Sony Cyber-shot DCS-S980 User manual

Revision History
Revision History
Sony EMCS Co.
DSC-S980
SERVICE MANUAL
Link
SERVICE NOTE
SPECIFICATIONS
BLOCK DIAGRAM
DISASSEMBLY REPAIR PARTS LIST
Link
Internal memory
ON BOARD
Internal memory
ON BOARD
Ver. 1.0 2009.01
2009A0500-1
© 2009.1
Published by Kohda TEC9-852-650-11
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Korea Model
The components identified by
mark 0or dotted line with
mark 0are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Photo: Silver
DIGITAL STILL CAMERA
DSC-S980
In case of the CCD assy or main board failure, contact your local Sony
Service Headquarter for the measures.
All manuals and user guides at all-guides.com

— 2 —
DSC-S980
SPECIFICATIONS
Camera
[System]
Image device:
7.79 mm (1/2.3 type) color CCD, Primary
color filter
Total pixel number of camera:
Approx. 12.4 Megapixels
Effective pixel number of camera:
Approx. 12.1 Megapixels
Lens: 4× zoom lens f = 5.8 – 23.2 mm (33 –
132mm (35 mm film equivalent)) F2.5 (W) –
5.6 (T)
Exposure control: Automatic exposure, Scene
Selection (7 modes)
White balance: Automatic, Daylight, Cloudy,
Fluorescent 1, 2, 3, Incandescent, Flash
File format (DCF compliant):
Still images: Exif Ver. 2.21 JPEG compliant,
DPOF compatible
Movies: AVI (Motion JPEG)
Recording media: Internal Memory (approx.
12 MB), “Memory Stick Duo” media
Flash: Flash range (ISO sensitivity
(Recommended Exposure Index) set to Auto):
approx. 0.5 to 3.5 m (1 feet 7 3/4 inches to
11 feet 5 7/8 inches) (W)/approx. 0.5 to 1.5 m
(1 feet 7 3/4 inches to 4 feet 11 1/8 inches) (T)
Recording interval of Burst:
Approx. 1.0 seconds
[Input and Output connectors]
(USB)•A/V OUT terminal:
Video, Audio (Monaural), USB
communication
USB communication:
Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD panel: 6.7 cm (2.7 type) TFT drive
Total number of dots: 230 400 (960×240) dots
[Power, general]
Power: Rechargeable battery pack NP-BK1, 3.6 V
AC-LS5K AC Adaptor (sold separately),
4.2 V
Power consumption (during shooting):
1.2 W
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to +140°F)
Dimensions: 93.1×55.7×23.8 mm (3 3/4×
2 1/4×15/16 inches) (W/H/D, excluding
protrusions)
Mass: Approx. 157 g (5.5 oz) (including NP-BK1
battery pack and strap, etc.)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
BC-CSK/BC-CSKA battery charger
Power requirements: AC 100 V to 240 V, 50/
60 Hz, 2.2 W (BC-CSK)/2.3 W (BC-CSKA)
Output voltage: DC 4.2 V, 0.33 A (BC-CSK)/
0.30 A (BC-CSKA)
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to +140°F)
Dimensions: Approx. 62×24×91 mm (2 1/2×
31/32×3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz) (BC-CSK)/Approx.
70 g (2.5 oz) (BC-CSKA)
Rechargeable battery pack NP-
BK1
Used battery: Lithium-ion battery
Maximum output voltage: DC 4.2 V
Mean output voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.4 A
Capacity: Approx. 3.4 Wh (970 mAh)
Design and specifications are subject to change
without notice.
PictBridge: Compatible
All manuals and user guides at all-guides.com

— 3 —
DSC-S980
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINE WITH
MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
•Keep the temperature of the soldering iron around 270˚C
during repairing.
•Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
•Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
•Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
All manuals and user guides at all-guides.com

1-1E
DSC-S980
1-1. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: When replacing the camera, erase the data in internal memory of the board before replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
1. SERVICE NOTE
Copies all images in the internal memory to “Memory Stick Duo” media.
1Insert “Memory Stick Duo” media having sufficient free capacity.
2Select [Copy] with v/Von the control button, then press z.
The message “All data on internal memory will be copied” appears.
3Select [OK] with v, then press z.
Copying starts.
To c a n c e l copying
Select [Cancel] in step 3, then press z.
•Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
•You cannot select images to copy.
•The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” media after copying, then format the internal memory
([Format] in [Internal Memory Tool]).
•Anew folder is created on the “Memory Stick Duo” media and all the data will be copied to it. You cannot
choose a specific folder and copy images to it.
•The (Print order) marks on the images are not copied.
Copy
Fo
This item does not appear when “Memory Stick Duo” media is inserted in the camera.
rmats the internal memory.
•Note that formatting permanently erases all data in the internal memory, including even protected images.
1Select [Format] with v/Von the control button, then press z.
The message “All data on internal memory will be erased” appears.
2Select [OK] with v, then press z.
Formatting starts.
To c ancel formatting
Select [Cancel] in step 2, then press z.
Format
All manuals and user guides at all-guides.com

2-1
DSC-S980
2. DISASSEMBLY
The following flow chart shows the disassembly procedure.
2-1. DISASSEMBLY
(To page 2-2)
1
1
3
3
4
1
2
2
1
2
2
2
3
34
3
5
1 LCD
2 SCREW_TP_1.4_3_A_0.2_D=2.5
3 LCD BRACKET
1 SCREW_TP_1.4_3_A_0.2_D=2.5
2 JACK COVER ASSY
3 SCREW TP 1.4 ∗ 2.5
4 CABINET (FRONT) ASSY
5 BT LID
1 SCREW_TP_1.7_3.7_A0.4_D3_N
2 CABINET (REAR) ASSY
1 SCREW_TP_1.7_3.7_A0.4_D3_N
2 MIDDLE BELT (L)
3 SCREW_TP_1.7_3.7_A0.4_D3_N
4 MIDDLE BELT (R)
All manuals and user guides at all-guides.com

2-2E
DSC-S980
1
1
2
1
1
2
3
42
3
2
3
4
(From page 2-1)
1 SCREW_TP_1.4_3_A_0.2_D=2.5
2 CCD PLATE SHEET
3 CCD ASSY
4 LOW PASS FILTER SET
1 SCREW_TP_1.4_3.5_A0.3_D2.5_N
2 LENS BLOCK ASSY
3 MAIN FRAME SUB ASSY
1 SCREW_TP_1.4_3_A_0.2_D=2.5
2 CABINET (UPPER) ASSY
3 SCREW_TP_1.4_3_A_0.2_D=2.5
4 ST BLOCK ASSY
1 SCREW_TP_1.4_3.5_A0.3_D2.5_N
2 MAIN BOARD
HELP01
HELP02
HELP01
HELP02
Note: High-voltage cautions
Discharging the Capacitor
Short-circuit between two points
with the short jig about 10 seconds.
R:1 kΩ/1 W
(Part code: 1-215-869-11)
Peel off the sheet
All manuals and user guides at all-guides.com

DSC-S980
HELP
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
HELP01
Be careful about the Lens Assy
Be careful of the weld
Keep clean these Pins.
Don't press the Barrier part.
Don't press the Sensor holder
Don't press the AF motor
HELP02
All manuals and user guides at all-guides.com

3-1E
DSC-S980
3. BLOCK DIAGRAM
3-1. OVERALL BLOCK DIAGRAM
CCD[0..11]
PXCLK
CCD_VD
CCD_HD
AFE_SCK
AFE_SDA
TG_EN
LCD[0..7]
LCD_CLK
LCD_HD
LCD_VD
FOCUS0
FOCUS3
FOCUS2
FOCUS1
SHUTER1
SHUTER0
LENS_RST
LENS_SCLK
LENS_SDATA
KEY_PLAYBACK
MODE_SW
LENS_EN
SCLK
SDATA
KEY_TELE
KEY_WIDE
PWR_KEY
ZOOM_PI
ZOOM_PR
FOCUS_PI
MSDATA[0..3]
MS_CLK
MS_INS
MS_BS
MS_PWON
+3.1VD
+3.1VD
+3.3V
+3.1VD
DGND
DGND
DGND
DGND
DGND
+3.1VD
+13V
LCD_EN
TG_ON
AFE_RST
AUDIO_OUT
VIDEO_OUT
MIC_IN
-7.5V
USB_D+
USB_D-
USB_DET
A/V_DET
LCD_BL-
LCD_BL+
STROBE_CHG
STROBE_TRG
+1.2VD
+1.8VD
DGND
FLASH_VP
VP
+13V
-7.5V
+3.1VD
+3.3V
+4.3VM
LCD_ON
CCD_ON
BAT_AD
PWR_CTRL
LCD_BL-
LCD_BL+
USB_D+
USB_D-
USB_DET
A/V_DET
MIC_IN
+3.3VS
+3.3VS
+1.2VD
+1.8VD
AUDIO_OUT
VIDEO_OUT
MEM_LDQS
MEM_LDM
MEM_BA0
MEM_BA1
MEM_UDM
MEM_A[0..12]
MEM_CK
MEM_CKN
MEM_CKE
MEM_D[0..15]
MEM_UDQS
MEM_RAS
MEM_CAS
MEM_WE
MEM_CS
MFD_RDY
MFD_RE
MFD_WE
MFD_ALE
MFD_CE
MFD_WP
MFD_CLE
MFD[0..7]
+3.1VD
+1.8VD
DGND
LCD_ON
CCD_ON
PWR_CTRL
AFE_RST
CCD[0..11]
PXCLK
CCD_VD
CCD_HD
SCLK
SDATA
TG_EN
BAT_AD
TG_ON
LCD_HD
LCD_VD
LCD[0..7]
LCD_CLK
LCD_EN
LENS_EN
LENS_RST
ZOOM_PR
FOCUS_PI
ZOOM_PI
SHUT1
SHUT2
STA_LED
SHUTER[0..1]
FOCUS[0..3]
SHUTER[0..1]
FOCUS[0..3]
MFD_RDY
MFD_RE
MFD_WE
MFD_ALE
MFD_CE
MFD_WP
MFD_CLE
MFD[0..7]
AFE_SCK
AFE_SDA
ICE_S[0..2]
ICE_D[0..3]
ICE_S0
ICE_S1
ICE_S2
ICE_D0
ICE_D1
ICE_D2
ICE_D3
ICE_CLK
ICE_Break
ICE_CLK
ICE_Break
PWR_LED
+4.3VMVP
+3.1VD
DGND
MODE_SW
KEY_PLAYBACK
KEY_WIDE
KEY_TELE
SHUT1
SHUT2
PWR_KEY
SPK_OUT1
SPK_OUT0
+3.3VS
DGND
PWR_LED
FLASH_VP
STROBE_TRG
AF_LED
STROBE_CHG
MS_INS
STA_LED
MS_CLK
MS_BS
MS_PWON
MSDATA[0..3]
+3.1VD
DGND
SPK_OUT0
SPK_OUT1
XP0
XP1
AC_DET
LI_CHK
TEMP_AD
TEMP_AD
XP0
XP1
AC_DET
LI_CHK
+1.8VD
CDS_EN
CDS_EN
KEY_SW
KEY_SW
FLASH_RDY
FLASH_RDY
+3.3VS
SSGSL
SSGSL
LENS_SCLK
LENS_SDATA
AF_LED
MD1
MD1
+3.1V_CDS
+3.1V_CDS
USBGND1
USBGND1
+3.1V_CDS
+3.1VD
+3.1V_CDS
PC
TV
Batt
Shutter Key
Strobe Module
Memory Stick
Lens Module
LCD
CCD Sensor
Dial Mode
TP51TP51
MS_CARD
MS_CARD
MSDATA[0..3]
MS_CLK
MS_INS
MS_BS
MS_PWON
STA_LED
+3.1VD
DGND
STROBE_TOP
STROBE_TOP
+3.1VD
+3.3VS
DGND
SHUT1
SHUT2
PWR_LED
PWR_KEY
FLASH_VP
STROBE_TRG
AF_LED
STROBE_CHG
SPK_OUT0
SPK_OUT1
FLASH_RDY
+3.1V_CDS
TP52TP52
H2H2
TP55TP55
Lens
Lens
+3.1VD
LENS_RST
LENS_EN
LENS_SDATA
LENS_SCLK
ZOOM_PR
FOCUS_PI
ZOOM_PI
SHUTER_M0
SHUTER_M1DGND
+4.3VM
FOCUS0
FOCUS1
FOCUS2
FOCUS3
DSP
DSP
MEM_UDQS
MEM_LDQS
MEM_UDM
MEM_LDM
MEM_CKE
MEM_WE
MEM_CAS
MEM_RAS
MEM_CS
MEM_BA0
MEM_BA1
MEM_CK
MEM_CKN
ICE_D[0..3]
ICE_S[0..2]
ICE_CLK
ICE_Break
MEM_D[0..15]
MFD_WE
MFD_RE
MFD_ALE
MFD_CE
MFD_WP
MFD_CLE
MFD_RDY
STA_LED
LCD[0..7]
MSDATA[0..3]
MFD[0..7]
CCD[0..11]
SHUTER[0..1]
FOCUS[0..3]
LCD_ON
STROBE_TRG
+3.3VS
STROBE_CHG
FOCUS_PI
ZOOM_PI
TG_EN
ZOOM_PR
LCD_EN
LCD_HD
LCD_VD
MIC_IN
LENS_EN
AFE_RST
TG_ON
SHUT1
SHUT2
PWR_KEY
USB_D-
MS_PWON
MS_CLK
PWR_CTRL
LCD_CLK
CCD_HD
SCLK
CCD_VD
AUDIO_OUT
+1.8VD
PXCLK
BAT_AD
SDATA
USB_D+
VIDEO_OUT
+1.2VD
DGND
+3.1VD
MODE_SW
LENS_RST
CCD_ON
MEM_A[0..12]
USB_DET
A/V_DET
KEY_PLAYBACK
KEY_TELE
KEY_WIDE
AFE_SCK
AFE_SDA
PWR_LED
VP
SPK_OUT0
SPK_OUT1
MS_BS
MS_INS
TEMP_AD
XP0
XP1
AC_DET
LI_CHK
CDS_EN
KEY_SW
FLASH_RDY
SSGSL
LENS_SDATA
LENS_SCLK
AF_LED
MD1
+3.1V_CDS
TP54TP54
MCP
MCP
MEM_LDQS
MEM_LDM
MEM_BA0
MEM_BA1
MEM_UDM
MEM_A[0..12]MFD[0..7]
MEM_CK
MEM_CKN
MEM_CKE
MFD_RDY
MFD_RE
MFD_WE
MFD_ALE
MFD_CE
MFD_WP
MFD_CLE
MEM_D[0..15]
+3.1VD
+1.8VD
DGND
MEM_UDQS
MEM_RAS
MEM_CAS
MEM_WE
MEM_CS
Power
Power
CCD_ONVP
FLASH_VP
DGND
PWR_CTRL
LCD_ON
+3.3V
+3.1VD
+1.2VD
-7.5V
+13V
LCD_BL-
LCD_BL+
BAT_AD
+3.3VS
+1.8VD
+4.3VM
XP0
XP1
AC_DET
LI_CHK
TEMP_AD
USBGND1
H1H1
LCD
LCD
LCD_EN
SCLK
SDATA
LCD[0..7]
DGND
LCD_CLK
LCD_HD
LCD_VD+3.1VD
LCD_BL+
LCD_BL-
CDS
CDS
+3.3V CCD[0..11]
PXCLK
CCD_VD
CCD_HD
-7.5V
+13V
DGND
TG_ON
AFE_RST
TG_EN
AFE_SCK
AFE_SDA
+1.8VD
CDS_EN
SSGSL
+3.1V_CDS
TP47TP47
TP48TP48
TP49TP49
SW
SW
+3.1VD
DGND
KEY_TELE
KEY_WIDE
KEY_PLAYBACK
MODE_SW
KEY_SW+3.3VS
TP50TP50
JACK_Audio
JACK_Audio
+3.1VD
USB_D+
USB_D-
A/V_DET
DGND
VIDEO_OUT
USB_DET
MIC_IN
AUDIO_OUT
MD1
USBGND1
+3.1V_CDS
TP46TP46
SW
All manuals and user guides at all-guides.com

4-1
DSC-S980
NOTE:
•-XX, -X mean standardized parts, so they may have some differences from
the original one.
•Items marked “*” are not stocked since they are seldom required for routine
service. Some delay should be anticipated when ordering these items.
•The mechanical parts with no reference number in the exploded views are not
supplied.
•Due to standardization, replacements in the parts list may be different from
the parts specified in the components used on the set.
When indicating parts by reference number,
please include the board name.
The components identified by mark 0or
dotted line with mark 0are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
•Color Indication of Appearance Parts
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
•Abbreviation
AR : Argentine model
AUS:Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
EE : East European model
HK : Hong Kong model
J:Japanese model
JE : Tourist model
KR : Korea model
NE : North European model
TW : Taiwan model
TH : Thai model
4. REPAIR PARTS LIST
All manuals and user guides at all-guides.com

4-2
DSC-S980
Ref. No. Part No. Description Ref. No. Part No. Description
1X-2345-955-1 CABINET (FRONT) ASSY (S) (SILVER)
1X-2345-956-1 CABINET (FRONT) ASSY (B) (BLACK)
1X-2345-957-1 CABINET (FRONT) ASSY (P) (PINK)
2X-2345-958-1 CABINET (UPPER) ASSY
3X-2345-944-1 CABINET (REAR) ASSY (S) (SILVER)
3X-2345-945-1 CABINET (REAR) ASSY (B) (BLACK)
3X-2345-954-1 CABINET (REAR) ASSY (P) (PINK)
4 4-137-870-01 SCREW_TP_1.7_3.7_A0.4_D3_N
4-1-1. OVERALL SECTION
4-1. EXPLODED VIEWS
5 4-136-408-01 BELT (L), MIDDLE
6X-2345-941-1 COVER ASSY (S), JACK (SILVER)
6X-2345-942-1 COVER ASSY (B), JACK (BLACK)
6X-2345-943-1 COVER ASSY (P), JACK (PINK)
73-288-943-01 SCREW_TP_1.4_3_A_0.2_D=2.5
83-113-001-01 SCREW TP 1.4*2.5
94-136-409-01 BELT (R), MIDDLE
1
4576
2
8
3
7
4
4
4
9
8
Main Frame Section
(See page 4-3)
All manuals and user guides at all-guides.com

4-3
DSC-S980
Ref. No. Part No. Description Ref. No. Part No. Description
51 A-1701-267-A ST BLOCK ASSY (Note 2)
52 3-288-943-01 SCREW_TP_1.4_3_A_0.2_D=2.5
53 4-137-871-01 SCREW_TP_1.4_3.5_A0.3_D2.5_N
54 4-135-316-01 LID (S), BT (SILVER)
54 4-135-317-01 LID (B), BT (BLACK)
54 4-135-318-01 LID (P), BT (PINK)
55 4-135-314-01 LCD (Note 2)
56 4-135-313-01 BRACKET, LCD
57 X-2345-712-1 MAIN FRAME SUB ASSY
58 4-135-315-01 SHEET, CCD CONNECTOR
0F1 1-576-363-11 FUSE (1A/30V)
0F2 1-576-913-11 FUSE, MICRO (1608 TYPE) (1.6A/36V)
*JC1 1-820-333-11 MULTI CONNECTOR (REC) 8P (USB • A/V OUT)
4-1-2. MAIN FRAME SECTION
ns: not supplied
51
(Note 2)
53
52
56
55
(Note 2)
57
58
54
52
53
Lens Section
(See page 4-4)
ns
(Note 1, 2)
F1
F2
JC1
Note 1: In case of the main board failure, contact your local
Sony service Headquarter for the measures.
Note 2: The adjustment is not required after replacing these
parts.
• Refer to page 4-1 for mark 0.
All manuals and user guides at all-guides.com

4-4
DSC-S980
Ref. No. Part No. Description Ref. No. Part No. Description
101 A-1701-284-A LENS BLOCK ASSY
102 4-135-324-01 FILTER SET, LOW PASS
103 4-135-323-01 CCD PLATE SHEET
104 3-288-943-01 SCREW_TP_1.4_3_A_0.2_D=2.5
4-1-3. LENS SECTION
ns: not supplied
101
102
103
104
ns
(CCD Assy)
(Note)
ns
ns
ns
Note: In case of the CCD assy failure, contact your local Sony
service Headquarter for the measures.
All manuals and user guides at all-guides.com

4-5E
DSC-S980
4-2. ACCESSORIES
Checking supplied accessories.
Note: This item is supplied with the unit as an accessory, but
is not prepared as a service part.
Cyber-shot Handbook (PDF)
The CD-ROM supplied contains all of language version of
the Cyber-shot Handbook (PDF) for printing.
•The printed matter is not supplied. If required, please
order it with the part number below.
CD-ROM
“Cyber-shot application software”
“Cyber-shot Handbook”
“Cyber-shot Step-up Guide”
4-121-436-01
Battery Charger
BC-CSK/BC-CSKA
01-487-212-11 (US, CND)
Wrist Strap
2-050-981-01
Rechargeable Battery Pack
NP-BK1
(Note)
Dedicated USB Cable
3-196-981-01
Dedicated A/V Cable
3-196-980-01
Battery Charger
BC-CSK/BC-CSKA
01-487-212-21 (EXCEPT US, CND)
Conversion (2P) Adaptor
01-569-008-12 (E: NTSC)
Power Cord
01-832-169-41 (UK)
01-833-892-41 (KR)
01-834-482-31 (AEP, E)
01-835-983-11 (AUS)
∗ 4-121-439-11 ( ENGLISH )
∗ 4-121-439-21 ( FRENCH )
∗ 4-121-439-31 ( ITALIAN )
∗ 4-121-439-41 ( SPANISH )
∗ 4-121-439-51 ( PORTUGUESE )
∗ 4-121-439-61 ( GERMAN )
∗ 4-121-439-71 ( DUTCH )
∗ 4-121-439-81 (TRADITIONAL CHINESE)
∗ 4-121-439-91 (SIMPLIFIED CHINESE)
∗ 4-121-440-11 ( RUSSIAN )
∗ 4-121-440-21 (ARABIC)
∗ 4-121-440-31 (PERSIAN)
∗ 4-121-440-41 (KOREAN)
∗ 4-121-440-51 ( POLISH )
∗ 4-121-440-61 ( CZECH )
∗ 4-121-440-71 ( HUNGARIAN )
∗ 4-121-440-81 ( SLOVAK )
∗ 4-121-440-91 ( SWEDISH )
∗ 4-121-441-11 ( FINNISH )
∗ 4-121-441-21 (NORWEGIAN)
∗ 4-121-441-31 ( DANISH )
∗ 4-121-441-41 (THAI)
∗ 4-121-441-51 (MALAYSIAN)
∗ 4-121-441-61 ( TURKISH )
∗ 4-121-441-71 ( GREEK )
∗ 4-121-441-81 ( UKRAINIAN )
Instruction Manual
4-121-442-11
( ENGLISH ) (CND, AEP, UK, E, AUS)
4-121-442-21
( FRENCH, ITALIAN ) (CND, AEP)
4-121-442-31
( SPANISH, PORTUGUESE ) (AEP, E)
4-121-442-41
( GERMAN, DUTCH ) (AEP)
4-121-442-51
(TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E)
4-121-442-61
( RUSSIAN, UKRAINIAN ) (AEP)
4-121-442-71
(ARABIC, PERSIAN) (E)
4-121-442-81
(KOREAN) (KR)
4-121-442-91
( POLISH, CZECH ) (AEP)
4-121-443-11
( HUNGARIAN, SLOVAK ) (AEP)
4-121-443-21
( SWEDISH, FINNISH ) (AEP)
4-121-443-31
(NORWEGIAN, DANISH ) (AEP)
4-121-443-41
(THAI, MALAYSIAN) (E)
4-121-443-51
( TURKISH, GREEK ) (AEP)
4-121-443-61
( ENGLISH, SPANISH ) (US)
• Refer to page 4-1 for mark 0.
All manuals and user guides at all-guides.com

DSC-S980
[Regarding Fuse]
•MAIN BOARD
Ref. No.: F2
Part No.: 1-576-913-11
Description: FUSE, MICRO (1608 TYPE) (1.6A/36V)
Ref. No.: F1
Part No.: 1-576-363-11
Description: FUSE, MICRO (1005 TYPE) (1A/30V)
All manuals and user guides at all-guides.com

Revision History
Reverse
DSC-S980
Ver.
1.0
Date
2009.01
History
Official Release
Contents
—
S.M. Rev.
issued
—
985265011.pdf
All manuals and user guides at all-guides.com