Sony BRAVIA KDL-32L5000 User manual

LCD Digital
Color TV
BRAVIA
Canada
1.877.899.S0NY
Model KDL-26L5000
Serial
Sony Customer Support
U.S.A.: www.sony.com/tvsupport
Canada: www.sony.ca/support
United States
1.800.222.S0NY
Sony will work to resolve
your
questions more quickly than your retailer.
Please Do Not Return
the Product to the Store
©2009 Sony Corporation
KDL-32L5000
KDL-26L5000

HIGH·DEfINITION TELEVISION
Serial No.
Owner's Record
The model and serial numbers are located at the rear of the TV.
Record these numbers in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding this
TV.
Model Name
III
'jijiiUrij,t.J;,
Your BRAVIA TV is ENERGY STAR qualified
in the "Home" mode.
It meets strict energy efficiency guidelines set by
the U.S. Environmental Protection Agency and
Department
of Energy. ENERGY STAR is ajoint
program of these govemment agencies. designed
to promote energy efficient products and
practices.
oWhen the TV is initially set up, it is designed to meet
ENERGY STAR requirements.
oChanges to certain features, settings, and functionalities of
this TV (i.e. PiclUre/Sound. Power Savings) can slightly
change the power consumption.
Depending upon such changed sellings. the power consumption
may increase which possibly could exceed the limits required for the
ENERGY STAR qualification.
Sony TV Model No.
KDL-26LSOOO
KDL-32LSOOO
Sony
Wall-Mount
SU-WL100 SU-WlSOO
Bracket Model
No.
Compatible Wall Mount Bracket Information
Use the following Sony WALL-MOUNT BRACKET with
your TV model.
Use with other WALL-MOUNT BRACKETS may cause
instability and could result in property damages
or injury.
Cleaning
When cleaning, be sure to unplug the power cord to avoid
any chance
of electric shock.
•Wipe the LCD screen gently with asoft cloth.
•Stubborn stains may be removed with acloth slightly
moistened with asolution
of mild soap and wann water.
• If using achemically pretreated cloth, please follow the
instruction provided on the package.
•Never use strong solvents such as athinner, alcohol
or
benzine for cleaning.
•See the supplied Safety Booklet for additional
infonnation.
[I] DOLB'f:
DIGITAL I
CAUTION
To prevent electric shock and blade exposure, do not use
this polarized AC plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted.
oOperate the TV only on 120-240 VAC.
Licensing Information
Macintosh is atrademark of Apple Inc., registered in the U.S. and
other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks
of HDMI Licensing, LLC.
Fergason Patent Properties. LLC:
U.S. Patent No. 5.717,422
U.S. Patent No. 6,816.141
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks
of Dolby Laboratories.
Blu-ray Disc is atrademark.
"BRA VIA", BRAVIA. BRAVIA Sync, and IIiI are trademarks or
registered marks
of Sony Corporation.
"PLAYSTA
nON" is aregistered trademark and "PS3" is a
trademark
of Sony Computer Entertainment Inc.
IThis manual is for the 26 and 32 class BRAVIA KDL-L5000 series models with screen size measured diagonally. The 32 class has a 3151
Iinch viewable image size (measured diagonally). __ J
2

Contents
Introducing Your New BRA VIA@
Welcome to the World of BRAVIA® 4
Experiencing Stunning HD with Your
BRAVIA 4
The Four Steps to aStunning
HD
Experience 5
TV Feature Highlights 5
Getting Started
Setting Up Your TV 6
Locating Inputs and Outputs 7
Connecting the TV 9
Connecting Other Equipment 12
Bundling the Connecting Cables 13
When Installing the TV Against aWall or
Enclosed Area 13
Securing the TV 14
Running Initial Setup 16
Operating the TV
Using the Remote Control. 17
Remote Control Button Description 18
TV Controls and Indicators 20
Using Features
Using BRAVIA Sync with Control for
HDMI
21
Using PIP Feature 22
Favorites 22
Wide Mode 23
Wide Mode with
PC 23
Inputs 24
Customer Support
United States
http://www.sony.com/tvsupport
Canada
http://www.sony.ca/support
Using the Menus
Navigating through TV Menus 25
Using the Picture Settings 26
Using the Sound Settings 27
Using the Screen Settings 28
Using the Channel Settings 30
Using the Parental Lock Settings
31
Using the Setup Settings 34
Other Information
PC Input Signal Reference Chart for PC and
HDMIIN 1/2/3 37
Preparing the TV for Wall-Mounting 38
Troubleshooting 39
Important Notices 43
Specifications 44
Index 45
On-line Registration
United States
http://productregistration.sony.com
Canada
http://www.SonyStyle.ca/registration
3

Introducing Your New BRAVIA®
Welcome to the World of BRAVIA@
Thank you for choosing this Sony BRAVIA® high-definition television. Use the
documentations listed below to get the most out of your
TV.
a
Safety Booklet
Contains precautionary
measures to keep you and
your TV safe. Read this
information prior to setting up
your
TV.
Operating Instructions
Provides the most detailed
information to operate your
TV.
aQuick Setup Guide
Provides TV setup information with sample
connection diagrams and
TV features.
Experiencing Stunning HD with Your BRAVIA
The quality of the image you see on your BRAVIA TV is only as good as the quality of the
signal it receives.
To experience the stunning detail of your new BRAVIA TV, you need
access to
HD programming. Your BRAVIA TV can receive and display HD programming
from:
•Over-the-air broadcasting via HD-quality antenna
•HD cable subscription
•HD satellite subscription
•Blu-ray
Disc™ player or other HD compatible external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
4

The FourSteps to aStunning HD Experience •
You can enjoy crisp, clear images, smooth
movement, and high-impact visuals from
1080 HD signals as shown here.
When you compare ahigh-definition signal
to astandard analog signal, you will notice
abig difference
in picture quality. If black
bars appear as shown here, press WIDE
on the remote control to fill the screen.
S'
Set, Sound, Source, and Setup a
Along with your BRAVIA TV set, acomplete HD system requires an HD sound system, a @-
(')
source of HD programming, and aproper connection setup. Refer to the Quick Setup ~.
Guide, enclosed separately, for connecting optional equipment.
~
s:::
..,
~
:e
OJ
~
:s
:b
@)
TV Feature Highlights
Your BRAVIA comes with many convenient features, such as:
~ BRAVIA Sync: Allows your BRAVIA TV to communicate with other Sony
equipment supporting the Control
for HOMI function (page 21).
~ PIP (Picture in Picture): You can work on your PC and watch your favorite TV
program simultaneously (page 22).
~ Favorites: Your favorite channels and inputs are at your finger tips for easy
access (page 22).
~ Auto Wide Mode: Set your TV to automatically adjust the screen based on the
signal resolution (page 23).
~ Input Selection: Allows you to easily switch between the connected equipment
(page 24).
5

Getting Started
Setting Up Your TV
The TV is packaged with adetached Table-Top Stand so you can mount the TV to awall right
away.
If you are not mounting the TV to awall, you will need to attach the Table-Top Stand. Use a
Philips screwdriver and the supplied screws to complete the task. Look for the attachment
instruction taped to the TV unit.
Be sure to consider the following while setting up your
TV:
•Disconnect all cables when carrying the TV.
•Carry the TV with the adequate number of people; larger size TVsrequire two or more people.
•Placement
of the hands carrying the TV is very important for safety and to avoid damage.
•Adequate ventilation is necessary (see page 13).
•For best picture quality, do not expose the screen to direct illumination
or sunlight.
•Avoid installing the TV in aroom with reflective wall and floor materials.
•Avoid moving the TV from acold area to awarm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering on the
TV.
•For additional safety information, read the supplied Safety and Regulatory Booklet.
•When cable connection is completed, be sure to secure the TV to astable surface
or mount it to a
wall. The designated Sony wall-mount bracket model is available on page 2
of this manual. For
details
on securing the TV and items listed above, see page 14.
6

Locating Inputs and Outputs
Side Panel
Rear Panel
•
o
CABLE/ANTENNA
2
Hom.
IN
VIDEO.
Ie
VIDEO
Il(@
(UOtlO) 11-++--1 3
II(@
A~~O
2
VIDEO IN
Item Description
This port is for service only.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as aset-top box, DVD player, and AIV receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1port when connecting DVI equipment. Use aDVI-to-HDMI
cable or adapter (not supplied). Equipment using aDVI connection also requires an
additional audio connection using an audio cable connected to AUDIO
(UR).
Connects to the SVIDEO outputjack of video equipment. If both composite video
and SVIDEO are connected, SVIDEO signal has priority.
If you have mono equipment, connect its audio output port to the TV's L(MONO)
audio input port. Use VIDEO IN 2with AUDIO L(mono) and R.
~ VIDEOIN2
SVIDEO
VIDEO/L
(MONO)-
AUDIO-R
~ PCIN
(RGS/AUDIO)
rn SERVICE
[2J HDMI IN 1/213
L-AUDIO-R
Connects to apersonal computer's video and audio output connector. Can also be
connected to other analog RGB equipment. See "PC Input Signal Reference Chart"
on page 37 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the
HDI5-HDI5 cable.
You may need to adjust the TV settings or your PC's resolution and timing. See
page
11 for information on how to setup your PC to this TV.
[§] DIGITAL AUDIO Connects to the optical audio input of adigital audio equipment that is
OUT (OPTICAL) PCMlDolby* Digital compatible.
*Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
(Continued) 7

Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV's audio through your stereo system.
Plug the cord into the nearest wall outlet.
RF input that connects to your Cable or VHF/UHF antenna.
Item Description
ffiJ VIDEO IN 1/ This input port can be used as acomposite video input (VIDEO] )or as a
COMPONENT component video input (COMPONENT
1). For composite use, connect the yellow
IN 1
jack to Y Nideo for video and use audio L(mono) and Rfor audio signal. For
(1 080p/1 080i/ component connection, use Y, PB, PR for video signals and also connect the audio L
720p/480p/480i)/ (mono) and Rfor audio signal.
L(MONO)- This TV can auto detect and switch between the VIDEO 1and COMPONENT I
when VIDEO 1 or COMPONENT 1 is connected.
AUDIO-R To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1Selection option then set to Auto.
[L] COMPONENT Component video provides better picture quality than the SVideo and composite
IN 2video.
(1080p/1080i/ Audio connection
is required for the COMPONENT IN ports, connect audio (LlR).
720p/480p/480i)/
L-AUDIO-R
[ID AUDIO OUT
(FIX) UR
[ill AC power cord
[Q] CABLE!
ANTENNA
• An HDMI or Component video (YPBPR) connection is required to view 480i, 480p, 720p, 1080i
and 1080p video formats. 1080124p is available only with
HDMI connection. This TV displays all
picture format types in aresolution
of 1,366 dots x768 lines.
8

Connecting the TV
Cable System or VHF/UHF Antenna System
You can enjoy high-definition and standard-definition digital programming (ifavailable in your
area) along with standard-definition analog programming.
This TV is capable
of receiving unscrambled digital programming for both cable (QAM and
8VSB) and external VHF/UHF antenna (ATSC).
Cable or VHF/UHF (or VHF only)
75-ohm coaxial cable ~ ~ Rear of TV
CABLE/ANTENNA
• It is strongly recommended that you connect the CABLE/ANTENNA input using a75-ohm
coaxial cable to receive optimum picture quality. A300-ohm twin lead cable can easily be affected
by radio frequency interference, resulting in signal degradation.
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna
programming,
as indicated below.
•
NB RF Switch
Cable
~·I· ... crun
Antenna~. iii
c:::1]J.~ Rear of TV
CABLE/ANTENNA
•Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings
for your input signal (see page 30).
(Continued) 9

HD Cable BoxlHD Satellite Box
You can enjoy high-definition programming by subscribing to ahigh-definition cable service or a
high-definition satellite service. Forthe best possible picture, make sure you connect this equipment
to your TV via the HDMI or component video (with audio) input located on the back of your TV.
Shown with HOMI Connection
Rear of TV
HD cable box!
HD satellite box
CATV/Satellite antenna cable
a
1
I 550 ~:
L.r---TT~~:"""::=::'::::""'=""'"
~,-: H_D_Mj_Ca_bl_e ..... 9
CATV/Satellite
antenna cable
HD cable box! I
HD satellite box A
L.r---T-~-" _f~~ ~-. ~:
r
DVI-to-HDMI cable
• If your equipment has aDVI output and not an HDMI output, connect the DVI outputto the
HDMI
IN 1(with DVI-to-HDMI cable or adapter) and connect the audio output to the AUDIO
IN (LIR)
of HDMI IN 1. For details, see page 7.
10

Shown with Component Connection
Rear of TV CATV/Satellite antenna cable
•
HD cable box!
HD satellite box
Component video cable
"----- __ 1 -----+ __
I
Audio cable
PC
Use the TV as amonitor for your PC by connecting an HD15-HD15 cable connection as shown
below. This TV can also be connected to aPC with aDVI or HDMI output. (Refer to the separate
Quick Setup Guide.)
t
HD15-HD15 cable
-- (analog RGB)
Audio cable
(stereo mini plugs)
-------1--
•Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog ROB) and
audio cable (see page 7).
•The TV enters the standby mode automatically when the PC is connected to the TV and no signal
has been output from the PC for more than 30 seconds (see page 34).
11

Connecting Other Equipment
Personal
computer
Blu-ray
Disc Player/ DVD
"PS3" player
Digital
satellite Digital
receiver cable box Audio
system
SERVICE
ONLY
CABLE/ANTENNA
o
,
CABLE/ANTENNA
VCR/Game Digital
Analog audio Digital audio equipment
system recorder
equipment
(AN Receiver/
Home Theater)
Camcorder
•Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
12

Bundling the Connecting Cables
Untie the AC power cord from the plastic cable band and connect the AC power cord to the nearest
wall outlet when all the necessary connection is completed. Use the same plastic cable band to
bundle the connecting cables as illustrated below.
Do not bundle the
AC power cord with other connecting cables. •
When Installing the TVAgainstaWall or Enclosed Area
Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown
below. Avoid operating the TV at temperatures below
41°F (5 °C).
Installed with stand Installed
on the wall
4inches .
(lO<:m)) .•
:' r '1'1 (~b~~~)h'~~' .
: 2 3/8inches
lii1f_ 0 ~~~. ((6~
Leave at least this much space around the set.
[J
Jt1~~~)s
.Leave at least
~ this much space
.~ ... -..- ... - ... -. - ... -:-t4~ .. ln-Gh~e""'S(--1o""'9.m): around the set.
Never install the TV set as follows:
Air circulation is blocked. Air circulation is blocked.
/. //.
/// .
. :>~,\,
'««
;;;YWJ
•Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause
afire.
13

Securing the TV
tSony strongly recommends taking measures to prevent the TV from toppling over.
~ Unsecured TVs may topple and result in property damage, serious bodily injury or even
death.
Preventing the TV from Toppling
:J Secure the TV to awall and/or stand.
QDo not allow children to play or climb on furniture and TV sets.
:J Avoid placing or hanging items on the TV.
oNever install the TV on:
•slippery, unstable and/or uneven surfaces.
•furniture that can easily be used as steps, such as achest
of drawers.
oInstall the TV where it cannot be pulled, pushed, or knocked over.
oRoute all AC power cords and connecting cables so that they are not accessible to curious children.
Recommended Measures to Secure the TV
Consider the following measures when securing your TV to aTV stand (not supplied).
1Secure the stand for the TV.
Make sure the TV stand can adequately support the weight of the TV. Use two angle braces
(not supplied) to secure the stand.
For each angle brace use the appropriate hardware to:
•attach one side
of the angle brace to the wall stud.
•attach the other side
to the TV stand.
Angle braces
Stand
14

2Secure the TV to the stand.
Use the optional hardware listed below (not supplied):
•M4 x
14 mm anchor bolt and M4 nut (screwed into the TV's Table-Top Stand).
• A screw or similar (attach it to the TV stand).
•Rope or chain (strong enough to support the weight
of the TV). Make sure that there is no
excess slack in the rope or chain.
An alternative way to secure the TV
is with an optional Sony Support Belt Kit.
Screw hole
,/ on the Table-
Top Stand
~Screw
3Anchor the TV to the wall.
Use the hardware listed below (not supplied).
•Two anchor bolts, size M4 x10-12 mm (model KDL-26L5000) or M6 x10-12
mm (model
KDL-32L5000). Screw the bolts into the top-most wall-mount holes located on the rear
of
the TV.
•Rope or chain (attach to one anchor bolt).
•Wall-anchor (attach to the wall stud) strong enough to support the weight
of the TV (pass
the rope through the wall-anchor, then attach to the other anchor bolt).
Anchor bolts
Wall-anchor
trl"!!'!-~~:;:~~::l Wall-mount
holes
Rope or
chain
•Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV
model name.
For United States call: 1-800-488-7669 or visit: www.sony.comlaccessories
For Canada call: 1-877-899-7669
•Measure 2provides minimal protection against the TV toppling over. For further protection,
follow all three measures recommended above.
• If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N'm {IS kgf·cm}.
15

Running Initial Setup
During initial setup, you will perform the following:
•Set the language for the On Screen Display (OSD) text
•Choose your viewing environment
•Signal source connection check
•Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup
Guide (supplied) for sample connection diagrams.
1Turn on the TV. The Initial Setup screen will
appear.
2Use the remote control buttons described below to
navigate through the Initial Setup.
INPUTwloe
__ I,
+/+/+/+ buttons:
Allow you to navigate and highlight options where applicable.
obutton:
Allows you to select the highlighted option and advance to the next screen.
3Auto Program will scan for available channels from the signal source directly connected to
the
TV's CABLE/ANTENNA input. Follow the help text provided on the screen to run the
Auto Program.
•When prompted to select Retail or Home, be sure to select
Home for ENERGY STAR compliant mode.
•Select Cancel to stop orcancel the Auto Program. The Auto
Program can be done at later time. To run Auto Program at
later time, press MENU and select the Auto Program under
Channel settings.
•Connect either your cable or antenna
to the TV (you can connect
both using an A-B
RF switch (not supplied); for more details see
page
9.
•Select your preferred aspect ratio for the screen display. Press WIDE to select the Wide Mode or
press MENU and set the Auto Wide to
On under the Screen settings; for more details, see page 23.
16

Operating the TV
Using the Remote Control
To Insert Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching 0
and. on the batteries to the
diagram inside the battery compartment
of
the remote control.
Guidelines to follow
..-
Push to
open •
•Point your remote control directly at the IR sensor
located on your
TV.
•Make sure that no objects are blocking the path
between the remote control and the
IR sensor on your
TV.
•Fluorescent lamps can interfere with your remote
control; try turning offthe fluorescent lamps.
•
If you are having problems with the remote control,
reinsert or replace your batteries and make sure that
they are correctly inserted.
17

Remote Control Button Description
Button Description
[I] DISPLAY Press once to display the banner with channel/program
information you are watching. The banner will time
out in afew seconds or press again to exit.
Press once to display the stored Favorites list.
You
can store up to 10 channels and/or external inputs in
your Favorites list.
Press repeatedly to cycle through the available Wide
Mode settings. See page 23.
~~~~~~--~~~~~-
Press to go back to the previous screen or exit from the
screen when displaying menu items and settings.
~ CC Press to
tum On, tum On when Muting or Off the
Closed Captions (CC).
,--_.~-- - -----_ .. _ .. ,
~ BRAVIA These buttons are used to control the equipment
Sync connected to the TV by using the Control for HOMI
function (not available on all Control for HOMI
equipment). Some other buttons on the remote control
may also operate BRAVIA Sync equipment.
.... (fast reverse): Press to playa program in fast
rewind mode.
~ PLAY: Press to playa program at anormal speed.
II PAUSE: Press to pause playback.
~ (fast forward): Press to playa program in fast
forward mode.
SYNC MENU: Press once to display the Sync'd
HOMI Devices (while aControl for HOMI device is
not selected). Select the
HDMI device and then press
SYNC MENU to display the menu of connected
equipment (not available on all Control for HOMI
equipment).
•STOP: Press to stop playback.
THEATER: Press to tum on and off the Theater
Mode. The picture settings will be set for acinema-
like experience and the audio will be switched to the
audio output
of the attached speakers of your BRAVIA
Sync audio system. Your BRAVIA Sync audio system
must be connected
by an HDMI connection to your TV
(see page
21 for details).
[1] FAVORITES
[§] WIDE
[ill RETURN
[1] ,It'·
4J
,.
~
[l] MENU Press to display the menu with TV functions and
settings. See '"Using the Menus" on page 25.
•The
5, PLAY and CH +buttons have atactile dot. Use them as areference when operating the TV.
18

•
Button Description
[ID
0-9 ENT Press 0-9 to select achannel; the channel changes after
[j]
two seconds. Press ENT to change channels
immediately.
[ID
0Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press
®' 0, CD and ENT.
VOL +/- Press to adjust the volume.
MUTING Press to mute the sound. Press again or press VOL +to
restore the sound.
--- ---"--_. __ ..
POWER Press to turn on and off the TV.
INPUT Press to display the list of External Inputs and TV
mode. Press repeatedly to toggle through the inputs.
See page 24.
[H]
+/+/./+ Press +/+/./+ to move focus/highlight. Press Gto
Gselect/confirm an item.
~TOOLS Press to display alist
of convenient functions and
menu shortcuts. The TOOLS menu items vary based
on current input and content.
[§]
CH +/- Press to scan through channels. To scan quickly
through channels, press and hold down either CH +/-.
[Z]
JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
19

---17
'\
POWER I
&-T-@
:~A=NEL I
I6
r
!
I
I
I
~
-
!-
I
V0I:Y
ME
~
+I
-...
I / " T
10
~-
....
INPUT
Im
PIC OFF ITIMER STANDBY POWER ]
[I]
T ~ ~ ~
!MENU!
)
TV Controls and Indicators
Item Description
Lights up in orange when the sleep timer is set.
Lights up in green when the Power Saving
is set to Picture Off.
Lights up
in red when your TV is in PC power saving mode.
[] (IR) Infrared Receives IR signal from the remote control.
Receiver
[2] PIC OFFI
TIMER LED
~ STANDBY
LED
@] POWER LED Lights up in green when the TV is turned on.
~ POWER Press to tum on and off the TV.
rnJ -CHANNEL +Press to scan through channels. To scan quickly through channels, press and hold down
either CH
-1+. In the menu screen, these buttons serve as up/down buttons.
Press to adjust the volume.
In the menu screen, these buttons serve as left/right buttons.
Press to display the list
of external inputs. Press repeatedly to toggle through the inputs.
In the menu screen, this button serves as confirming the selection or setting.
Press
to display menu with TV functions and settings (see "Using the Menus" on page 25).
Outputs audio signal.
[l] -VOLUME +
rnJO
INPUT
[ill MENU
[Q] Speaker
•Inputs can be changed by pressing +1+ and 0while the list of external inputs menu is
displayed.
•For more information about setting up the external inputs labels and the Skip feature, see page 35.
•The
CHANNEL +button has atactile dot. Use it as areference when operating the TV.
•Make sure that the TV is completely switched off before unplugging the power cord.
20