Sony DMX-DVD User manual

DVD
DVD Player
Operating Instructions
DMX-DVD
©2008 Sony Corporation
4-117-787
-11 (1 )
I7911 000008A I

Owner's Record
The model and serial numbers are
located at the rear of the product.
Record these numbers in the spaces !
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.
Model No.
ISerial No.
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
ATIENTION
RISQUE DE CHQC ELECTRIQUE,
NE
PAS QUVRIR
PRECAUCION
RIESGQ DE CHQQUE ELECTRICQ
NOABRIR
it
This symbol is intended to
alert the user to the
presence of uninsulated
"dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute arisk
of electric shock to persons.
~
This symbol is intended to
alert the user to the
presence of important
•operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
The apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall
be placed on the apparatus.
This product is not intended for use
with apersonal computer, and
operations cannot be guaranteed when
connected to one.
2
NOTIFICATION
This equipment has been tested and
found to comply with the limits for a
Class Bdigital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in aresidential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in aparticular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
•Reorient or relocate the receiving
antenna.
•Increase the separation between the
equipment and receiver.
•Connect the equipment into an outlet on
acircuitdifferent from that to which the
receiver is connected.
•Consult the dealer or an experienced
radiorrV technician for help.
Pursuant to FCC regulations, you are
cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
CAUTION
To prevent electric shock, do not use
this polarized AC plug with an
extension cord, receptacle or other
outlet unless the blades can be fully
inserted to prevent blade exposure.
CAUTION
The use of optical instruments with this
product will increase eye hazard. As
the laser beam used in this DVD player
is harmful to eyes. do not attempt to
disassemble the cabinet. Refer
servicing to qualified personnel only.
For Customers in Canada
This Class Bdigital apparatus complies
with Canadian ICES-Om.
CAUTION
You are cautioned that any changes or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.
Reverse engineering or disassembly is
prohibited.
INSTALLATION
The apparatus should be installed near
an easily accessible AC power outlet.
Licensing Information
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing, LLC.
Manufactured under license from
Dolby Laboratories. "Dolby" and the
double-D symbol are trademarks of
Dolby Laboratories.
"BRA VIA" and BRA VIA are
trademarks or registered marks of Sony
Corporation.
"XrossMediaBar" is a trademark of
Sony Corporation. "XMB" is a
trademark of Sony Corporation and
Sony Computer Entertainment Inc.
DYe
VIDEO
[I]DOLB~
DIGITAL I

ImportantSafety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5)
Do not use this apparatus near water.
6) Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators,
heat registers, stoves,
or other apparatus (including
amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or
grounding-type plug. Apolarized plug has two blades
with one wider than the other. Agrounding type plug has
two blades
and athird grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement
of the obsolete outlet.
10) Protect the
power cordfrom being walked on orpinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
~
bracket, or table specified by the 1I1
manufacturer, or sold with the apparatus. • ~
When acart is used, use caution when .,
moving the cart/apparatus combination to ~ ~.a
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in
any way, such as power-supply cord or plug
is damaged, liquid has been spilled orobjects havefallen
into the apparatus, the apparatus has
been exposed to rain
or moisture, does not operate normally, or has been
dropped.
ACCESSORIES
Keep small accessories out of children's reach. Use only the
specified accessories with this product.
Notes About the Discs
•To keep the disc clean, handle the disc by its edge. Do not
touch the surface. Dust, fingerprints, or scratches
on the disc
may cause
it to malfunction.
•
Do not expose the disc to direct sunlight or heat sources such
as hot air ducts, or leave it
in acar parked in direct sunlight as
the temperature may rise considerably inside the car.
•After playing, store
the disc in its case.
•Clean the disc with acleaning cloth. Wipe the disc from the
center out.
•Do not use solvents such
as benzine, thinner, commercially
available cleaners, or anti-static spray intended for vinyl LPs.
• If you have printed the disc's label, dry the label before
playing.
Precautions
On safety
•To prevent fire or shock hazard, do not place objects filled
with liquids, such
as vases, on the apparatus.
•Should any solid object or liquid fall into the cabinet, unplug
the player and have
it checked by qualified personnel before
operating
it any further.
•Take care when routing the cables so that they do not become
entangled and catch
on your feet or hands.
On power sources
•The player is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if the player
itself has been turned off.
•Ifyou are not going to use the player for along time,
be sure
to disconnect the player from the wall outlet. To disconnect
the
AC power cord, grasp the plug itself; never pull the cord.
3

i
Commercial DVD
L¥i?
I
,
VI D E 0 I
DVD-RW/-R 2tD
v:re
R
RW
R4.7
DVD+RW/+R/ m•
+R DL
DVD + R.Wrlt.bl.
DYD+R
m
DYD+R DL
Music CD
@]D~@
DIGITAL AUDIO
CD-RW/-R
@]D~@
ffiJD~@
IReWritablel
'ji4g,li,mmm
IFormat of discs
This Player Can Play the
Following Discs
"DVD+RW," "DVD-RW," "DVD+R," "DVD+R DL."
"DVD-R," "DVD VIDEO," and "CD" logos are
trademarks.
The player can play CD-ROMs/CD-Rs/CD-RWs recorded
in the following formats:
-music CD format
- MP3 audio tracks and JPEG image files of format
conforming to ISO 9660* Level IlLevel 2, or its extended
format, Joliet
- KODAK Picture CD format
*Alogical format of files and folders on CD-ROMs.
defined by ISO (International Organization for
Standardization).
Note about CDs/DVDs
The player can play DVD-ROMs/DVD-RWs/DVD-Rs/
DVD-Rs DL/DVD+RWs/DVD+Rs/DVD+Rs DL recorded
in the following formats:
-MP3 audio tracks and lPEG image files of format
conforming to UDF (Universal Disk Format).
On placement
•Be sure to mount the player on the back of the TV set. It is
not meant to be used unattached to the TV set.
•Place the player in alocation with adequate ventilation to
prevent heat build-up in the player.
•Do not place the player on asoft surface such as arug.
•Do not place the player in alocation near heat sources, or in
aplace subject to direct sunlight, excessive dust, or
mechanical shock.
•Do not install the player in an inclined position. It is designed
to be operated in avertical position only.
•Do not place any objects on the player.
•Keep the player and the discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
•Install the playerso that the AC power cord can be unplugged
from the wall socket immediately in the event of trouble.
•When using the adjustable mounting bracket at setting 2, be
sure to use the supplied Velcro strip (see page 14).
On operation
•If the player is brought directly from acold to awarm
location, or is placed in avery damp room, moisture may
condense on the lenses inside the player. Should this occur,
the player may not operate properly. In this case, remove the
disc and leave the player turned on for about half an hour
until the moisture evaporates.
•When you move the player, take out any discs. If you don't,
the disc may be damaged.
•Do not move the TV using the player as ahandle.
On adjusting volume
•Do not turn up the volume while listening to asection with
very low level inputs or no audio signals. If you do, the
speakers may be damaged when apeak level section is
played.
On cleaning
•Clean the cabinet with asoft cloth slightly moistened with a
mild detergent solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or benzine.
On cleaning discs, disc/lens cleaners
•Do not use cleaning discs or disc/lens cleaners (including wet
or spray types). These may cause the apparatus to
malfunction.
On replacement of parts
• In the event that this unit is repaired, repaired parts may be
collected for reuse or recycling purposes.
•If you have any questions or problems concerning your
player, please consult your nearest Sony dealer.
4

Example of discs that the player cannot
play
The player cannot play the following discs:
oCD-ROMs/CD-Rs/CD-RWs other than those recorded in the
formats listed on the previous page.
oCD-ROMs recorded in PHOTO CD format.
oData part of CD-Extras.
oDVD Audio discs.
oHD layer on Super Audio CDs.
oBlu-ray discs
oHD DVDs
oDisc recorded with an AVCHD-compatible DVD video
camera
oAcommercial DVD with adifferent region code.
oAdisc recorded in acolor system other than NTSC, such as
PAL or SECAM (this player conforms
to the NTSC color
system).
oAdisc that has anon-standard shape (e.g., card, heart).
oAdisc with paper or stickers on it.
• A disc that has the adhesi ve of cellophane tape or asticker
still left on
it.
Region code
This player will play commercial DVDs (playback only)
labeled with region code I
or B.
If you try to play any other commercial DVD, the message
"Playback prohibited by area limitations." will appear on
the TV screen.
Depending on the commercial DVD, there
may be no region code indication, even though playing the
commercial DVD is prohibited by area restrictions.
p
•Notes about DVD+RWs/DVD+Rs/DVD+Rs
DL, DVD-RWs/DVD-Rs/DVD-Rs DL or CD-
Rs/CD-RWs
Some DVD+RWs/DVD+Rs/DVD+Rs DL, DVD-RWs/
DVD-Rs/DVD-Rs DL, or CD-Rs/CD-RWs cannot be
played on this
player due to the recording quality or
physical condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been correctly
finalized.
For more information, refer to the operating
instructions for the recording device. Note that
some
playback functions may not work with some DVD+RWs/
DVD+Rs/DVD+Rs DL, even if they have been correctly
finalized. In this case, view the disc by normal playback.
Also
some DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
•Music discs encoded with copyright pro-
tection technologies
This product is designed to playback discs that conform
to the Compact Disc (CD) standard.
Recently, various music discs
encoded with copyright
protection technologies are
marketed by some record
companies. Please be aware
that among those discs, there
are some that
do not conform to the CD standard and may
not be playable by this product.
•For player that cannot play images that
contain acopy protection only
Images in DVD-VR mode with CPRM* protection may
not be played
if they contain a copy protection signal,
"Copyright lock" appears on the screen.
*
CPRM (Content Protection for Recordable Media) is a
coding technology that protects the
copyright of images.
•Note on DualDiscs
ADualDisc is atwo sided disc product which mates
DVD recorded material on one side with digital audio
material on the other side.
However, since the audio material side does
not conform
to the
Compact Disc (CD) standard, playback on this
product is not guaranteed.
Note on playback operations of DVDs
Some playback operations of DVDs may be intentionally
set by software producers. Since this
player plays DVDs
according to the disc contents the software producers
designed, some playback features
may not be available.
Also, refer to the instructions
supplied with the DVDs.
(bJ
o DVD Media/Formats are not universally compatible
oPlayback on all home DVD players cannot be guaranteed.
Some players lack the ability to read due to the optical
ret1ection standard
of DVD discs and lor due to encoding
incompatibilities. Refer
to the specifications of your
playback equipment for additional compatibility
information.
5

Table of Contents
<:>"~r,,iE!\nI ~ ~
Package Contents 9
Remote Control 10
TV Menus
11
Gettin9 Sta rted 13
Attaching the DVD Player to Your TV 13
Locating the Essential Parts 16
Connecting Your DVD Player
16
Configuring Your TV to Operate the DVD Player 17
How to Insert and Eject Discs 17
LJ!)irlg ttle Flla)fer 1~
Guide to the Control Menu Display 19
Control Icons and Descriptions
21
Playing Discs 22
Resuming Playback From the Point Where You Stopped the Disc
(Multi-disc Resume) 23
Adjusting the Playback Picture
(CUSTOM PICTURE MODE) 28
Sharpening the Picture
(SHARPNESS) 29
Adjusting the Delay Between the Picture and Sound
(AV SYNC) 29
Locking Discs
(CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) 30
DVD Disc Operations 33
Changing the Sound 34
TV Virtual Surround Settings
(TVS) 35
Settirlg!) and Adju!)tmerlt!) ~ 37
Using the Setup Menu 37
Setting the Display or Sound Track Language
(LANGUAGE SETUP) 38
MFl3 Audio arld JFlEG Image!) 43
About MP3 Audio Tracks and JPEG Image Files 43
Viewing JPEG Images as aSlide Show 44
Playing MP3 Audio Tracks 47
<:>ttler Information 4~
Troubleshooting 49
Language Code List
51
Parental Control Area Code List 51
Index 53
7

8
About This Manual
• Instructions in this manual describe the controls on the remote.
• "DVD" may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+Rs DL
(+VR mode) and DVD-RWs/DVD-Rs/DVD-Rs DL (VR mode, video mode).
• The meaning of the icons used in this manual is described below:
Icons Meaning
m!llJ!!I
Functions available for commercial DVDs and DVD+RWsIDVD+RsIDVD+Rs DL in
+VR mode or DVD-RWsIDVD-RsIDVD-Rs DL in video mode
IiElm
Functions available for DVD-RWsIDVD-Rs/DVD-Rs DL in VR (Video Recording)
mode
1m
Functions available for music CDs or CD-Rs/CD-RWs in music CD format
mwim Functions available for
DATA CDs (CD-ROMs/CD-Rs/CD-RWs containing MP3*
audio tracks, and
lPEG image files)
IiIiIIiE!ll] Functions available for
DATA DVDs (DVD-ROMs/DVD+RWsIDVD+Rs/DVD+Rs
DLlDVD-RWsIDVD-Rs/DVD-Rs DL containing MP3* audio tracks, and JPEG image
files)
*MP3 (MPEG-I Audio Layer III)
is astandard format defined by ISO (International Organization for Standardization)/
IEC (International Electrotechnical Commission) MPEG which compresses audio data.

Overview
Thank you for purchasing this Sony BRA VIA DVD Link, DMX-DVD. Some features of this product include:
•Attachment to the
back of your Sony BRA VIA TV to remain out-of-sight.
•Ability to use
your TV's remote control, providing aseamless integration between the player and your TV.
This player is compatible with certain models of BRA VIA televisions. Check the compatibility with your TV
before continuing. Visit http://www.sonystyle.com/dmxdvd to view model compatibility.
Package Contents
Please check the contents against the list below.
OMX-OVO
AC Adapter with
AC Cord
Remote
Control
Fixed Mounting
Bracket
USB Cable
Adjustable
Mounting Bracket
HOMI Cable
Velcro Strips (x2) Type AA
Batteries (x2)
Thumb
Screw
Plastic
Fasteners (x2)
Linux Flyer
Warranty Card Operating Instructions
9

Remote Control
Operate the DVD player using the supplied Sony remote control.
Press to navigate left
Press to navigate right
Press to navigate up
Press to navigate
down
•
+
+
[ill [j] 0Press to display the DVD top menu
[l]
[2]
I!m1I Press to switch between TV and DVD mode for
TVs
-with XMBnl (XrossMediaBar) menu. (See page II
for more information.)
~
RETURN
Press to exit amenu
•
ffiJ
@]
Of"TIONS
Press to display the DVD or Data Discmenu
•
~
'i[ID
[§]
0Press to select an item
~
[ID
DISPLAY
Press to display the Control Menu
•
[2]
[lJ
~
Press to play
[ID
•Press to stop
II
Press to pause
....
Press to scan/slow backward
[]
~
Press to scan/slow forward
[ID
•Press to go to the previous chapter, track,
or scene.
•Press to go to the next chapter, track,
or scene.
1bJ
• Your Sony TV remote control can also operate the DVD player. Some of the buttons illustrated here may be
different or may not be
£Ivai lable on your Sony TV remote control.
•For programmable remote controls, you must be
in the TV mode to navigate the DVD player. Press the TV
button to enter the
TV mode and use the buttons described to navigate.
10

Some of the DVD functions may require pressing two buttons to operate the DVD player. For example, press.
then 8to eject or reinsert the disc. Refer to the chart below for other operations.
[ill .+1
.+2
.+3
.+4
0+
5
0+
6
0+
7
.+8
0+
9
0+
0
Press to advance to the next scene
Press to replay the previous scene
Press to clear number entries
Press to
change the audio language for DVD discs and
background music during photo play
Press to display the subtitles
Press to display the playing time and remaining time
Press to change the angle
Press to eject the disc
or reinsert the disc
Press to
change the zoom
Press to
change the surround sound settings
TV Menus
~
RETURN
Press to stop playback
•
[ID
0Press to play or pause
[ID
•Press to scan/slow forward
•Press to scan/slow backward
Depending on the menu type, there are some differences
in setup and operation. Identify your menu type below
and follow the directions as explained for your TV.
TV Home Menu/XMBTM (XrossMediaBar)
Panel Menu
HOMI DVD Link
r;;:;J Shortcuts
~ Select from connected equipment
Favorites
Wide Mode
Clock/Timers
Parental
lock
Closed Captions (CC)
Cable
PC-PIP
@Change
CJ:3l!1D Back
Mmu Exit
11

Getting Started
Attaching the DVD Player to Your TV
Fixed Mounting Bracket
The Fixed Mounting Bracket is recommended for smaller model size TVs. With larger TV models, the bracket
may
cause the player to recess behind the TV. In this case, use the supplied Adjustable Mounting Bracket
illustrated on the next page.
1
2
Insert the guide pins on the bracket into the guide
holes on the
TV. The holes on the bracket should align
to the holes on the
TV.
Insert the two plastic fasteners (supplied) into the
holes to hold the bracket
in place.
Plastic Fasteners ...
3Slide the DVD player onto the bracket with the
DVD
slot facing the outer edge of the TV. x+
.(l:n
To remove the bracket from the TV, use aPhillips screwdriver (not supplied) to loosen the plastic fasteners.
13

Adjustable Mounting Bracket
The Adjustable Mounting Bracket is recommended for 46" TVs or larger. Using the table below, choose the
preferred position at which to secure the bracket.
Adjustable Mounting Bracket Settings
[I] The bracket retracts so that the DVD player is close to the edge of the TV.
If the player protrudes
beyond the TV at this setting, use the Fixed Mounting Bracket.
[2J
The bracket expands so that the DVD player is much closer to the edge of the TV. This is
recommended for larger TV models. Use of aVelcro strip (supplied)
is advised when using
bracket setting 2.
..... ~.=:J
-~, .. _-
1-··-
i-
,;---[1] Viewing window 1
.~ Screw point for window 1
, ,[g] Viewing window 2
~ Screw point for window 2,
ensuring there is enough
liner length.
14
Attaching a Velcro Strip for Bracket Setting 2
<::::".~/7 Peel off label to expose
.I adhesive. Leave the liner with
2: /the word "PULL.:' attached.
(/:£,
Only one Velcro strip is necessary.
!~
I Jo ~
I0 ~ ~ Attach the Velcro strip to
I !~ '7 the back of the bracket as
/ ~ i~ tillustrated. Leave enough
~o -~L~r/ !Ispace so that you can pull
~~// Ir/ the adhesive liner to
--~:::::::- /Y remove it in alater step.
DO NOT remove the liner
until you have decided
on
the position of the bracket.

Attaching the Mounting Bracket to the TV
1With the bracket fully extended, insert the guide
pins on the bracket into the guide holes on the TV
The holes on the bracket should align to the holes on
the TV
2
3
4
Insert the 2plastic fasteners (supplied) into the
holes, then press in the head of the fasteners until
they click.
Slide the bracket so that the viewing window covers
the corresponding number (see the illustrations and
table on the previous page). If the viewing window
indicates Bracket Setting 2, be sure to use aVelcro
strip (supplied); see previous page.
Align the slider on the bottom of the receiver unit
with the groove of the installation bracket.
Arrow Label Plastic Fasteners
x
1,
5
6
Slide down the DVD player onto the bracket with
the DVD slot facing the outer edge of the TV Before
proceeding to the next step, make sure that you are
satisfied with the position of the DVD player in
relation to the TV
Secure the location of the sliding bracket by
screwing the Thumb Screw into the screw point
located just beneath the viewing window. If Bracket
Setting 2 is used, peel off the arrow label by pulling
downwards, and firmly press the bracket onto the
TV
[ilL
15

Locating the Essential Parts
Item Description
[I] Disc Slot Insert disc here.
[g]
Power LED Indicates the status of the player.
Green LED: the player
is powered on.
~
Disc Loading Indicates the disc loading status.
LED Orange LED: the disc
is loading or unloading.
@]
Eject Button Ejects the disc from the player.
[ID
HDMIOut
Connects to the HOMI port on the TV
[ID
DMexOUT Connects to the OMex/SERVICE port on the TV (models with
XMBTM only).
[I] DC
IN 12V Connects to the supplied AC adapter with AC cord.
Connect the L-shaped end of the HOMI cable (supplied) to
the
HOMI OUT on the OVO player, then connect the
straight end
of the HOM Icable to any HOMI IN on the TV
[j].
For models with XMBnl menu only: Connect the supplied
USB cable between the OVD player's OMexport and the
OMex/SERVICE port on the TV
[1].
Connect the supplied AC adapter with AC power cord
between the
OC IN 12V and the nearest wall outlet ~.
2
3
Connecting Your DVD Player
1
16

Configuring Your TV to Operate the DVD Player
After completing all of the required connections, configure your TV to the DVD player.
TVs with XMBTM TVs with Panel Menu
1
2
3
Press HOME on the remote control and select
HOMI Settings.
Select Control for HOMI or HOMIControl.
Highlight On and press 0and exit the menu.
1
2
3
4
Press HOME on the remote control and select
Setup.
Select Control for HOMI.
Highlight On and press O.
Highlight Update Control for HOMI List,
select OK and exit the menu.
How to Insert and Eject Discs
Gently insert the disc into the disc slot as illustrated.
The DVD player will load the disc to playing
position. The LED on the player lights up in orange
while the disc is loading.
Press the Eject button on the DVD player. The
player will automatically eject the disc. Gently
remove the disc from the disc slot. The LED on the
player lights up in orange while the disc is ejecting.
(b;
You can also eject the disc by pressing. +8 on
your remote control when the TV is powered on and
in the DVD mode.
I---~--
Label
~
17

Using the Player
Guide to the Control Menu Display
Use the Control Menu to select afunction and to view related information.
Accessing the player's Control Menu display
When no disc is in the DVD player:
While in TV mode with no disc inserted in the player. you can access the Control Menu to view and change
settings. To access the Control Menu, identify your TV menu and follow the directions below.
. r/:JJ
TV smust have Control for HDMI or HDMI Control set to "On." See "Configuring Your TV to Operate the
DVD Player" on page 17 or the TV's Operating Instructions for details on this setting.
TVs with XMBTM TVs with Panel Menu
5Press the DISPLAY button.
6Navigate to IiU
t
., I(SETUP) using +1+.
7Press G.
External Inputs
~
<:1 TV
o. Video 1
oVideo 2
oVideo 3
00 .Component 1
0(') Component 2
~ HOMI1
~ HOMI2
Turn on the TV.
Press the HOME button on the remote control.
Select the External Inputs menu.
Highlight DVD Link and press
G.
~1Exit
@Change
1
2
3
4
Turn on the TV.
Press the HOME button on the remote control.
Highlight the Settings icon.
Press the +button and highlight the DVD Link
Settings icon.
Press
G.
1
2
3
4
5
19

When a disc is inserted in the DVD player
While in the DVD mode with adisc playing, press DISPLAY repeatedly to turn on or change the Control Menu
display as follows:
[
Control Menu display I
Cont,"1 Minu display 2(appeacs for certain discs only)
Control Menu display off
Control Menu display
The Control Menu display Iand 2will show different items depending on the disc type.
Example: Control Menu display I when playing a DVD VIDEO.
,..----- Currently playing chapter number*2
,..--..-- Currently playing title number*I
Total number of titles*!
Total number of chapters*2
Control Menu items
Selected item - ...... '1'
Playback status
(~ Playback,
II Pause,
,,---- •Stop, etc.)
Type of disc
being played
~iJn~--Jg~~~t- Playing timed
'"i'====--------+--Current setting
f------------+-- Options
20
Function name of
selected Control
Menu item
Operation message
Displays the track number for CDs, album number for DATA CDs/DATA DVDs.
Displays the MP3 audio track number,
or JPEG image file number for DATA CDs/DATA DVDs.
Displays the date for JPEG files.
To turn off the Control Menu display
Press DISPLAY repeatedly.