Sony PCG-SRX99K VAIO User Guide (primary manual) User manual

Welcome
Congratulations on your purchase of this Sony VAIO®computer, and welcome to the online VAIO®Computer User Guide.
This user guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions to
preinstalled software programs.
In the left navigation window, click the topics you want to learn more about, and that information will be displayed in this
main window.
View the Electronic Flyer, which provides updates and supplemental information about your computer.
Page 1

Powering Your Computer
Your VAIO®computer comes with a battery and an AC adapter. This chapter explains how to install and use these supplied
accessories to power your computer. It also describes ways you can efficiently utilize the battery as a power source.
Using AC Power
Using the Battery
Conserving Battery Power
Page 2

Using AC Power
The supplied battery is not charged when you receive your computer. To use your computer immediately, use the supplied
AC adapter as the power source. The computer charges the battery while you use AC power. See Using the Battery for
more information on installing and using your battery.
Connecting the AC adapter
Turning on the computer
Page 3

Connecting the AC adapter
To connect the AC adapter
1. Plug the cable attached to the AC adapter into the DC IN port on your computer or docking station.
Connecting the AC Adapter to the Computer
2. Plug one end of the power cord into the AC adapter, and plug the other end into an AC outlet.
Use only the supplied AC adapter with your computer.
Page 4

Turning on the computer
To turn on the computer
1. Slide the release lever to the right, and lift the cover while holding the bottom of the computer firmly.
Opening the Computer
2. Press the power button until the power indicator turns on.
Turning on the Computer
If you hold the power button down, the computer turns off.
3. If necessary, adjust the brightness controls for the LCD display as follows:
To increase light intensity, press Fn+F5 and then or .
To decrease light intensity, press Fn+F5 and then or .
Page 5

Using the Battery
A battery is an auxiliary power source you can use when your computer is not plugged into an AC outlet. Your computer
may come equipped with one or two battery bays, depending on the model you purchased. If your computer comes with
two battery bays, you can purchase a second rechargeable battery to extend your computing time. Regardless how many
batteries you use, you can always extend the life of the battery by conserving power. See Conserving Battery Power for
more information.
Inserting a battery
Removing a battery
Displaying battery information
Charging a battery
Notes on batteries
Frequently asked questions
The battery that comes with your computer is not fully charged at the time of purchase.
Page 6

Inserting a battery
To insert a battery
1. Turn the computer over, and slide the LOCK/UNLOCK switch on the bottom of the computer to the UNLOCK
position.
2. Align the grooves and tabs on the battery with those on the back of the computer.
Inserting a Battery
3. Slide the battery into the computer until it clicks into place.
4. Slide the LOCK/UNLOCK switch into the LOCK position.
If the port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the
computer with the port replicator attached could cause a temporary loss of power.
Some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a
program that prevents the system from entering Hibernate mode, save your data frequently. See Using power saving
modes for information on how you can manually activate a power saving mode.
Page 7

Removing a battery
If you are not using the computer for an extended period of time, remove the battery from the computer to avoid damaging
the battery. You can remove the battery when the computer is on or off.
If the computer is on, connect the AC adapter and exit a power saving mode before you remove the battery.
To remove a battery
1. Turn the computer over, and slide the LOCK/UNLOCK switch on the bottom of the computer to the UNLOCK
position.
2. Slide the battery away from the computer.
Remov ing a Battery
Page 8

Displaying battery information
You can display the remaining battery charge on the Battery Information toolbar and/or the Battery Information window.
To display the Battery Information toolbar
1. Right-click the center of the Windows®taskbar.
2. Select Toolbars from the shortcut menu, and click Battery Information. The Battery Information toolbar
appears on the taskbar.
If the Battery Information toolbar is hidden behind the taskbar icons, click and drag the edge of the Battery
Information toolbar to the left until it is in clear view.
The total charge remaining in the battery is listed in percent and real-time values. The following toolbar indicates that there
is 72 percent or approximately 1 hour and 11 minutes of battery charge left.
Battery Information Toolbar
Percentage indicator —Displays the percentage of the remaining capacity.
Time indicator —Displays estimated time (hours : minutes) remaining before the battery fully discharges, also
known as the time-to-empty.
To close the Battery Information toolbar
1. Right-click the Battery Information toolbar.
2. Select Toolbars from the shortcut menu, and click to cancel Battery Information. The Battery Information
toolbar disappears from the toolbar.
To display the Battery Information window
The battery icons that appear on the Battery Information toolbar and the Battery Information window indicate the
current status of the installed battery.
Battery icon Battery status
Charging
Fully charged
Discharging
No battery
1. Double-click the Battery icon on the Windows taskbar. The Battery Information window appears.
Battery Information Window
Page 9

Battery tab —Displays the total charge remaining in the battery. You can click Advanced for specific
information on the battery.
Alarms tab —Displays the alarm settings, which notify you when the battery is fully charged and is too
low. You can change your computer's alarm settings on this window.
Click Help in the lower right corner of the window for more information.
Page 10