HOLD switch : OFF
Checking Location:
– MAIN board (Side A) –
Focus bias Check
Condition:
• Hold the set in horizontal state.
Connection:
Procedure:
1. Connect the oscilloscope to the test points TP629 (RF) and
TP635(AGND) on the MAIN board.
2. Set a disc. (YEDS-18)
3. Press the ubutton.
4. Check the oscilloscope waveform is as shown below.
A good eye pattern means that the diamond shape (◊) in the
center of the waveform can be clearly distinguished.
RF Signal reference Waveform (Eye Pattern)
VOLT/DIV : 100 mV (With the 10:1 probe in use)
TIME/DIV : 500 ns
To watch the eye pattern, set the oscilloscope to AC range and
increasethevertical sensitivity of the oscilloscope foreasy watch-
ing.
5. Stop revolving of the disc motor by pressing the xbutton.
oscilloscope
(AC range)
+
–
MAIN board
TP629 (RF)
TP635 (AGND)
2 k
Ω
RF level
0.35 to 0.65 Vp-p
TP629 (RF)
TP635 (AGND)

— 7 —
5-1. IC PIN FUNCTION DESCRIPTION
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50 —68
I/O
—
I/O
I
O
O
O
O
O
O
O
I
O
O
I
I
I
I
I
I
I
I
—
—
—
I
I
I
O
O
O
I
O
O
O
I
I
I/O
I
I
I
I
O
O
O
O
O
O
O
—
—
Pin Name
VSS
NC
FOK_1
AGCPWM_O
NC
NC
AMUTE_O
VCC2ON_O
XRST_O
SCK_O
MSDTI_I
MSDTO_O
WAKEUP_O
AD_SEL
AD_CHGMNT
AD_KEY2
AD_BATMNT
AD_KEY
AD_RMKEY
AD_DCINMNT
WP_OPEN
VREFL
VREFH
VDD
SCOR_I
GRSCOR_I
SPDL-MTR/FG_I
BEEP_O
NC
RMSCK_O
RMDATI_I
RMDATO_O
RMRW_O
RMRAT_O
WFCK_I
COMPON_I
SLVCD_I
AVLS_I
HOLD_I
BATDET_I
DSP_SEL_I
XHGON_I
XLAT_O
XSOE_O
VOL_LT_O
XPOWLT_O
XDOUTON_O
XAPC_OFF_O
NC
SEG14 —0
Description
Digital GND
—
FOK input
AGC PWM control (f=7.8kHz)
XWRE monitor (for debug purpose on)
XQOK monitor (for debug purpose on)
Analog mute on
VCC2 switching
System reset
Serial clock to CXD3027R
Serial input from CXD3027R
Serial output to CXD3027R
CXD3027R wake up
Mode selection
Charging monitor
Set key detection
Battery monitor
Lid key detection
Remocon key detection
DC-in monitor
Lid-open detection
Analog GND for A/D
Analog Vdd for A/D
Digital Vcpu
SCOR input
GRSCOR input
WFCK input
BEEP sound (2.06kHz, 50% duty)
—
Serial clock to CXD751
Serial input from CXD751
Serial output to CXD751
CXD751 readwrite selection
CXD751 serial data latch
—
G-protection selection
—
AVLS selection
HOLD selection
Bottom cell detection
“H”: CXD3027R, “L”: CXD3037R
Pick-up Vcc control
CXD3027R serial data latch
CXD3027R serial data output enable
Analog switch on when L/O inserted
TB2119F serial data latch
Digital out LED control
APC mute
—
LCD segment output
• IC801 TMP88CM22F (MICRO COMPUTER)
SECTION 5
DIAGRAMS

— 8 —
Pin No.
69
70
71
72
73
74
75
76
77
78
79
80
I/O
—
—
—
—
—
I
I
O
O
I
I
O
Pin Name
V3
V2
V1
C1
C0
STOP
TEST
SCSY_0
XBACKLIGHT_O
RESET_I
XIN
XOUT
Description
Charge pump C
Charge pump C
0.5Vcpu input
Charge pump C
Charge pump C
STOP mode release signal input
68k pull-down
External BB control
LCD backlight control
MCU reset input
Crystal input from CXD3027R
No connection

D-E770/EJ711/EJ715
5-2. IC BLOCK DIAGRAMS
IC351 TA2120FN
IC401 TB2119F
+ –
+ –
+ –
23 20 19 18 17 16 15 14 13
234 5 678910 11 12
1
24
BIAS BEEP
PW
SW
MT
SW
ALC
DET
ATT
SW
PWC
SW
OUT B OUT A
BEEP
IN
BST
PW
B
PW
C
BST
NF
ADD
OUT
RF IN PWC
SW
OUT B OUT C OUT A PWR
GND
MIX
OUT
ALC
IN
ALC
DET
ATT
SW
IN AIN BGND
MT
TC
MT
SW
PW
SW
BIAS
BIAS
IN
BST
SW
BST
OUT
VCC
ADD
A
ADD B
21
22
PW
A
ALC ALC
1 2 3 4 5 6 7 8 16 17 18 19 20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
4142434445464748495051525354555657585960
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
1514131211109
HPOUT2
HPOUT3
HPOUT1
APCREF VHP
HCND
RO4
FO4
RO3
RO2
RO1
FO3
FO2
FO1
FI1 RI1 FI2 RI2 RS RF4 DCIN VCPU VCC1 RSTB DTC2D DTC1D INM1 RF1 BATM2 BATM1 INP1 INM4 CHGSW CHGMNT
MGND4
MGND3
MGND2
MGND1
VD34
VD23
VD12
VLGO1
VLGO2
VLG3
L1L
L1H
L2H
L2L
L3
PGND1
PGND2
PGND3
VIN
INP3
INM3
RF3
RF21
DTC3
PAPC
VINDET
VREF
L4
VG
GND
SYNC
CLOCK
DATA
LATCH
HIPC
HPI2 HPI1
FR4
RI3
FI3
PWM4
STNG
N.C.
WAKE UP
RF2
INM2
PWM
H/P
DRIVER
H BRIDGE
DRIVER4
H BRIDGE
DRIVER3
H BRIDGE
DRIVER2
H BRIDGE
DRIVER1
CONTROLLER
CONTROLLER
LEVEL
SHIFTER
LEVEL
SHIFTER
CONTROL
CHARGE
SAW GEN
CLK
OR OSC
BIAS
INTERFACE
STNBY
REFERENCE
BANDGAP
REFERENCE
(VREF)
— 9 — — 10 — — 11 —
5-3. BLOCK DIAGRAM
OPTICAL PICK-UP
BLOCK
(DAX-23E)
RF
A
B
E
F
LD
VCC
GND
PD
VR
FOCUS
COIL
TRACKING
COIL
IC401(1/2)
MOTOR/COIL DRIVE
FO2
36
RO2
34
32
30
28
26
M
SLED
MOTOR
40
38
M
SPINDLE
M902
M901
MOTOR
F+
F-
T+
T-
43
FI2
44
RI2
12
13
14
15
41 SFDR
46
SMDS
44
C176
42
TRDR
49
TFDR
48
FRDR
51
FFDR
50
DIGITAL SIGNAL PROC.
D/A CONV.
IC601
DIGITAL SERVO
85
D OUT
RFAC
71
RFDC
58
A
62
B
61
E
59
97L OUT1
LINE OUT
(OPTICAL)
104L OUT2
23
SDTO
25
CLOK
24
XLAT
28
XSOE
26
SENS
17
SCOR
35
FOK
21XRST
X601
16.9MHz
30
R4M
Q501
AVDD
PAPC
78
VLG02
69
42 SRDR
47
7
SYNC
FO3
RO3
FI3
RI3
FO4
RO4
FI4
RI4
FO1
RO1
FI1
RI1
C+
C-
S+
S-
MDP
43
3
1
4
IC402
XTAO
94
XTAI
93
F
60
DIGITAL
OUT
OPTICAL
J301
REMOTE
J302
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION LR6)
2PCS. 3V
DC IN 4.5V
J401
IC301
109
106
7
.
2
1
.
111
.
9
12
15
.
19
21
.
8
.
24
25
2
3
.
.
.
BATT B+
BATT B-
114
XWE
120
XOE
119
XCAS
113
XRAS
XWE
4
XOE
22
XCAS
23
XRAS
5
118
117
116
115
.
.
.
A0
A10
A0
A10
D0
D3
IC602
16M DRAM
D0
D3
78
WDCK
83
WFCK
IC801
MICON
WP OPEN
21
AVLS
38
HOLD
93
COMPON
36
VCPU
OPEN
OFF
ON
S801
LIMIT
NORM
OFF
ON
AVLS
S802
HOLD
S803
G-PROTECTION
S804
SCK
10
MSDTO
12
XLAT
43
XSOE
44
MSDTI
11
SCOR
25
FOK
3
XIN
79
GRSCOR
26
WFCK
35
XRST
9
XPOWLT
46
SPDL MTR/FG
27
AD KEY
18
10
DATA
9
CLOCK
11
LATCH
13
AMUTE
47
XDOUT ON
14
AD SEL
7
AMUTE
45VOL LT
MUTE CONT
Q302
D601 MUTE
Q301
6
3
5
2
7
1
BIAS
28
BEEP
19
AD RMKEY
L IN
14
R IN
15 8
L OUT
IC351
HEADPHONE AMP
MUTE
18
BEEP
17
PWRSW
20
6
R OUT
7
VREF
+B SW
Q601
AVDD
TEST
TAP801
VCPU
32
RM DATO
IC802
TSB
SO
15
19TSB
31
RM DATI SI
14
30RM SCK SCK
16
34RM LAT XLT
17
33RM RW RW
18
MCLK
10
RESET
11
LCD
SWITCH UNIT
64
50
68
65
SEG0
SEG14
COM0
COM3
78
RESET
XHG ON
42
• Signal Path
: CD PLAY (ANALOG OUT)
: CD PLAY (OPTICAL OUT)
RECHARGEABLE
BATTERY
NH-DM2AA
2PCS. 2.4V
Q404
REG
Q412
Q402
D401
VCPU
DC DET
Q401,413
Q405
AVDD
48
RF4
51
VCC1
50
VCPU
61
VLGPO
47
INM4
49
DCIN
5
VG
59
BATM2
60
BATM1
65
VIN
80
VIN DET
2
L4
29
VD34
33
VD23
37
VD12
APC REF
79
BATT B-
D410
RS
46
CHG SW
45
RSTB
52
Q408
WAKEUP
SWITCH.
WAKEUP
8
DVDD
Q403
SWITCHING
Q406,407
8
VCC2 ON
71
L3
13
WAKEUP
4
AGC PWM
RF2
3
48
XAPC OFF
40
BAT DET
POWER CONTROL
IC401(2/2)
1
3
4
IC404
VCPU
20
DC INMNT
16

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
D-E770/EJ711/EJ715
5-4. PRINTEDWIRING BOARD
Note on Printed Wiring Board:
•X: parts extracted from the component side.
•Y: parts extracted from the conductor side.
•b: Pattern from the side which enables seeing.
Caution:
Pattern face side: Partsonthe pattern facesideseen from
(SIDE B) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(SIDE A) the parts face are indicated.
Ref. No. Location
D401 A-8
D404 A-7
D406 C-5
D409 A-5
D410 C-4
D461 C-10
D601 D-3
IC301 E-8
IC351 E-8
IC401 C-7
IC402 C-10
IC404 A-4
IC601 D-2
IC602 D-9
IC801 B-4
IC802 B-4
Q301 E-9
Q302 E-9
Q401 A-7
Q402 A-7
Q403 A-7
Q404 A-7
Q405 D-4
Q406 D-4
Q407 D-4
Q408 D-4
Q412 A-7
Q413 A-5
Q501 C-10
Q601 A-5
• Semiconductor
Location 12
A
B
C
D
E
34567891011
— 12 — — 13 — — 14 —

D-E770/EJ711/EJ715
— 15 — — 16 — — 17 —
5-5. SCHEMATIC DIAGRAM •Waveforms
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ωand 1/4W or less unless otherwise
specified.
•U: B+ Line.
• Power voltageisdc 4.5Vand fedwith regulateddcpower
supply from external power voltage jack.
• Voltages and waveforms are dc with respect to ground
under conditions in service mode.
no mark : CD PLAY
• Voltagesare takenwith aVOM(Inputimpedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J: CD PLAY (ANALOG OUT)
c: CD PLAY (OPTICAL OUT)
• Abbreviation
FR : French model
Note :
The components identified by
mark 0or dotted line with mark
0are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0sont critiques
pour la sécurité.
Ne les remplacer que par une
pièceportantlenumérospécifié.
1TP629 (RF) (PLAY MODE)
100 mV/DIV, 200 ns/DIV
2IC601 od (XTAI)
500 mV/DIV, 20 ns/DIV
3TP802 (R4M)
1 V/DIV, 100 ns/DIV
350 – 650 mVp-p
2.1 Vp-p
58.8 ns
3.4 Vp-p
237 ns
• Refer to page 9 for IC Block Diagrams. • Refer to page 7 for IC Pin Function Description.
• TOTAL CURRENT
PLAY : 160mA
STOP : 50mA
FF : 170mA
FR : 170mA
CXD3027R

— 18 — — 19 — — 20 —
6-1. CABINET SECTION
6-2. MAIN SECTION 6-3. MECHANISM SECTION
(CDM-3123EBA)
1 4-222-780-01 RING, COVER (E770/EJ715)
1 4-222-780-21 RING, COVER (EJ711)
2 4-222-778-01 WINDOW (LCD)
3 4-222-790-01 SPRING (POP UP)
4 4-222-775-01 LID, UPPER (WHITE)(E770)
4 4-222-775-11 LID, UPPER (PINK)(E770)
4 4-222-775-21 LID, UPPER (SILVER)(EJ715)
4 4-222-775-31 LID, UPPER (GRAY)(EJ715)
4 4-222-775-41 LID, UPPER (SILVER)(EJ711)
4 4-222-775-51 LID, UPPER (GRAY)(EJ711)
5 4-222-781-01 BUTTON (MODE)
6 4-222-788-01 BUTTON (SEARCH)
7 4-222-787-01 BUTTON (PLAY)
8 1-418-565-11 SWITCH UNIT
9 4-222-789-01 LID, COVER (WHITE)(E770)
9 4-222-789-11 LID, COVER (PINK)(E770)
9 4-222-789-21 LID, COVER (SILVER)(EJ711/EJ715)
9 4-222-789-31 LID, COVER (GRAY)(EJ711/EJ715)
10 3-375-114-31 SCREW
11 4-222-776-01 CABINET (UPPER)(LIGHT GRAY)(E770)
11 4-222-776-11 CABINET (UPPER)(DARK GRAY)(EJ711/EJ715)
12 4-222-792-01 LEVER, DETECTOR
13 4-222-793-01 KNOB(OPEN)
14 4-222-794-01 CLAW, LOCK
15 4-222-791-01 SPRING (OPEN)
16 4-222-764-01 BUTTON (VOLUME)
17 4-982-491-01 SCREW (2 ×8), TAPPING
#1 7-627-552-28 SCREW, PRECISION +P 1.7 ×2
51 4-222-765-01 INSULATOR
52 A-3323-357-A MAIN BOARD, COMPLETE (EXCEPT FR)
52 A-3323-358-A MAIN BOARD, COMPLETE (FR)
53 4-222-762-01 KNOB (JOG)(LIGHT GRAY)(E770)
53 4-222-762-11 KNOB (JOG)(DARK GRAY)(EJ711/EJ715)
54 4-222-766-01 TERMINAL (+), BATTERY
55 3-375-114-81 SCREW
56 4-993-131-31 KNOB (HOLD)(LIGHT GRAY)(E770)
56 4-993-131-41 KNOB (HOLD)(DARK GRAY)(EJ711/EJ715)
57 4-224-048-01 FOOT, RUBBER
58 4-222-768-01 TERMINAL (+.−), BATTERY
59 4-222-767-01 TERMINAL (−), BATTERY
60 4-222-769-01 LID, BATTERY CASE (LIGHT GRAY)(E770)
60 4-222-769-11 LID, BATTERY CASE (DARK GRAY)
(EJ711/EJ715)
61 4-222-777-01 CABINET (REAR) (LIGHT GRAY)(E770)
61 4-222-777-11 CABINET (REAR) (DARK GRAY)(EJ711/EJ715)
62 4-984-751-51 KNOB (AVLS) (LIGHT GRAY)(E770)
62 4-984-751-61 KNOB (AVLS) (DARK GRAY)(EJ711/EJ715)
101 3-318-203-71 SCREW (B1.7 ×5), TAPPING
102 4-218-820-01 CHASSIS
103 A-3328-628-A SCREW (FEED) ASSY
104 4-218-823-01 GEAR (B)
105 4-964-564-01 SCREW (M1.2 ×1.6)
106 4-218-821-01 COVER, GEAR
107 4-218-825-01 SPRING (SLED)
108 3-895-823-31 SCREW (B1.4 ×2.3), TAPPING
109 4-220-645-01 SHAFT, STANDARD
110 4-223-600-01 RACK
111 4-218-827-01 BRACKET (SHAFT)
112 3-686-458-03 SCREW (P1.4 ×3.5), TAPPING
0113 X-4952-506-1 OPTICAL PICK-UP (DAX-23E)
M901 A-3328-627-A MOTOR ASSY, SLED (WITH GEAR)
M902 A-3328-759-A MOTOR ASSY, TURN TABLE (SPINDLE)
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
SECTION 6
EXPLODEDVIEWS
NOTE:
• -XX, -X mean standardized parts, so they may
have some differences from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delayshould be anticipated when orderingthese
items.
• Themechanical parts withno reference number
in the exploded views are not supplied.
• Accessories and packing materials are given in
the last of this parts list.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑ ↑
Parts of Color Cabinet’s Color
• Abbreviation
FR : French model
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
The components identified by
mark 0or dotted line with mark
0are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0sont critiques
pour la sécurité.
Ne les remplacer que par une
pièceportantlenumérospécifié.
1
2
3
4
5
6711
8
9
10
12
not supplied
#1
#1
13 14 15
16
17
51
51
CDM-3123EBA
54 55
58
59
61
62
57
56
60
51
53
52
101
102
111
113
110
108
109
M901
104
105
107
106
101
103
112
M902
The components identified by mark 0or
dotted line with mark 0are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
Ver 1.1 2000. 05 Ver 1.1 2000. 05

— 21 —
SECTION 7
ELECTRICAL PARTS LIST
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
• -XX, -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delayshould be anticipated when orderingthese
items.
• CAPACITORS:
uF: µF
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• COILS
uH: µH
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
When indicating parts by reference number,
please include the board name.
The components identified by mark 0or
dotted line with mark 0are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
• Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
EE : East European model
FR : French model
G : German model
HK : Hong Kong model
KR : Korea model
A-3323-357-A MAIN BOARD, COMPLETE (EXCEPT FR)
*********************
A-3323-358-A MAIN BOARD, COMPLETE (FR)
*********************
1-791-471-11 WIRE
4-222-766-01 TERMINAL (+), BATTERY
< CAPACITOR >
C101 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C102 1-164-217-11 CERAMIC CHIP 150PF 5.00% 50V
C103 1-162-963-11 CERAMIC CHIP 680PF 10% 50V
C151 1-115-156-11 CERAMIC CHIP 1uF 10V
C154 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C155 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C201 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C202 1-164-217-11 CERAMIC CHIP 150PF 5.00% 50V
C203 1-162-963-11 CERAMIC CHIP 680PF 10% 50V
C251 1-115-156-11 CERAMIC CHIP 1uF 10V
C254 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C255 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C301 1-117-720-11 CERAMIC CHIP 4.7uF 10V
C302 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C312 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C313 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C351 1-115-156-11 CERAMIC CHIP 1uF 10V
C352 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C353 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C354 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C356 1-127-569-91 TANTAL. CHIP 100uF 20% 4V
C357 1-164-505-11 CERAMIC CHIP 2.2uF 16V
C401 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C402 1-164-505-11 CERAMIC CHIP 2.2uF 16V
C403 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C404 1-125-822-11 TANTALUM 10uF 20.00% 10V
C405 1-115-156-11 CERAMIC CHIP 1uF 10V
C406 1-110-569-11 TANTAL. CHIP 47uF 20.00% 6.3V
C407 1-162-965-11 CERAMIC CHIP 0.0015uF 10% 50V
C408 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C409 1-110-569-21 TANTAL. CHIP 47uF 20% 4V
C410 1-110-569-21 TANTAL. CHIP 47uF 20% 4V
C411 1-164-677-11 CERAMIC CHIP 0.033uF 10.00% 16V
C412 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C413 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C414 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C415 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C417 1-104-752-11 TANTAL. CHIP 33uF 20.00% 6.3V
C418 1-128-705-11 ELECT 0PF 0V
C420 1-110-569-21 TANTAL. CHIP 47uF 20% 4V
C421 1-110-569-21 TANTAL. CHIP 47uF 20% 4V
C422 1-125-838-91 CERAMIC CHIP 2.2uF 10% 6.3V
C423 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C424 1-165-112-11 CERAMIC CHIP 0.33uF 16V
C425 1-115-156-11 CERAMIC CHIP 1uF 10V
C426 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C427 1-104-847-11 TANTAL. CHIP 22uF 20.00% 4V
C428 1-104-847-11 TANTAL. CHIP 22uF 20.00% 4V
C431 1-104-752-11 TANTAL. CHIP 33uF 20.00% 6.3V
C432 1-104-752-11 TANTAL. CHIP 33uF 20.00% 6.3V
C433 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C435 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C442 1-115-156-11 CERAMIC CHIP 1uF 10V
C451 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C453 1-115-467-11 CERAMIC CHIP 0.22uF 10.00% 10V
C461 1-107-823-11 CERAMIC CHIP 0.47uF 10.00% 16V
C462 1-162-925-11 CERAMIC CHIP 68PF 5.00% 50V
C501 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C502 1-104-847-11 TANTAL. CHIP 22uF 20.00% 4V
C602 1-125-891-11 CERAMIC CHIP 0.47uF 10.00% 10V
C603 1-107-826-91 CERAMIC CHIP 0.1uF 10.00% 16V
C604 1-162-965-11 CERAMIC CHIP 0.0015uF 10% 50V
C605 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C606 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C607 1-125-891-11 CERAMIC CHIP 0.47uF 10.00% 10V
C609 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V
C611 1-162-917-11 CERAMIC CHIP 15PF 5% 50V
C612 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C613 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C614 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C615 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C620 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C621 1-163-189-00 CERAMIC CHIP 220PF 5.00% 50V
C622 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C623 1-115-156-11 CERAMIC CHIP 1uF 10V
C624 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C625 1-104-847-11 TANTAL. CHIP 22uF 20.00% 4V
C626 1-104-847-11 TANTAL. CHIP 22uF 20.00% 4V
C627 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C629 1-164-156-11 CERAMIC CHIP 0.1uF 25V
MAIN

Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
— 22 —
C630 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C631 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C632 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C634 1-127-569-91 TANTAL. CHIP 100uF 20% 4V
C635 1-115-156-11 CERAMIC CHIP 1uF 10V
C636 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C640 1-135-201-11 TANTALUM CHIP 10uF 20% 4V
C801 1-165-128-11 CERAMIC CHIP 0.22uF 16V
C802 1-165-128-11 CERAMIC CHIP 0.22uF 16V
C803 1-165-128-11 CERAMIC CHIP 0.22uF 16V
C804 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C805 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C806 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C807 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C808 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C809 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C810 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C811 1-117-720-11 CERAMIC CHIP 4.7uF 10V
C813 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C831 1-115-156-11 CERAMIC CHIP 1uF 10V
C841 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
< CONNECTOR >
*CN501 1-793-627-21 CONNECTOR (SMT) 13P
CN502 1-784-342-31 HOUSING, CONNECTOR 2P
CN503 1-784-342-21 HOUSING, CONNECTOR 2P
CN801 1-766-492-21 CONNECTOR, FFC/FPC (ZIF) 24P
< DIODE >
D401 8-719-067-42 DIODE MA2H735-(TX).SO
D404 8-719-067-42 DIODE MA2H735-(TX).SO
D406 8-719-071-87 DIODE MA785-(TX),SO
D409 8-719-976-96 DIODE DTZ4.7C
D410 8-719-072-70 DIODE MA2ZD14001S0
D461 8-719-072-70 DIODE MA2ZD14001S0
D601 8-719-044-74 DIODE MA792WK-TX
< FERRITE BEAD >
FB101 1-216-864-11 METAL CHIP 0 5% 1/16W
FB111 1-216-864-11 METAL CHIP 0 5% 1/16W
FB201 1-216-864-11 METAL CHIP 0 5% 1/16W
FB211 1-216-864-11 METAL CHIP 0 5% 1/16W
FB301 1-216-864-11 METAL CHIP 0 5% 1/16W
FB311 1-216-864-11 METAL CHIP 0 5% 1/16W
FB312 1-216-864-11 METAL CHIP 0 5% 1/16W
FB602 1-216-864-11 METAL CHIP 0 5% 1/16W
FB603 1-216-864-11 METAL CHIP 0 5% 1/16W
< IC >
IC301 8-759-488-29 IC TC7W66FU(TE12R)
IC351 8-759-522-87 IC TA2120FN(EL)
IC401 8-759-642-56 IC TB2119F
IC402 8-759-651-13 IC NJU7116F (TE2)
IC404 8-759-651-13 IC NJU7116F (TE2)
IC601 8-752-398-18 IC CXD3027R
IC602 8-759-498-44 IC MSM51V4400D-70TSK
IC801 8-759-649-82 IC TMP88CM22F-MIR1-2
IC802 8-752-397-55 IC CXD751-103R
< JACK >
J301 1-793-659-11 JACK, OPTICAL OUT (LINE OUT(OPTICAL))
J302 1-778-368-31 JACK, HEADPHONE (REMOTE)
J401 1-778-153-21 JACK,DC(POLARITY UNIFIED TYPE)
(DC IN 4.5V)
< COIL >
L311 1-414-754-11 INDUCTOR 10uH
L401 1-419-188-21 INDUCTOR 100uH
L402 1-414-754-11 INDUCTOR 10uH
L403 1-414-434-11 INDUCTOR 100uH
L404 1-414-757-11 INDUCTOR 100uH
L405 1-414-757-11 INDUCTOR 100uH
L406 1-414-404-11 INDUCTOR 100uH
L407 1-414-754-11 INDUCTOR 10uH
L408 1-414-404-11 INDUCTOR 100uH
L409 1-414-756-11 INDUCTOR 47uH
L410 1-414-756-11 INDUCTOR 47uH
L411 1-414-392-21 INDUCTOR 1uH
L412 1-414-392-21 INDUCTOR 1uH
L601 1-412-002-31 INDUCTOR CHIP 4.7uH
< TRANSISTOR >
Q301 8-729-043-90 TRANSISTOR IMX9T110
Q302 8-729-930-00 TRANSISTOR UMD2
Q401 8-729-050-17 TRANSISTOR 2SA1241-Y
Q402 8-729-920-82 TRANSISTOR 2SB1188-QR
Q403 8-729-921-73 TRANSISTOR 2SD1781K-QR
Q404 8-729-425-41 TRANSISTOR 2SK1374
Q405 8-729-047-36 TRANSISTOR CPH3303-TL
Q406 8-729-904-86 TRANSISTOR 2SB1197K-Q
Q407 8-729-029-14 TRANSISTOR DTC144EUA-T106
Q408 8-729-026-53 TRANSISTOR 2SA1576A-T106-QR
Q412 8-729-904-86 TRANSISTOR 2SB1197K-Q
Q413 8-729-429-44 TRANSISTOR XP1501
Q501 8-729-028-84 TRANSISTOR DTA124TUA-T106 (FR)
Q501 8-729-028-74 TRANSISTOR DTA114TUA-T106 (EXCEPT FR)
Q601 8-729-028-86 TRANSISTOR DTA143EUA-T106
< RESISTOR >
R1 1-216-295-91 SHORT 0
R2 1-216-295-91 SHORT 0
R3 1-216-295-91 SHORT 0
R4 1-216-295-91 SHORT 0
R5 1-216-295-91 SHORT 0
R101 1-216-813-11 METAL CHIP 220 5% 1/16W
R102 1-216-835-11 METAL CHIP 15K 5% 1/16W
R103 1-216-833-91 RES-CHIP 10K 5% 1/16W
R104 1-216-833-91 RES-CHIP 10K 5% 1/16W
R105 1-216-821-11 METAL CHIP 1K 5% 1/16W
R106 1-216-845-11 METAL CHIP 100K 5% 1/16W
R151 1-216-849-11 METAL CHIP 220K 5% 1/16W
R152 1-216-837-11 METAL CHIP 22K 5% 1/16W
R154 1-216-793-11 RES-CHIP 4.7 5% 1/16W
R155 1-216-821-11 METAL CHIP 1K 5% 1/16W
MAIN

Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
— 23 —
R156 1-216-843-11 METAL CHIP 68K 5% 1/16W
(FR)
R156 1-216-847-11 METAL CHIP 150K 5% 1/16W
(EXCEPT FR)
R201 1-216-813-11 METAL CHIP 220 5% 1/16W
R202 1-216-835-11 METAL CHIP 15K 5% 1/16W
R203 1-216-833-91 RES-CHIP 10K 5% 1/16W
R204 1-216-833-91 RES-CHIP 10K 5% 1/16W
R205 1-216-821-11 METAL CHIP 1K 5% 1/16W
R206 1-216-845-11 METAL CHIP 100K 5% 1/16W
R251 1-216-853-11 METAL CHIP 470K 5% 1/16W
(FR)
R251 1-216-849-11 METAL CHIP 220K 5% 1/16W
(EXCEPT FR)
R252 1-216-837-11 METAL CHIP 22K 5% 1/16W
R254 1-216-793-11 RES-CHIP 4.7 5% 1/16W
R255 1-216-821-11 METAL CHIP 1K 5% 1/16W
R256 1-216-843-11 METAL CHIP 68K 5% 1/16W
(FR)
R256 1-216-847-11 METAL CHIP 150K 5% 1/16W
(EXCEPT FR)
R301 1-216-841-11 METAL CHIP 47K 5% 1/16W
(FR)
R301 1-216-849-11 METAL CHIP 220K 5% 1/16W
(EXCEPT FR)
R302 1-216-845-11 METAL CHIP 100K 5% 1/16W
(FR)
R302 1-216-851-11 METAL CHIP 330K 5% 1/16W
(EXCEPT FR)
R315 1-218-871-11 METAL CHIP 10K 0.5% 1/16W
R316 1-216-821-11 METAL CHIP 1K 5% 1/16W
R317 1-216-821-11 METAL CHIP 1K 5% 1/16W
R352 1-216-864-11 METAL CHIP 0 5% 1/16W
R353 1-216-308-00 METAL CHIP 4.7 5% 1/10W
R401 1-216-861-11 METAL CHIP 2.2M 5% 1/16W
R402 1-216-833-91 RES-CHIP 10K 5% 1/16W
R403 1-216-853-11 METAL CHIP 470K 5% 1/16W
R404 1-216-864-11 METAL CHIP 0 5% 1/16W
R405 1-216-864-11 METAL CHIP 0 5% 1/16W
R406 1-216-864-11 METAL CHIP 0 5% 1/16W
R408 1-216-853-11 METAL CHIP 470K 5% 1/16W
R409 1-216-849-11 METAL CHIP 220K 5% 1/16W
R410 1-216-845-11 METAL CHIP 100K 5% 1/16W
R415 1-216-833-91 RES-CHIP 10K 5% 1/16W
R416 1-216-857-11 METAL CHIP 1M 5% 1/16W
R417 1-216-864-11 METAL CHIP 0 5% 1/16W
R418 1-218-895-11 METAL CHIP 100K 0.5% 1/16W
R419 1-218-903-11 METAL CHIP 220K 0.5% 1/16W
R420 1-216-864-11 METAL CHIP 0 5% 1/16W
R421 1-216-857-11 METAL CHIP 1M 5% 1/16W
R422 1-216-833-91 RES-CHIP 10K 5% 1/16W
R423 1-216-841-11 METAL CHIP 47K 5% 1/16W
R424 1-216-833-91 RES-CHIP 10K 5% 1/16W
R426 1-216-833-91 RES-CHIP 10K 5% 1/16W
R427 1-216-833-91 RES-CHIP 10K 5% 1/16W
R429 1-216-861-11 METAL CHIP 2.2M 5% 1/16W
R430 1-216-817-11 METAL CHIP 470 5% 1/16W
R431 1-216-864-11 METAL CHIP 0 5% 1/16W
R432 1-216-857-11 METAL CHIP 1M 5% 1/16W
R433 1-216-864-11 METAL CHIP 0 5% 1/16W
R434 1-218-899-11 METAL CHIP 150K 0.5% 1/16W
R435 1-218-887-11 METAL CHIP 47K 0.5% 1/16W
R436 1-216-864-11 METAL CHIP 0 5% 1/16W
R438 1-216-861-11 METAL CHIP 2.2M 5% 1/16W
R439 1-216-859-11 RES-CHIP 1.5M 5% 1/16W
R440 1-216-825-11 METAL CHIP 2.2K 5% 1/16W
R441 1-216-861-11 METAL CHIP 2.2M 5% 1/16W
R443 1-216-811-11 METAL CHIP 150 5% 1/16W
R444 1-216-817-11 METAL CHIP 470 5% 1/16W
R445 1-216-864-11 METAL CHIP 0 5% 1/16W
R446 1-216-821-11 METAL CHIP 1K 5% 1/16W
R447 1-216-304-11 METAL CHIP 3.3 5% 1/10W
R448 1-216-298-00 METAL CHIP 2.2 5% 1/10W
R449 1-216-298-00 METAL CHIP 2.2 5% 1/10W
R450 1-216-845-11 METAL CHIP 100K 5% 1/16W
R451 1-218-903-11 METAL CHIP 220K 0.5% 1/16W
R452 1-218-887-11 METAL CHIP 47K 0.5% 1/16W
R453 1-218-887-11 METAL CHIP 47K 0.5% 1/16W
R454 1-218-887-11 METAL CHIP 47K 0.5% 1/16W
R455 1-216-839-11 METAL CHIP 33K 5% 1/16W
R456 1-216-815-11 METAL CHIP 330 5% 1/16W
R461 1-218-895-11 METAL CHIP 100K 0.5% 1/16W
R462 1-218-887-11 METAL CHIP 47K 0.5% 1/16W
R463 1-216-857-11 METAL CHIP 1M 5% 1/16W
R465 1-216-864-11 METAL CHIP 0 5% 1/16W
R466 1-216-864-11 METAL CHIP 0 5% 1/16W
R471 1-216-864-11 METAL CHIP 0 5% 1/16W
R602 1-216-864-11 METAL CHIP 0 5% 1/16W
R603 1-216-851-11 METAL CHIP 330K 5% 1/16W
R604 1-216-857-11 METAL CHIP 1M 5% 1/16W
R605 1-216-827-11 METAL CHIP 3.3K 5% 1/16W
R606 1-216-827-11 METAL CHIP 3.3K 5% 1/16W
R607 1-216-833-91 RES-CHIP 10K 5% 1/16W
R608 1-216-845-11 METAL CHIP 100K 5% 1/16W
R609 1-216-833-91 RES-CHIP 10K 5% 1/16W
R610 1-216-864-11 METAL CHIP 0 5% 1/16W
R611 1-216-837-11 METAL CHIP 22K 5% 1/16W
R612 1-216-841-11 METAL CHIP 47K 5% 1/16W
R613 1-216-837-11 METAL CHIP 22K 5% 1/16W
R614 1-216-845-11 METAL CHIP 100K 5% 1/16W
R615 1-216-837-11 METAL CHIP 22K 5% 1/16W
R616 1-216-845-11 METAL CHIP 100K 5% 1/16W
R617 1-216-837-11 METAL CHIP 22K 5% 1/16W
R619 1-216-837-11 METAL CHIP 22K 5% 1/16W
R621 1-216-864-11 METAL CHIP 0 5% 1/16W
R622 1-216-864-11 METAL CHIP 0 5% 1/16W
R623 1-216-864-11 METAL CHIP 0 5% 1/16W
R624 1-216-845-11 METAL CHIP 100K 5% 1/16W
R625 1-216-833-91 RES-CHIP 10K 5% 1/16W
R626 1-216-864-11 METAL CHIP 0 5% 1/16W
R627 1-216-864-11 METAL CHIP 0 5% 1/16W
R628 1-216-864-11 METAL CHIP 0 5% 1/16W
R629 1-216-833-91 RES-CHIP 10K 5% 1/16W
R630 1-216-864-11 METAL CHIP 0 5% 1/16W
R632 1-216-839-11 METAL CHIP 33K 5% 1/16W
R633 1-216-805-11 METAL CHIP 47 5% 1/16W
R634 1-216-809-11 METAL CHIP 100 5% 1/16W
R636 1-216-864-11 METAL CHIP 0 5% 1/16W
R642 1-216-864-11 METAL CHIP 0 5% 1/16W
R644 1-216-864-11 METAL CHIP 0 5% 1/16W
MAIN

Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
— 24 —
R645 1-216-845-11 METAL CHIP 100K 5% 1/16W
R646 1-216-845-11 METAL CHIP 100K 5% 1/16W
R801 1-216-845-11 METAL CHIP 100K 5% 1/16W
R802 1-216-845-11 METAL CHIP 100K 5% 1/16W
R803 1-216-843-11 METAL CHIP 68K 5% 1/16W
R805 1-216-821-11 METAL CHIP 1K 5% 1/16W
R808 1-216-864-11 METAL CHIP 0 5% 1/16W
R809 1-216-845-11 METAL CHIP 100K 5% 1/16W
R810 1-216-864-11 METAL CHIP 0 5% 1/16W
R811 1-216-864-11 METAL CHIP 0 5% 1/16W
R812 1-216-864-11 METAL CHIP 0 5% 1/16W
R813 1-216-847-11 METAL CHIP 150K 5% 1/16W
(FR)
R813 1-216-839-11 METAL CHIP 33K 5% 1/16W
(EXCEPT FR)
R814 1-216-845-11 METAL CHIP 100K 5% 1/16W
R816 1-216-864-11 METAL CHIP 0 5% 1/16W
R819 1-216-843-11 METAL CHIP 68K 5% 1/16W
(FR)
R819 1-216-847-11 METAL CHIP 150K 5% 1/16W
(EXCEPT FR)
R820 1-216-864-11 METAL CHIP 0 5% 1/16W
R821 1-216-864-11 METAL CHIP 0 5% 1/16W
R823 1-216-833-91 RES-CHIP 10K 5% 1/16W
R824 1-216-833-91 RES-CHIP 10K 5% 1/16W
R825 1-216-864-11 METAL CHIP 0 5% 1/16W
R826 1-216-845-11 METAL CHIP 100K 5% 1/16W
R831 1-216-857-11 METAL CHIP 1M 5% 1/16W
R832 1-216-829-11 METAL CHIP 4.7K 5% 1/16W
R833 1-216-829-11 METAL CHIP 4.7K 5% 1/16W
R841 1-216-857-11 METAL CHIP 1M 5% 1/16W
R842 1-216-833-91 RES-CHIP 10K 5% 1/16W
R845 1-216-829-11 METAL CHIP 4.7K 5% 1/16W
R846 1-216-827-11 METAL CHIP 3.3K 5% 1/16W
< SWITCH >
S801 1-692-366-31 SWITCH, PUSH (1 KEY) (OPEN)
S802 1-762-078-11 SWITCH, SLIDE (AVLS)
S803 1-762-078-11 SWITCH, SLIDE (HOLD)
S804 1-762-078-11 SWITCH, SLIDE (G-PROTECTION)
S805 1-572-499-21 SWITCH, TACTIL (VOLUME +)
S806 1-572-499-21 SWITCH, TACTIL (VOLUME −)
< VARISTOR >
VDR101 1-801-862-11 VARISTOR, CHIP
VDR111 1-801-862-11 VARISTOR, CHIP
VDR201 1-801-862-11 VARISTOR, CHIP
VDR211 1-801-862-11 VARISTOR, CHIP
VDR311 1-801-862-11 VARISTOR, CHIP
VDR312 1-801-862-11 VARISTOR, CHIP
VDR313 1-801-862-11 VARISTOR, CHIP
< VIBRATOR >
X601 1-767-605-11 VIBRATOR, LITHIUM TANTALATE 16.9MHz
************************************************************
MISCELLANEOUS
**************
8 1-418-565-11 SWITCH UNIT
0113 X-4952-506-1 OPTICAL PICK-UP (DAX-23E)
M901 A-3328-627-A MOTOR ASSY, SLED (WITH GEAR)
M902 A-3328-759-A MOTOR ASSY, TURN TABLE (SPINDLE)
************************************************************
ACCESSORIES & PACKING MATERIALS
*******************************
1-418-670-11 REMOTE CONTROL UNIT (RM-CD6)(EJ715:US)
1-418-730-11 REMOTE CONTROL UNIT (RM-CD11L)
(EXCEPT EJ711/EJ715:US)
01-467-007-21 ADAPTOR, AC (AC-E455) (EJ715:AUS)
01-467-009-21 ADAPTOR, AC (AC-E455D)
(EJ711/EJ715:US,CND)
01-467-009-21 ADAPTOR, AC (AC-E455) (EJ715:US,CND)
01-467-195-11 ADAPTOR, AC (AC-E455A) (EJ711)
01-467-550-11 ADAPTOR, AC (AC-E455A) (E770/EJ715:E33)
01-473-115-11 ADAPTOR, AC (AC-E455D) (EJ715:UK)
01-473-116-35 ADAPTOR, AC (AC-E455D)
(EJ715:AEP,E13,EE,G,FR)
01-475-622-11 ADAPTOR, AC (AC-E455) (EJ715:CH)
01-475-623-11 ADAPTOR, AC (AC-E455) (EJ715:HK)
01-569-007-11 ADAPTOR, CONVERSION 2P (E770/EJ715:E33)
1-756-035-11 BATTERY PACK (NC-WMAA)
(E770/EJ715:AUS,CH,E13,E33,HK,KR)
1-756-035-21 BATTERY PACK (NC-WMAA)
(EJ715:AEP,UK,EE,G,FR)
1-756-035-31 BATTERY PACK (NC-WMAA) (EJ715:US,CND)
3-046-316-01 CASE, CARRYING (EJ711/EJ715:US)
3-046-317-01 POUCH, CARRYING
(E770/EJ715:AUS,CH,E13,E33,HK,KR)
3-046-668-11 MANUAL, INSTRUCTION (ENGLISH)
(EJ711/EJ715:US)
3-868-101-11 MANUAL, INSTRUCTION (SPANISH)
(E770/EJ715:AEP,E33)
3-868-101-21 MANUAL, INSTRUCTION (ENGLISH)
(E770/EJ715:CND,AEP,UK,AUS,E33,EE,FR)
3-868-101-31 MANUAL, INSTRUCTION (FRENCH)
(E770/EJ715:CND,AEP,FR)
3-868-101-41 MANUAL, INSTRUCTION (DUTCH)
(EJ715:AEP,EE)
3-868-101-51 MANUAL, INSTRUCTION (SWEDISH)
(EJ715:AEP)
3-868-101-61 MANUAL, INSTRUCTION (PORTUGUESE)
(EJ715:AEP)
3-868-101-71 MANUAL, INSTRUCTION (GERMAN)
(EJ715:AEP,G)
3-868-101-81 MANUAL, INSTRUCTION (ITALIAN)(EJ715:AEP)
3-868-101-91 MANUAL, INSTRUCTION (FINNISH)(EJ715:AEP)
3-868-102-11 MANUAL, INSTRUCTION (CHINESE)
(EJ715:E13,HK)
3-868-102-21 MANUAL, INSTRUCTION (ENGLISH)
(EJ715:CH,E13,HK)
3-868-102-31 MANUAL, INSTRUCTION (CHINESE)(EJ715:CH)
The components identified by
mark 0or dotted line with mark
0are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0sont critiques
pour la sécurité.
Ne les remplacer que par une
pièceportantlenumérospécifié.
MAIN

— 25 —
Ref. No. Part No. Description Remarks
3-868-103-11 MANUAL, INSTRUCTION (RUSSIAN)(EJ715:EE)
3-868-103-21 MANUAL, INSTRUCTION (CZECH)(EJ715:EE)
3-868-103-31 MANUAL, INSTRUCTION (HUNGARIAN)
(EJ715:EE)
3-868-103-41 MANUAL, INSTRUCTION (POLISH)(EJ715:EE)
3-868-103-51 MANUAL, INSTRUCTION (SLOVAK)(EJ715:EE)
3-868-103-61 MANUAL, INSTRUCTION (KOREAN)(EJ715:KR)
4-223-953-01 CASE (MIS), CARRYING (EJ715:KR)
4-224-787-01 CASE (MIR), CARRYING (EXCEPT EJ715:KR)
8-953-304-90 RECEIVER MDR-E805SP
(EXCEPT EJ711/EJ715:US)
8-953-342-93 HEADPHONE MDR-24 (EJ711)
8-953-774-90 RECEIVER, EAR MDR-G051SP (EJ715:US)

— 26 —
D-E770/EJ711/EJ715
Sony Corporation
Personal Audio Division Company 2000A1686-1
Printed in Japan ©2000.1
Published by General Engineering Dept.
9-927-629-11