Sony Bravia XR-65X95J User manual

9-888-797-42
LCD TV
Sony EMCS (M) Sdn. Bhd., HES-M
© 2021.08
ORIGINAL MANUAL ISSUE DATE: 2021.06
Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information
for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-
date before using it.
Model:
XR-65X95J XR-75X95J
XR
-85X95J
Dismantling Information forUse
by ProfessionalRecyclers

MODEL LISTS
Model Remote Destination
XR-65X95J RMF-TX621E CEI, UKA
RMF-TX520E CEP
XR-75X95J RMF-TX621E CEI, UKA
RMF-TX520E CEP
XR-85X95J RMF-TX621E CEI, UKA
RMF-TX520E CEP
Remote
RMF-TX621E RMF-TX520E

1 LIST OF ITEMS TO BRING
1. Screwdriver (e.g. #2 Phillips Screwdriver)
2. Multimeter
3. ESD Wrist Straps
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
6. Service Manual (Unique) (for remove & replace details)
2 OPTIONAL EQUIPMENT
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
2. Flashlight
3. Service Manual (Common) (for t/shooting information)
For Surface Mounted Parts/Connectors:
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
Plastic or Metal Ruler
(In case of Metal ruler, wrap in tape
(L=50mm) for prevent scratches)
TOOLS & EQUIPMENT
3

4
SAFETY NOTES

5
DISSASSEMBLY AND REMOVAL CAUTION 65”

6
DISSASSEMBLY AND REMOVAL CAUTION 65”

7
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4 EXPLODED VIEW AND PART LIST REF.
NO PART NO. DESCRIPTION REMARKS
15-025-370-01 STAND COVER LR (GMN)A STAND COVER L (GMN)” and “STAND COVER R
(GMN)” are included
2 5-026-237-11 COVER, AC TML (2L GMN) -
3 5-026-236-11 COVER TML H(2L GMN) -
4 5-026-235-12 COVER TML V(2L GMN) -
1
2
3
41
PART LIST 65”

8
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4 EXPLODED VIEW AND PART LIST
Stand
26 27
3
1
2
4
5
6
9
10
78
14
15
16
17
12
24 13
11
18
19
20
21
21
22
25
23
PART LIST 65”

9
REF. NO PART NO. DESCRIPTION REMARKS
11-010-717-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN2(TCON)(1)
21-010-718-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN3(TCON)(1)
31-010-608-11 CONNECTOR ASSY 15P CN6601(PSU)-CN1003(LD)(1)
41-010-609-11 CONNECTOR ASSY 28P CN6401(PSU)-CN1700(B)-J105(TCON)(1)
51-010-610-11 CONNECTOR ASSY 10P CN6610(B)-SP(1)
61-010-709-11 FLEXIBLE FLAT CABLE 20P/25P CN102(H)-CN1200(B)-CN3803(B)-BT(1)
71-010-711-11 FLEXIBLE FLAT CABLE 30P CN6200(B)-CN1000(LD)(1)
2
1
3
4
5
7
6
HARNESS/CABLES 65”

REF. NO PART NO. DESCRIPTION REMARKS
5 1-912-741-11 POWER-SUPPLY CORD (WITH CONN.) CEI, CEP Cable
5 1-912-983-12 POWER-SUPPLY CORD (CONN.) UKA Cable
14 A-5026-274-A COMPL SVC BM5S21_AG_EUUK Printed Circuit Board, incl. capacitors
19 1-006-108-31 G02Q - STATIC CONVERTER(TV) Internal Power Supply
25 A-503-2151-A P-MOD (YDBO065DBU02) Liquid Crystal Display
10
PART LIST 65”

11
DISSASSEMBLY AND REMOVAL CAUTION 75”

12
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
2-4 EXPLODED VIEW AND PART LIST REF.
NO PART NO. DESCRIPTION REMARKS
15-025-370-01 STAND COVER LR (GMN)A STAND COVER L (GMN)” and “STAND
COVER R (GMN)” are included
2 5-024-032-11 COVER, AC TML (GMN) -
3 5-025-371-01 STAND COVER C (GMN)A STAND COVER CL (GMN)” and “STAND
COVER CR (GMN)” are included
4 5-024-029-11 COVER TML H(3L GMN) -
5 5-024-028-11 COVER TML V(3L GMN) -
2
3
34
5
1
1
PART LIST 75”

13
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
2-4 EXPLODED VIEW AND PART LIST
Stand
26 27
3
1
2
4
5
6
9
10
78
14 15
16
17
12
23
13
11
18 19
20
21
21
22
25
24
PART LIST 75”

14
REF. NO PART NO. DESCRIPTION REMARKS
11-010-695-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN2(TCON)(1)
21-010-696-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN3(TCON)(1)
31-010-601-11 CONNECTOR ASSY 15P CN6601(PSU)-CN1003(LD)(1)
41-010-602-11 CONNECTOR ASSY 28P CN6401(PSU)-CN1700(B)-J105(TCON)(1)
51-010-604-11 CONNECTOR ASSY 10P CN6610(B)-SP(1)
61-010-689-11 FLEXIBLE FLAT CABLE 20P/25P CN102(H)-CN1200(B)-CN3803(B)-BT(1)
71-010-691-11 FLEXIBLE FLAT CABLE 30P CN6200(B)-CN1000(LD)(1)
2
1
3
4
5
7
6
HARNESS/CABLES 75”

REF. NO PART NO. DESCRIPTION REMARKS
5 1-912-741-11 POWER-SUPPLY CORD (WITH CONN.) CEI, CEP Cable
5 1-912-983-12 POWER-SUPPLY CORD (CONN.) UKA Cable
14 A-5026-274-A COMPL SVC BM5S21_AG_EUUK Printed Circuit Board, incl. capacitors
19 1-006-109-31 G03Q - STATIC CONVERTER(TV) Internal Power Supply
25 A-5039-502-A P-MOD (YDBO075DAS02) Liquid Crystal Display
15
PART LIST 75”

16
DISSASSEMBLY AND REMOVAL CAUTION 85”

17
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
3-4 EXPLODED VIEW AND PART LIST
REF.
NO PART NO. DESCRIPTION REMARKS
15-025-370-01 STAND COVER LR (GMN)A Including STAND COVER L (GMN) & STAND
COVER R (GMN)
2 5-024-032-11 COVER, AC TML (GMN) -
3 5-025-371-01 STAND COVER C (GMN)A Including STAND COVER CL (GMN) & STAND
COVER CR (GMN)
4 5-025-369-01 COVER TML (4L GMN)A Including COVER TML V(4L GMN) & COVER
TML H(4L GMN)
3
1
2
3
4
4
1
PART LIST 85”

18
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
3-4 EXPLODED VIEW AND PART LIST
Stand
26 27
*Only on limited region / country / TV model
3
1
2
4
5
6
9
10
78
14
15
16
17
12
24
13
11
18
19
20
21
21
22
25
23
PART LIST 85”

19
REF. NO PART NO. DESCRIPTION REMARKS
11-010-707-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN2(TCON)(1)
21-010-708-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN3(TCON)(1)
31-010-605-11 CONNECTOR ASSY 15P CN6601(PSU)-CN1003(LD)(1)
41-010-606-11 CONNECTOR ASSY 28P CN6401(PSU)-CN1700(B)-J105(TCON)(1)
51-010-607-11 CONNECTOR ASSY 10P CN6610(B)-SP(1)
61-010-699-11 FLEXIBLE FLAT CABLE 20P/25P CN102(H)-CN1200(B)-CN3803(B)-BT(1)
71-010-701-11 FLEXIBLE FLAT CABLE 30P CN6200(B)-CN1000(LD)(1)
2
1
3
4
5
7
6
HARNESS/CABLES 85”

REF. NO PART NO. DESCRIPTION REMARKS
5 1-912-741-11 POWER-SUPPLY CORD (WITH CONN.) CEI, CEP Cable
5 1-912-983-12 POWER-SUPPLY CORD (CONN.) UKA Cable
14 A-5026-274-A COMPL SVC BM5S21_AG_EUUK Printed Circuit Board, incl. capacitor
19 1-006-109-31 G03Q - STATIC CONVERTER(TV) Internal Power Supply
25 A-5030-086-A P-MOD (YDBO085DAU02) Liquid Crystal Display
20
PART LIST 85”