Sony CDX-555RF User manual

© 2001 Sony Corporation
Operating Instructions
Mode d’emploi
Manual de instrucciones
CDX-555XRF
CDX-555RF
GB
Compact Disc Changer
System
Sistema de Cambiador de
discos compactos
FR
ES
For installation and connections, see the supplied installation/connections
manual.
En ce qui concerne l’installation et les connexions, consulter le manuel
d’installation/connexions fourni.
Con respecto a la instalación y a las conexiones, consulte el manual de
instalación/conexiones suministrado.
3-237-562-13 (1)
Owner’s Record
The model and serial numbers are located at the rear of the CD changer.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-555RF Serial No.
Downloaded from: https://www.usersmanualguide.com/

2
Welcome!
Thank you for purchasing the Sony CD
changer system. This unit lets you enjoy CD
sound with the changer.
The CDX-555XRF/555RF is a compact disc
changer system comprised of the wired and
wireless remote commanders, the relay box,
and the CD changer. The CD changer
modulates the audio signal into the RF (Radio
Frequency) signal so that it can be received by
the existing FM tuner of your car audio.
Therefore you will be able to enjoy CD play
with your car audio even if it has no input
terminals for a compact disc player.
•Compact and space saving CD changer for
vertical, horizontal, suspended, or inclined
installation in your car.
•Supplied wired remote enables you to
control the CD changer installed in the trunk
room of your car.
•Repeat play function for playing a track or a
disc repeatedly.
•Shuffle play function for playing tracks of
one disc or of all discs in random order.
•CD TEXT function*for displaying the CD
TEXT information on the display of the
supplied wired remote.
•D-BASS function for dynamic bass boot.
•Supplied wireless remote (RM-X81RF) which
can be operated almost like the wired remote
(RM-X80RF).
*Only available w hen playing back a CD TEXT disc
For the customers in the USA
(CDX-555RF only)
WARNING
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/
TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
Downloaded from: https://www.usersmanualguide.com/

3
Table of contents
Get ting Started
Resetting the unit ................................................. 4
Preparing the CD changer .................................. 4
Preparing the wireless remote............................ 5
Changing the transmitting frequency ............... 6
CD Changer
Listening to a CD ................................................. 6
Playing tracks in random order
—Shuffle Play ................................................. 7
Playing tracks repeatedly
—Repeat Play ................................................. 7
Labelling a CD
—Disc Memo .................................................. 8
Boosting the bass sound
—D-bass .......................................................... 9
Changing the output level .................................. 9
Additional Inf ormation
Precautions .......................................................... 10
Notes on handling discs .................................... 10
Maintenance ........................................................ 11
Location of controls ........................................... 12
Specifications ...................................................... 14
Troubleshooting guide ...................................... 15
Downloaded from: https://www.usersmanualguide.com/

4
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ball-point pen, etc.
Preparing the CD changer
1
x
Disc magazine
To remove
Z(EJECT)
Reset button
Push to unlock the door
Slide open
Tab
x
Labelled surface up
10 discs, one in each tray
With the arrow side facing up
Use the supplied disc magazine or the disc
magazine XA-250. The disc magazine XA-10B/
XA-350 cannot be used w ith this unit. If you
use any other disc magazine, it may cause a
malfunction.
2
Note
To prevent injury, do not insert your hand in t he
CD changer.
3
4
Downloaded from: https://www.usersmanualguide.com/

5
Preparing the w ireless
remote
M ounting the w ireless remot e
Use the supplied hook and loop fastener and
mount the wireless remote to a suitable
location where it will not interfere with your
driving.
Note
You cannot play 8cm (3in.) CDs.
If the disc magazine does not lock properly
Take out the disc magazine, press Z, and re-
insert it.
Use the unit w ith the door closed
completely
Otherwise, foreign matter may enter the unit
and contaminate the lenses inside the CD
changer.
Notes on the disc m agazine
•Do not leave the disc magazine in locations
with high temperature and high humidity,
such as on a car dashboard or in the rear
window where the disc magazine will be
subject to direct sunlight.
•Do not place more than one disc at a time
onto a tray, otherwise the CD changer and
the discs may be damaged.
•Do not drop the disc magazine or subject it to
a violent shock.
When t he tray comes out
Normally, the trays will not come out of the
disc magazine. However, if they are pulled out
of the disc magazine, it is easy to re-insert
them.
With the cut-aw ay portion of the tray facing you,
insert the right corner of the tray in the slot, then
push in the left corner until it clicks.
Note
Do not insert t he tray upside dow n or in t he
wrong direction.
to w here it is
going to be
mounted
Hook and
loop fastener
Downloaded from: https://www.usersmanualguide.com/

6
CD Changer
Listening to a CD
1Turn on the FM tuner of your car audio.
2Tune in the selected transmitting
frequency*w ith the FM tuner of your car
audio.
*The frequency of the unit is set to 88.3 M Hz
at the f act ory.
You can change the frequency. (See
“Changing the transmitting frequency”
above.)
3Press u.
CD playback starts.
4Adjust the volume w ith the volume
control on your car audio.
All the tracks play from the beginning.
St opping CD play
Press (OFF).
Notes
• When CD playback st ops, you may hear some
noise f rom the speakers. To prevent this f rom
happening, t urn the volume down bef ore
st opping CD playback.
• If you turn off the ignition sw itch of your car
wit hout stopping CD playback, it will
aut omatically resume CD playback f rom where it
was st opped w hen you turn on the ignit ion
sw itch again.
Locating a specific track
— Automatic M usic Sensor (AMS)
During CD playback, push dow n either
side of (AMS) once for each track you
w ish to skip.
Changing the transmitting
frequency
Because this unit processes CD playback
sound through an FM tuner, there may be
interference noise during CD playback. In such
a case, change the frequency of the modulated
RF signal transmitted from the unit. The initial
setting is 88.3 MHz.
1Press (SHUF/REP) for tw o seconds until
frequency appears.
2Press or repeatedly to
select the frequency.
Each time you press or ,
the frequency changes as follows:
:
88.3 MHz t89.9 MHz t89.7 MHz t
89.5 MHz t89.3 MHz t89.1 MHz t
88.9 MHz t88.7 MHz t88.5 MHz t
88.3 MHz
:
88.3 MHz t88.5 MHz t88.7 MHz t
88.9 MHz t89.1 MHz t89.3 MHz t
89.5 MHz t89.7 MHz t89.9 MHz t
88.3 MHz
3Press (SHUF/REP) for tw o seconds.
Using on the w ireless rem ote
1Press (SHUF) for tw o seconds until
frequency appears.
2Press or repeatedly to
select the frequency.
3Press (SHUF) for tw o seconds.
Notes
• When you change t he transmitt ing frequency on
the unit , be sure to tune your FM tuner t o t he
new ly selected one.
• Press uon t he wired remote bef ore changing
the f requency if t he pow er t o t he unit is turned
of f .
To locate
succeeding
tracks
To locate
previous
tracks
Downloaded from: https://www.usersmanualguide.com/

7
To search
forw ard
To search
backw ard
Locating a specif ic point in a t rack
— M anual Search
During CD playback, push dow n and
hold either side of (AMS). Release the
control w hen you have found the
desired point.
Locating a specific disc
— Disc Select
During CD playback, press or
once for each disc you w ish to
skip.
To locate succeeding discs
To locate previous discs
List ening t o t he radio or a tape
Be sure to stop CD playback before you start
listening to the radio or a tape.
Note
Be sure t o st op CD playback, otherwise there may
be some interf erence wit h radio reception.
Playing tracks in random
order — Shuffle Play
You can select:
•SHUF 1 to play the tracks on the current disc
in random order.
•SHUF 2 to play all the discs in random order.
Press (SHUF/REP) repeatedly until the
desired setting appears (SHUF 1 or
SHUF 2).
After five seconds, the shuffle play starts.
Each time you press (SHUF/REP), the
display changes as follows:
BSHUF 1 BSHUF 2 BREP 1*BREP 2*
Cancel (SHUF off) b
*These indications do not appear in operation
wit h the w ireless remot e.
To go back to the normal playback mode, press
(SHUF/REP) repeatedly until “SHUF” or
“REP” disappears.
Using on the w ireless rem ote
Press (SHUF) repeatedly until the desired
setting appears.
Playing tracks repeatedly
— Repeat Play
You can select:
•REP 1 to repeat the track.
•REP 2 to repeat the disc.
Press (SHUF/REP) repeatedly until the
desired setting appears (REP 1 or REP 2).
After five seconds, the repeat play starts.
Each time you press (SHUF/REP), the
display changes as follows:
BSHUF 1*BSHUF 2*BREP 1 BREP 2
Cancel (REP off) b
*These indications do not appear in operation
wit h the w ireless remot e.
To go back to the normal playback mode, press
(SHUF/REP) repeatedly until “REP” or
“SHUF” disappears.
Using on the w ireless rem ote
Press (REP) repeatedly until the desired
setting appears.
Downloaded from: https://www.usersmanualguide.com/

8
Labelling a CD — Disc Memo
(CD changer with custom file function)
You can label each disc with a personalised
label. Use the wireless remote to enter and
erase the characters.
1Press (DSPL/-EDIT) for tw o seconds until
the first character flashes.
2Input the characters.
1Press NAM E or to select the
desired characters.
(A tB tC t... Z t0 t1 t2 t
... 9 t+ t– t* t/ t\ t> t<
t. t_ t...)
Press NAME to display the available
characters. If you press NAME , the
characters will appear in reverse order.
If you wish to put a blank space after a
character, select “_” (under-bar).
An alternative method to erase a title
You can erase a t itle by selecting eight “ _” s
(under-bar).
2Press (ENTER/-DELETE) after locating
the desired character.
The next character flashes.
3Repeat steps 1and 2to enter the
entire title. Up to eight characters can
be entered per disc.
3To return to the normal CD playback
mode, press (DSPL/-EDIT) for tw o
seconds.
Displaying the disc mem o
Press (DSPL-SCRL) during CD playback.
Each time you press (DSPL-SCRL) during CD
playback, the display changes as follows:
BElapsed playback time BDisc name
Track name b
Using on the w ireless rem ote
Press (DSPL/-EDIT) to change the display.
Notes
• If a disc has not been assigned a personalised
label, " ********" or " NO NAME" w ill appear on
the display.
• The CD TEXT information appears only when a
CD TEXT disc is played back.
• If you use personalised labels, t hey will always
take priority over t he original CD TEXT
inf ormat ion when such information is displayed.
• “**WAIT**“ appears in t he display w hile t he
syst em is reading t he dat a.
• The system show s the CD TEXT information w ith
alphabetic characters, numbers, and symbols.
(The low ercase characters cont ained in the CD
TEXT disc are automatically converted to
uppercase.)
Erasing the disc m em o
1Play the CD and press (DSPL/-EDIT) for
tw o seconds.
2Press (ENTER/-DELETE) for tw o seconds
until DISC NAM E indication flashes.
3Press NAM E or to select the title
that you w ish to erase.
4Press (ENTER/-DELETE) to make DISC
NAM E indication and the disc name
flash.
5Press (ENTER/-DELETE) again.
The title is erased.
Repeat steps 2 through 4 if necessary.
6Press (DSPL/-EDIT) for tw o seconds.
The unit returns to the normal CD playback
mode.
Downloaded from: https://www.usersmanualguide.com/

9
Changing the output level
You can select the output level from the unit.
Normally the unit is used in the initial output
level; change the level if necessary.
1Press (SHUF/REP) for tw o seconds.
2Press (SHUF/REP) momentarily.
Initial setting
3Press or repeatedly to
select the output level.
To decrease the output level
: ,
To increase the output level
: ,
4Press (SHUF/REP) for tw o seconds.
Using on the w ireless rem ote
1Press (SHUF) for tw o seconds.
2Press (SHUF) again momentarily.
3Press or to select the
output level.
4Press (SHUF) for tw o seconds.
Note
When you select level 4 or 5, the CD playback
sound may be dist ort ed or you may hear some
noise. In such a case, select a lower out put level on
the unit and turn dow n t he overall volume on your
car audio.
Boosting the bass sound
— D-bass
You can enjoy a powerful bass sound. The D-
bass function boosts the low frequency signal.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS button.
0dB
D-BASS 2
D-BASS 1
Adjusting the bass curve
Press (D-BASS) repeatedly to select the
desired bass curve.
As the D-BASS number increases so does
the effect.
BD-BASS 1 BD-BASS 2
Cancel (D-BASS off) b
Notes
• Set ting t he out put level from 4 t o 5 w hile using
the D-bass function, t he amount of bass boost
decreases t o avoid dist ortion; however, it ’s not a
malf unction.
Adjust t he volume wit h your car audio.
• Selecting D-BASS 2, a distort ion may occur
depending on your CD.
Should t his occur, select D-BASS1 or t urn dow n
the output level.
Level
Frequency (Hz)
Downloaded from: https://www.usersmanualguide.com/

10
Notes on handling discs
A dirty or defective disc may cause sound
drop-outs during playback. To enjoy optimum
sound, handle the disc as follows.
Handle the disc by its edge, and to keep the
disc clean, do not touch the unlabelled surface.
Do not stick paper or tape on the disc.
Keep your discs in their cases or disc
magazines when not in use.
Do not expose discs to direct sunlight or heat
sources such as hot air-ducts. Do not leave
discs in a car parked in direct sunlight where
there can be a considerable rise in the
temperature inside the car.
Before playing, clean the discs with an
optional cleaning cloth. Wipe each disc in the
direction of the arrows.
Do not use solvents such as benzine, thinner,
commercially available cleaners or antistatic
spray intended for analog discs.
Discs with special shapes (heart-shaped discs,
octagonal discs etc.) cannot be played on this
unit. Attempting to do so may damage the
unit. Do not use such discs.
Not this w ay
This w ay
Not this w ay
This w ay
Additional
Information
Precautions
•This unit cannot be used with a car audio
without FM tuner.
•If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
•If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
•Avoid installing the CD changer, wireless
remote, and wired remote in places:
—subject to temperature exceeding 55°C
(131°F).
—subject to direct sunlight.
—near heat sources (such as heaters).
—exposed to rain or moisture.
—exposed to excessive dust or dirt.
—subject to excessive vibration.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
Downloaded from: https://www.usersmanualguide.com/

11
Notes on CD-R/CD-RW discs
You can play CD-Rs (recordable CDs)
designed for audio use on this unit.
Look for this mark to
distinguish CD-Rs for audio use.
This mark denotes that a
disc is not for audio use.
Some CD-Rs (depending on the equipment
used for its recording or the condition of
the disc) may not play on this unit.
You cannot play a CD-R that is not
finalized*.
You cannot play CD-RWs (rew ritable CDs).
*A process necessary for a recorded CD-R disc t o
be played on t he audio CD player.
M oist ure condensation
On a rainy day or in a very damp area,
moisture may condense on the lenses inside
the unit, and the unit will not operate
properly. In such a case, remove the disc
magazine and w ait for about an hour until
the moisture has evaporated.
M aintenance
Fuse replacement
If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Warning
Use the specified amperage fuse.
Use of a higher amperage fuse may cause
serious damage.
Notes on discs
If you use the discs explained below, the sticky
residue can cause the disc to stop spinning and
may cause malfunction or ruin your discs.
Do not use second-hand or rental CDs that
have a sticky residue on the surface (for
example, from peeled-off stickers or from ink,
or glue leaking from under the stickers).
There are paste residue.
Ink is sticky.
Do not use rental CDs with old labels that are
beginning to peel off.
Stickers that are beginning
to peel aw ay, leaving a
sticky residue.
Do not use your discs with labels or stickers
attached.
Labels are attached.
Do not use any discs w ith labels or stickers
attached.
The following malfunctions may result from
using such discs:
—Inability to eject a disc (due to a label or
sticker peeling off and jamming the eject
mechanism).
—Inability to read audio data correctly (e.g.,
playback skipping, or no playback) due to
heat shrinking of a sticker or label causing a
disc to warp.
—Damage to other discs in a disc magazine.
Downloaded from: https://www.usersmanualguide.com/

12
Location of controls
Wired remot e (RM-X80RF)
Refer to the pages for details.
1AM S (Automatic M usic Sensor/ manual
search) control 6, 7
2D-BASS indication 9
3REP (repeat play) indication
4SHUF (shuffle play) indication
5DISC NAM E (disc number/ disc name)
indication
The indicated disc number matches the
disc number in the disc magazine.
6TRACK NAM E (track number/ track
name) indication
7M IN (minute) indication
8SEC (second) indication
9DISC (disc select) buttons 6, 7, 9
0u(play/ pause) but ton 6
If pressed during CD playback, the CD
will pause. If pressed again, CD playback
will continue.
qa Infrared receptor for the w ireless
remote
qs Play/ pause indication
Turns around during CD playback and
flashes when the pause button is pressed.
qd OFF button 6
qf D-BASS button 9
qg DSPL-SCRL (indication change/ name
scroll) button 8
qh SHUF/ REP (shuf fle play/ repeat play/
control mode set) button 6, 7, 9
Downloaded from: https://www.usersmanualguide.com/

13
Wireless remote (RM-X81RF)
1NAM E (character select) buttons 8
2DSPL/ -EDIT (display/ name edit ) button
8
3AM S/ M ANU (Automatic M usic Sensor/
manual search) buttons
4D-BASS button 9
5REP (repeat play) button 7
6u(play/ pause) but ton 6
7ENTER/ -DELETE butt on 8
8DISC (disc select) buttons 6, 7, 9
9SCRL (scroll) button
0SHUF (shuffle play) button 6, 7, 9
qa OFF button 6
Lithium batt ery life
When the battery becomes weak, you will not
be able to operate the unit with the wireless
remote.
Battery life is approx. six months depending
on the conditions of use.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of
in fire.
Notes on the lithium battery
•Keep the lithium battery out of the reach of
children.
Should the battery be swallowed,
immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a
good contact.
•Be sure to observe the correct polarity when
installing the battery.
•Do not hold the battery with metallic
tweezers, otherwise a short circuit may
occur.
+ side up
x
Inst alling the battery
Replace the battery with a Sony CR2025 or
Duracell DL-2025 lithium battery. Use of
another battery may present a risk of fire or
explosion.
OFF
DISC
–
D–BASS
NAME
EDIT DELETE
DISC
+
REP
SHUF
DSPL
SCRL
ENTER
Downloaded from: https://www.usersmanualguide.com/

14
CD changer (CDX-555XRF/555RF)
System Compact disc digital audio
system
Transmitting frequency 88.3 MHz/88.5 MHz/
88.7 MHz/88.9 MHz/
89.1 MHz/89.3 MHz/
89.5 MHz/89.7 MHz/
89.9 MHz (switchable)
Input/output terminals Wired remote control
(8 pin)
RF signal (FM) output
Power input (3 pin)
Current drain 800 mA (at playback)
800 mA (at disc loading /
ejecting)
Operating temperature –10°C to +55°C
(14°F to 131°F)
Dimensions Approx. 262 ×90 ×185 mm
(10 3/8×3 5/8×7 3/8in.)
(w/h/d)
Mass Approx. 2.1 kg (4 lb. 10 oz.)
Relay box
Input/output Aerial input terminal
Aerial output cord
CD changer input cord
Dimensions Approx.
40 ×40 ×27 mm
(1 5/8×1 5/8×1 1/8in.)
(w/h/d)
Mass Approx. 140 g (5 oz.)
Specifications
Wired rem ote (RM -X80RF)
Dimensions Approx.
122 ×36.5 ×15.5 mm
(4 3/8×1 7/16 ×5/8in.)
(w/h/d)
Mass Approx. 255 g (9 oz.)
Wireless remot e (RM -X81RF)
Dimensions Approx.
52 ×8.5 ×90 mm
(2 1/16 ×3/8×3 9/16 in.)
(w/h/d)
Mass Approx. 30 g (1 oz.) not
incl. battery
Battery
Lithium battery (CR2025)
General
Power requirement 12 V DC car battery
(negative ground)
Supplied accessories Disc magazine (1)
Parts for installation and
connections (1 set)
Optional accessories Disc magazine XA-250
Design and specifications are subject t o change
wit hout notice.
Downloaded from: https://www.usersmanualguide.com/

15
Troubleshooting guide
The following checklist will assist in the correction of most problems which you may encounter
with your unit.
Before going through the checklist below, refer to the connection and operating procedures.
General
Cause/Solution
•The built-in micro computer has malfunctioned.
tPress the reset button of the CD changer.
•The connecting cords are not connected properly.
•The CD changer is installed in an unstable location.
tRe-install it in a stable location.
•The CD is dirty or defective.
tClean or replace it.
Take out the disc magazine, press Z, and re-insert the disc
magazine until it is locked securely.
Problem
The unit does not function.
The sound skips.
The disc magazine is not locked
in the CD changer.
Error displays
The following indication will flash for about five seconds.
If the solutions mentioned above do not help to improve the situation, consult your nearest Sony
dealer.
Display Cause
The disc magazine is not inserted in
the CD changer.
No CD is inserted in the disc
magazine.
The CD is dirty.
The CD is inserted upside down.
The CD changer cannot be operated
because of some problem.
One or more CDs from the CD
changer will not play because of
some problem.
Solution
Insert the disc magazine with CDs
into the CD changer.
Take out the disc magazine and
insert CDs.
Clean the CD.
Insert the CD correctly.
Press the reset button of the CD
changer.
Insert another CD.
Downloaded from: https://www.usersmanualguide.com/

2
Bienvenue!
Nous vous remercions d’avoir choisi le
système de changeur CD Sony. Cet appareil
vous permettra de bénéficier d’un son CD avec
le changeur.
Le CDX-555XRF/555RF est un système de
changeur de disques compacts comprenant
des télécommandes avec et sans fil, une boîte
de relais et un changeur CD. Le changeur CD
module le signal audio en signal RF (fréquence
radio) de sorte qu’il peut être capté par le
syntoniseur FM existant de votre autoradio.
Ainsi, vous pouvez écouter des disques
compacts en voiture même si votre autoradio
n’est pas équipé de bornes d’entrée pour
lecteur de CD.
•Changeur de CD compact et peu encombrant
pouvant être installé verticalement,
horizontalement, en suspension ou de
manière inclinée dans votre voiture.
•La télécommande filaire fournie vous permet
de commander le changeur CD installé dans
le coffre de votre voiture.
•Lecture répétée pour écouter plusieurs fois
une plage ou un disque.
•Lecture aléatoire pour écouter les plages
d’un disque ou de tous les disques dans un
ordre quelconque.
•La fonction*CD TEXT permettant d’afficher
les informations CD TEXT sur l’écran
d’affichage de la télécommande filaire
fournie.
•Fonction D-BASS pour une accentuation
dynamique du grave.
•La télécommande sans fil fournie (RM-
X81RF) s’utilise pratiquement de la même
façon que la télécommande filaire (RM-
X80RF).
*Uniquement disponible lors de la lecture d’un
disque CD TEXT
Downloaded from: https://www.usersmanualguide.com/

3
Table des matières
Préparat ion
Réinitialisation de l’appareil .............................. 4
Préparation du changeur CD ............................. 4
Préparation de la télécommande sans fil .......... 5
Changement de la fréquence de
transmission .................................................... 6
Changeur CD
Lecture de CD ....................................................... 6
Lecture des plages dans un ordre aléatoire
—Lecture aléatoire ......................................... 7
Lecture répétée des plages
—Lecture répétée ........................................... 7
Identification d’un CD
–Mémo de disque .......................................... 8
Renforcement des graves
—D-bass .......................................................... 9
Changement du niveau de sortie ....................... 9
Inf ormations complém ent aires
Précautions .......................................................... 10
Remarques sur la manipulation
des disques ..................................................... 10
Entretien .............................................................. 11
Nomenclature ..................................................... 12
Spécifications ...................................................... 14
Guide de dépannage ......................................... 15
Downloaded from: https://www.usersmanualguide.com/

4
2
Remarque
Pour évit er t out e blessure, ne pas introduire la
main dans le changeur de CD.
3
4
Préparation
Réinitialisation de
l’appareil
Avant la première mise en service de cet
appareil ou après avoir remplacé la batterie de
la voiture, vous devez réinitialiser l’appareil.
Appuyez sur la touche de réinitialisation à
l’aide d’un objet pointu comme un stylo à bille,
etc.
Préparation du changeur
CD
1
x
Chargeur de
disques
Pour enlever
Z(EJECT)
Touche de
réinitialisation
Déverrouiller
Relâchez et coulissez pour ouvrir
Onglet
x
Face imprimée vers le haut
10 disques, un par plateau
Avec le côtéportant la flèche
orientévers le haut
Utilisez le chargeur de disques fourni ou un
chargeur de disques XA-250. Vous ne pouvez
pas utiliser de chargeur de disques XA-10B/ XA-
350 avec cet appareil. L’utilisation d’un autre
chargeur de disques risque de provoquer un
dysfonctionnement.
Downloaded from: https://www.usersmanualguide.com/

5
Préparation de la
télécommande sans fil
M ont age de la t élécommande sans
fil
Utilisez les bandes Velcro fournies pour
monter la télécommande sans fil dans un
endroit qui ne risque pas de gêner la conduite.
Remarque
Vous ne pouvez pas écout er de CD de 8 cm
(3 po.).
Si le chargeur de disques n’est pas encastré
correctement
Sortez-le et après avoir appuyé sur Z,
réinsérez-le.
Utilisez cet appareil avec la trappe fermée
Sinon, des corps étrangers pourraient pénétrer
dans l’appareil et encrasser les lentilles dans le
changeur CD.
Remarques sur le chargeur de
disques
•Ne laissez pas le chargeur de disques dans
un endroit très chaud ou très humide comme
sur le tableau de bord ou sur la plage arrière
de la voiture où il serait en plein soleil.
•Ne placez pas plus d’un disque à la fois par
plateau, car vous risquez sinon
d’endommager le changeur CD et les
disques.
•Ne laissez pas tomber le chargeur de disques
et évitez de le cogner.
Si un plat eau s’enlève
En principe, les plateaux ne s’enlèvent pas du
chargeur. S’ils s’enlèvent du chargeur, il est
cependant facile de les y réintroduire.
L’encoche du plateau étant face àvous,
introduisez l’angle droit du plateau dans la fente
et poussez ensuite sur l’angle gauche jusqu’à ce
qu’il s’encliquette.
Remarque
N’int roduisez pas le plateau à l’envers ni dans le
mauvais sens.
Vers la surface
de montage
Bandes Velcro
Downloaded from: https://www.usersmanualguide.com/

6
Changeur CD
Lecture de CD
1Allumez le syntoniseur FM de votre
autoradio.
2Syntonisez la fréquence*de transmission
sélectionnée avec le syntoniseur FM de
votre autoradio.
*La fréquence de l’appareil est réglée par
déf aut sur 88,3 M Hz.
Vous pouvez changer la fréquence. (Voir
“Changement de la fréquence de
transmission” ci-dessus.)
3Appuyez sur u.
La lecture du CD commence.
4Réglez le volume àl’aide de la
commande de volume de votre
autoradio.
Toutes les plages commencent au début.
Arrêt de la lecture CD
Appuyez sur (OFF).
Remarques
•Lorsque la lecture du CD est arrêtée, il est
possible que les haut-parleurs émett ent un
certain bruit . Afin d’éviter que ce phénomène ne
se produise, baissez le volume avant d’arrêt er la
lecture du CD.
•Si vous coupez le contact de votre voiture sans
avoir arrêté la lecture du CD, celle-ci reprendra
aut omatiquement là oùelle a ét é interrompue
lorsque vous remett rez le contact.
Localisation d’une plage
déterminée
— Détecteur automatique de musique (AM S)
En cours de lecture du CD, appuyez une
fois sur l’un des deux côtés de la touche
(AMS) pour chaque plage que vous
voulez sauter.
Changement de la
fréquence de transmission
Comme cet appareil traite le son de lecture CD
via un syntoniseur FM, il se peut qu’il y ait des
interférences durant la lecture du CD. En
pareil cas, changez la fréquence du signal RF
modulé transmis par l’appareil. Le réglage
initial est de 88,3 MHz.
1Appuyez sur (SHUF/REP) pendant deux
secondes jusqu’à ce que la fréquence
apparaisse.
2Appuyez plusieurs fois de suite sur
ou pour sélectionner la
fréquence.
Chaque fois que vous appuyez sur
ou , la fréquence change comme
suit :
:
88,3 MHz t89,9 MHz t89,7 MHz t
89,5 MHz t89,3 MHz t89,1 MHz t
88,9 MHz t88,7 MHz t88,5 MHz t
88,3 MHz
:
88,3 MHz t88,5 MHz t88,7 MHz t
88,9 MHz t89,1 MHz t89,3 MHz t
89,5 MHz t89,7 MHz t89,9 MHz t
88,3 MHz
3Appuyez sur (SHUF/REP) pendant deux
secondes.
Utilisat ion de la t élécommande sans
fil
1Appuyez sur (SHUF) pendant deux
secondes jusqu’à ce que la fréquence
apparaisse.
2Appuyez sur ou pour
sélectionner la fréquence.
3Appuyez sur (SHUF) pendant deux
secondes.
Remarques
•Si vous changez la f réquence de t ransmission de
l’appareil, n’oubliez pas de syntoniser votre
syntoniseur FM sur la nouvelle fréquence
sélect ionnée.
• Appuyez sur la touche ude la télécommande
filaire avant de changer la fréquence si l’appareil
n’est pas sous t ension.
Pour localiser
les plages
suivantes
Pour localiser
les plages
précédentes
Downloaded from: https://www.usersmanualguide.com/