Sony GRAND WEGA KF-50SX200 User manual

CHASSIS LE-3ASERVICE MANUAL
MODEL COMMANDER DEST.
–––––––– –––––––––––––– ––––––
LCD PROJECTIONTV
KF-50SX200 RM-905 AEP
KF-50SX200K RM-905 OIRT
KF-50SX200U RM-905 UK
PROG
MENU
TV
MODE
REC
VCR
DVD
RM-905
OK
TV

– 15 –
KF-50SX200/50SX200K/50SX200U
KRM-905
SECTION 3
ELECTRICAL ADJUSTMENTS
3-1. ADJUSTMENTS WITH COMMANDER
Service adjustment to this model can performed with the supplied
remote commander RM-905.
3-1-1. How to Select Each Mode
1. Selection of Mode between PAL and NTSC
PAL mode : Enter PAL signal with color burst.
NTSC mode: Enter NTSC signal with color burst. (VIDEO
input only)
2. Selection of Picture Mode
1) Press “ (GREEN)” button on the commander.
2) Press vor Vkey on the joystick to select picture mode and
press “ (OK)” button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
3. Selection of Screen Mode
1) Press “ (BLUE)” button on the commander.
2) Press vor Vkey on the joystick to select screen mode and
press “ (OK)” button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
4. Displaying Multi PIP Mode
1) Press “ (YELLOW)” button on the commander.
2) Press it once more, normal screen comes back. (In the TT
mode, the menu is switched to the Service menu.)
5. Displaying PAP Mode
1) Press “ ” button on the commander.
2) Press it once more, normal screen comes back. (In the TT
mode, the menu is switched to the Service menu.)
3-1-2. How to EnterTT Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on commander as follows, and the TT
mode will be selected.
“TT - -” will appear in the top right corner of the screen.
Other status information will also be displayed.
3. If “ (TV MODE)” button or “-” + “-” button is pressed,
the set exits from the TT mode and returns to normal TV mode.
3-1-3. How to Enter Service Menu
1. Select TT mode.
2. Press “MENU” button on the commander once, and normal
menu screen will appear, or press it once more, and the fol-
lowing service menu screen will appear.
3. Following the screen, press vor Vkey on the joystick to
select the desired item, and press Bkey to enter the selected
item.
4. Press vor Vkey on the joystick to change data of each item,
and press “ (OK)” button to write changed data.
(Except Projector Engine mode)
5. To return from each item, press bkey on the joystick. Or, to
return to the TT mode, press the “MENU” button.
(Except Projector Engine mode)
RM-905
PROG
MENU
TV
MODE
REC
VCR
DVD
RM-905
OK
TV
MUTE
TV MODE
JOYSTICK
PAP
VOLUME +
MENU
SCREEN
MODE
Wide/Zoom/
14:9/4:3/
Smart
PICTURE
MODE
Live/Personal/
Movie/Game
ON SCREEN
DISPLAY
TV STANDBY
PIP
Enter the
“TT MODE”
5
(DIGIT 5) (VOLUME +) (TV MODE)ON SCREEN
DISPLAY
( )
Service AE5(A)
Initialising
Reset Devices
Monitoring
Device Register Setting
Special Adjustment
Select : v V Next menu : B

–16 –
KF-50SX200/50SX200K/50SX200U
KRM-905
Model Setting
1 KV-29FX60
2 KV-29FC60
3 KV-29FS60
4 KV-28FX60
5 KV-32FX60
6 KV-32FS60
7 KV-28FC60
8 KV-32FC60
9 KP-44PS3
10 KP-51PS3
11 KF-50SX200
12 KDP-44NX1U
13 KDP-51NX1U
14 KP-48PS1/PS2
15 KP-53PS1/PS2
16 KP-61PS1/PS2
17 KP-44PS2
18 KP-51PS2
19 KF-50SX100
BLACK = No conformity
GREEN = Compatible Model
RED = Conformity for all data
Select : v V Last menu : bSet Model : B
• Initialising bModel Setting
• Initialising bBasic Setting
Basic Setting
No Descr. Min Max Data
1 Sys. B/G OFF ON ON
2 Sys. D/K OFF ON ON
3 Sys. L OFF ON ON
4 Sys. I (UK) OFF ON ON
5 Sys. I (IRL) OFF ON OFF
6 TXT Nat.Option 1 4 3
7 Simple PAT OFF ON ON
8 16 : 9 CRT OFF ON ON
9 Sub-Woofer OFF ON ON
10 Auto Stand-By OFF ON ON
11 Comb-Filter OFF ON ON
12 Auto YC det OFF ON ON
13 Auto Comb det OFF ON ON
14 AV2 Available OFF ON ON
15 AV3 Available OFF ON ON
16 AV4 Available OFF ON ON
17 AV3 Front&Rear OFF ON OFF
18 SECAM Tape OFF ON ON
19 AV1 SoundMute OFF ON OFF
Select : v V Last menu : bEnter Item : B
• Initialising bFeature Setting
Feature Setting
No Descr. Min Max Data
1 PAP OFF ON ON
2 PAT OFF ON ON
3 INDEX OFF ON ON
4 EPG OFF ON ON
5 Full EPG OFF ON ON
6 PictBoostBypass OFF ON OFF
Select : v V Last menu : bEnter Item : B
Reset Devices
Colour Decoder 1
Colour Decoder 2
Audio/Video Switch
MID-X
External PLL MID-X
Gate Array Chip
AutoWide
Sound
Picture Booster
MCP
Analog NR
Select : v V Last menu : bReset Dev. : B
• Reset Devices
3-1-4. Screen Display for Service Menu
If each item of service menu is selected, the following screen is
displayed.
Initialising
Model Setting
Destination Setting
Basic Setting
Feature Setting
Select : v V Next menu : B
• Initialising
Destination Setting
Multi
A
B
D
E
K
R
U
GA
BLACK = No conformity
GREEN = Compatible Destination
RED = Conformity for all data
Select : v V Last menu : bSet Dest. : B
• Initialising bDestination Setting

–17 –
KF-50SX200/50SX200K/50SX200U
KRM-905
Device Register Setting
Colour Decoder 1
Colour Decoder 2
Audio/Video Switch
MID-X
External PLL MID-X
Gate Array Chip
Autowide
Sound
Projector Engine
Picture Booster
MCP
Analog NR
Select : v V Next menu : B
• Device Register Setting
Monitoring
Device Status Monitor
Error Monitor
LCD-Engine error menu
Production Monitor
NVM Monitor
Format Monitor
CNI Monitor
Select : v V Next menu : B
• Monitoring
• Device Register Setting bColour Decoder 1
Colour Decoder 1
No Descr. Def. Min Max Data
1 TINT 31 0 63 31
2 SUB COLOUR 7 0 15 7
3 SUB CONTR 7 0 15 7
4 SHARP GAIN 8 0 15 8
5 Y-OUT LEV. 35 0 63 35
6 C-OUT LEV. 45 0 63 45
7 Y-DL 8 0 10 8
8 Cr OFF.1 7 0 15 7
9 Cb OFF.1 7 0 15 7
10 Cr OFF.2 7 0 15 7
11 Cb OFF.2 7 0 15 7
12 V CD FREQ 3 0 7 3
13 V CD MODE 1 0 3 1
14 MVM OFF OFF ON OFF
15 S R-Y ADJ 7 0 15 7
16 S B-Y ADJ 2 0 15 2
17 BELL/HPF 2 0 3 2
18 BELL F0 OFF OFF ON OFF
19 S GP 0 0 3 0
Select : v V Last menu : bEnter Item : B
• Device Register Setting bColour Decoder 2
Colour Decoder 2
No Descr. Def. Min Max Data
1 TINT 31 0 63 31
2 SUB COLOUR 7 0 15 7
3 SUB CONTR 7 0 15 7
4 SHARP GAIN 8 0 15 8
5 Y-OUT LEV. 35 0 63 35
6 C-OUT LEV. 45 0 63 45
7 Y-DL 8 0 10 8
8 Cr OFF. 1 7 0 15 7
9 Cb OFF. 1 7 0 15 7
10 Cr OFF. 2 7 0 15 7
11 Cb OFF. 2 7 0 15 7
12 V CD FREQ 3 0 7 3
13 V CD MODE 1 0 3 1
14 MVM OFF OFF ON OFF
15 S R-Y ADJ 7 0 15 7
16 S B-Y ADJ 2 0 15 2
17 BELL/HPF 2 0 3 2
18 BELL F0 OFF OFF ON OFF
19 S GP 0 0 3 0
Select : v V Last menu : bEnter Item : B
Audio/Video Switch
No Descr. Def. Min Max Data
• Device Register Setting bMID-X
MID-X
No Descr. Def. Min Max Data
1 M H POS 8 –31 31 8
2 S H POS 2 –8 8 2
3 D YS SEL 1 0 3 1
4 D YS DELAY 7 0 7 7
5 D SYNC MOD ON OFF ON ON
6 Text Sharp OFF OFF ON OFF
Select : v V Last menu : bEnter Item : B
• Device Register Setting bAudio/Video Switch

–18 –
KF-50SX200/50SX200K/50SX200U
KRM-905
Sound
No Descr. Def. Min Max Data
1 Carr.-Mute ON OFF ON ON
2 SCART1 Vol 79 0 127 79
3 SCART2 Vol 79 0 127 79
4 SCART-Pr. 27 0 127 27
5 I2S1-Pr. 16 0 127 16
6 I2S2-Pr. 16 0 127 16
7 FM Pr. 27 0 127 27
8 BG Nic.Pr. 53 0 127 53
9 L Nic. Pr. 59 0 127 59
10 DK Nic.Pr. 53 0 127 53
11 I Nic. Pr. 97 0 127 97
12 Irl NicPr. 97 0 127 97
13 Subw. Vol. -2 -127 0 -2
14 Bass Offs 0 -3 3 0
15 TrebleOffs 0 -3 3 0
16 Loudn.Offs 0 0 9 0
17 HP-VolOffs -2 -5 5 -2
18 M-S Limit 30 -128 127 30
19 M-B Limit -30 -128 127 -30
20 S-M Limit 12 -128 127 12
21 S-B Limit -20 -128 127 -20
22 B-M Limit -12 -128 127 -12
23 B-S Limit 20 -128 127 20
24 Err. Max 40 0 255 40
25 Err. Min 18 0 255 18
26 Vol.Offset 0 -6 0 0
27 High Dev. OFF OFF ON OFF
28 FIR2 500k ON OFF ON ON
29 Loud.Gain 0 0 68 29
30 Loud.Mode 50 0 8 8
31 Virt.Surr. OFF OFF ON OFF
32 Spat.Eff. 64 0 127 0
33 Virt.Eff. 90 0 127 90
34 Virt.Mode 6 5 6 6
35 Noise Gen. OFF OFF ON OFF
36 Channel 10 10 13 10
Select : v V Last menu : bEnter Item : B
• Device Register Setting bGate Array Chip
Gate Array Chip
No Descr. Def. Min Max Data
1 SMART OFF OFF ON OFF
2 ROM Curve 0 0 1 0
3 H Offset 0 -15 15 0
Select : v V Last menu : bEnter Item : B
• Device Register Setting bExternal PLL MID-X
External PLL MID-X
No Descr. Def. Min Max Data
1 VCO7-0PAL 184 0 255 184
2 VCO7-0NTSC 172 0 255 172
3 VCO11-8 6 0 15 6
4 DIV1,2,4,8 2 0 3 2
5 Fine Delay 0 0 63 0
6 Coar.Delay 0 0 3 0
7 Ch. Pump 0 0 3 0
8 PD Pol. ON OFF ON ON
9 DSync Wdth 3 0 3 3
10 Dsync Del OFF OFF ON OFF
11 Sync Pol ON OFF ON ON
12 DSync Pol ON OFF ON ON
13 Clk En ON OFF ON ON
14 NClk En OFF OFF ON OFF
15 Clk/2 En OFF OFF ON OFF
16 NClk/2 En OFF OFF ON OFF
17 DSync En ON OFF ON ON
18 Unlock En OFF OFF ON OFF
19 VCO Bypass ON OFF ON ON
20 Synth Pwr ON OFF ON ON
21 Rdout Pwr OFF OFF ON OFF
22 DIVOUT En ON OFF ON ON
23 DSync Byp OFF OFF ON OFF
24 DSync Hold OFF OFF ON OFF
Select : v V Last menu : bEnter Item : B
• Device Register Setting bSound
• Device Register Setting bAuto wide
Auto wide
No Descr. Def. Min Max Data
1 Upara ON OFF ON ON
2 Upthin OFF OFF ON OFF
3 Enjtoz OFF OFF ON OFF
4 X149j ON OFF ON ON
5 Syncslc OFF OFF ON OFF
6Tm 1 0 3 1
7 Uprlvl OFF OFF ON OFF
8 Ofslvl OFF OFF ON OFF
9 Alpf 3 0 3 3
10 eddec2 3 0 3 3
11 Lnstblz ON OFF ON ON
12 Lnhys OFF OFF ON OFF
13 Drkpri ON OFF ON ON
Select : v V Last menu : bEnter Item : B
Picture Booster
No Descr. Def. Min Max Data
1 DEM OFF OFF ON OFF
Select : v V Last menu : bEnter Item : B
• Device Register Setting bPicture Booster

–19 –
KF-50SX200/50SX200K/50SX200U
KRM-905
Analog NR
No Descr. Def. Min Max Data
• Device Register Setting bAnalog NR
MCP
No Descr. Def. Min Max Data
1 Contrast 46 0 63 46
2 Hue 32 0 63 32
3 System 1 0 3 1
4 Colour 29 0 63 24
5 Brightness 55 0 63 55
6 Sharpness 31 0 63 29
7 R-Drive 42 0 63 42
8 D-Col OFF OFF ON OFF
9 G-Drive 42 0 63 42
10 B-Drive 42 0 63 42
11 R-Cutoff 20 0 63 20
12 G-Cutoff 20 0 63 20
13 B-Cutoff 20 0 63 20
14 H-Width 0 0 3 0
15 CR-Offset 1 2 0 15 11
16 CB-Offset 1 2 0 15 11
17 Sub-Contr. 7 0 15 7
18 Sub-Colour 7 0 15 7
19 Sub-Hue 7 0 15 7
20 CTI-Level 1 0 3 1
21 R-Y/R 10 0 15 10
22 R-Y/B 15 0 15 15
23 G-Y/R 10 0 15 10
24 G-Y/B 7 0 15 7
25 Gamma 3 0 15 3
26 P-Abl 15 0 15 15
27 BLK-Bottom 5 0 15 5
28 Sub-Sharp 1 0 3 1
29 Sharp.F0 2 0 3 2
30 Pre/Over 1 0 3 1
31 LTI-Level 1 0 3 1
32 DC-Tran 0 0 3 0
33 DPIC-Level 0 0 3 0
Select : v V Last menu : bEnter Item : B
• Device Register Setting bMCP
Special Adjustment
No Descr. Min Max Data
1 RGB Level 0 7 0
2 RGB Gain 0 31 23
3 RGB PAT Level 0 7 0
4 RGB PAT Gain 0 31 18
5 Extra FW 0 255 255
6 EPG ChkS Check OFF ON ON
7 Slicer High OFF ON ON
8 FCW Wide OFF ON ON
9 Mpeg NR OFF ON OFF
10 Notch Filter OFF ON OFF
11 NLD step -7 0 -1
12 PKD step -15 0 -5
13 CRD step 0 15 3
14 SHP step -7 0 -3
15 COL step -7 0 -1
16 NTSC AutoYc AV2 OFF ON OFF
17 NTSC AutoYc AV3 OFF ON OFF
18 RGB Disable OFF ON OFF
19 Telop C/M OFF ON ON
20 Intern GD OFF ON ON
21 AV2 YC mix out OFF ON OFF
22 Line 318 TXT OFF ON ON
23 L Gating Main OFF ON OFF
24 L Gating Sub OFF ON OFF
25 Audio Gain Sub OFF ON OFF
26 Auto Mute Sub OFF ON ON
Select : v V Last menu : bEnter Item : B
• Special Adjustment

–20 –
KF-50SX200/50SX200K/50SX200U
KRM-905
D9512 IM 0 V-ST-POS 9 0-255 V START POSITION CXD9512
1 H-ST-POS 97 0-255 H START POSITION
2 SUB CON 32 0-63 SUB CONTRAST LEVEL
3 SUB BRT 12 0-63 SUB BRIGHT LEVEL
4 V BLKT H 0 0-255 V BLANKING POSITION TOP
5 V BLKT L 0 0.-3 V BLANKING POSITION TOP2
6 V BLKB H 0 0-255
V BLANKING POSITION BOTTOM
7 V BLKB L 0 0-3
V BLANKING POSITION BOTTOM 2
8 H BLKL H 0 0-255 H BLANKING POSITION LEFT
9 H BLKL L 0 0-3 H BLANKING POSITION LEFT 2
10 H BLKR H 0 0-255 H BLANKING POSITION RIGHT
11 H BLKR L 0 0-3
H BLANKING POSITION RIGHT 2
12 ASL SW 0 0, 1 ASL SWITCH
13 ASL SEL 0 0-3 ASL SELECT
14 B PIC LV 0 0-15 BLUE PICASL LEVEL
15 B BRT LV 15 0-15 BLUE BRTASL LEVEL
16 G PIC LV 0 0-15 GREEN PICASL LEVEL
17 G BRT LV 15 0-15 GREEN BRTASL LEVEL
18 R PIC LV 0 0-15 RED PICASL LEVEL
19 R BRT LV 15 0-15 RED BRTASL LEVEL
20 PIC AREA 7 0-7 PICASL AREA
21 BRT AREA 7 0-7 BRTASL AREA
22 PIC ST 0 0-3 PICASL START TIMING
23 BRT ST 0 0-3 BRTASL START TIMING
24 PRE SL 3 0-3 PRE SLOPE
25 POST SL 3 0-3 POST SLOPE
26 APC MODE 2 0-2 APC MODE
27 APC SW 1 0, 1 APC SWITCH
28 APC TH 10 0-255 APC THRESHOLD
29 APC LIMT 30 0-63 APC LIMITTER
30 APC LEV 60 0-255 APC LEVEL
LIVE PERSONAL MOVIE GAME
31 G-PICT 100 69 66 69 0-100 PICTURE
32 G-BRIGHT 51 51 51 51 0-100 BRIGHT
D9512 TG 0 INV CTL 0 0, 1 INVERT CONTROL CXD9512
1 POS CTL 13 0-15 POSITION CONTROL
2 H POS 9 0-255 TG H POSITION
3 V POS H 4 0-255 TG V POSTION H
4 V POS D 30 0-255 TG V POSITION DOT
5 HST POL 0 0, 1 HST POLARITY
6 HCK W 0 0, 1 HCK WIDTH
7 HST POS 15 0-63 HST POSITION
8 HCK POL 1 0, 1 HCK POLARITY
9 HCK A-INV 0 0, 1 HCK AUTO INVERT
10 VST POL 0 0, 1 VST POLARITY
11 VST A-INV 0 0, 1 VST AUTO INVERT
12 HST PHA 1 0-15 HST PHASE
13 VCK POL 0 0, 1 VCK POLARITY
14 VST POS 0 0-127 VST POSITION
15 ENB POS 23 0-255 ENB POSITION
16 ENB W 40 0-255 EMB POSITION
17 BLK ON 0 0, 1 BLK ON
18 BLK POL 0 0, 1 BLK POLARITY
19 PCG POS 2 0-63 PCG POSITION
20 PCG B-OR 0 0, 1 PCG BLK OR
21 PCG B-SEL 0 0, 1 PCG BLK SELECT
22 PCG W 3 0-63 PCG WIDTH
23 PRG POS 2 0-63 PRG POSION
24 PRG B-OR 0 0, 1 PRG BLK OR
25 PRG B-SEL 0 0, 1 PRG BLK SELECT
26 PRG W 9 0-63 PRG WIDTH
27 BLK POS 0 0-255 BLK POSTION
28 BLK W 0 0-255 BLK WIDTH
29 CLR W 0 0-255 CLR WIDTH
3-1-5. Service List (Projector Engine)
Category Item Adjustment Standard Data Note Device
number item data range
D9512TG
Category Item Adjustment Standard Data Note Device
number item data range
D9512 IM
: Fixed data

–21 –
KF-50SX200/50SX200K/50SX200U
KRM-905
D9512 TES
0 REF PER 1 0, 1 REFRESH PERMISSION CXD9512
1 REF LENG 0 0-7 REFRESH LENGTH
2 G-LUT SW 0 0, 1 GAMMA LUT THROUGH
3 CORR WGT 2 0-3 CORRECT WEIGHT
4 SHAD SW 0 0, 1 SHADING SWITCH
5 3D-G SW 1 0, 1 3D GAMMA SWITCH
6 3D-G Z 0 0, 1 3D GAMMA MODE Z
7 3D-G VH 0 0, 1 3D GAMMA MODE VH
8 3D-G BS 1 0, 1 3D GAMMA BLOCK SIZE
9 AGC P SW 1 0, 1 AGC PULSE SWITCH
10
AGC SHP POS
43 0-127 AGC SH PULSE POSITION
11
AGC SHP SEL
1 0-3 AGC SH PULSE SELECT
12
AGC SHP W
2 0-63 AGC SH PULSE WIDTH
D9512 WB
0 B GAIN 127 0-255 W/B GAIN BLUE CXD9512
1 G GAIN 127 0-255 W/B GAIN GREEN
2 R GAIN 127 0-255 W/B GAIN RED
3 B BIAS 85 0-255 W/B BIAS BLUE
4 G BIAS 85 0-255 W/B BIAS GREEN
5 R BIAS 85 0-255 W/B BIAS RED
6 B GAIN H 143 0-255 W/B GAIN BLUE
7 G GAIN H 125 0-255 W/B GAIN GREEN
8 R GAIN H 130 0-255 W/B GAIN RED
9 B BIAS H 127 0-255 W/B BIAS BLUE
10 G BIAS H 130 0-255 W/B BIAS GREEN
11 R BIAS H 128 0-255 W/B BIAS RED
12 B GAIN L 115 0-255 W/B GAIN BLUE
13 G GAIN L 125 0-255 W/B GAIN GREEN
14 R GAIN L 144 0-255 W/B GAIN RED
15 B BIAS L 128 0-255 W/B BIAS BLUE
16 G BIAS L 127 0-255 W/B BIAS GREEN
17 R BIAS L 120 0-255 W/B BIAS RED
Category Item Adjustment Standard Data Note Device
number item data range
D9512 WB
D9512 TPN
0
T-PATN SW
0 0, 1 TEST PATTERN SWITCH CXD9512
1 T-SIG SEL 1 0-7 TEST SIGNAL SELECT
2 PATN DIR 1 0, 1 PATTERN DIRECTION
3 SIG LV DIR 0 0, 1 SIGNAL LEVEL DIRECTION
4
T-PATN PIT
144 0-255 TEST PATTERN PITCH
5 B-LV 25 0-63 BLUE TEST PATTERN LEVEL
6 G-LV 25 0-63 GREEN TEST PATTERN LEVEL
7 R-LV 25 0-63 RED TEST PATTERN LEVEL
8
T-PATN RGB
4 0-7 RGB TEST ENABLE
Category Item Adjustment Standard Data Note Device
number item data range
D9512TPN
Category Item Adjustment Standard Data Note Device
number item data range
D9512TES
D9512 TFR
0 CRIP 1 0, 1 FRAME CRIP CXD9512
1 CUR TOP 0 0, 1 FRAME CURSOR TOP
2 CUR BOT 0 0, 1 FRAME CURSOR BOTTOM
3 CUR L 0 0, 1 FRAME CURSOR LEFT
4 CUR R 0 0, 1 FRAME CURSOR RIGHT
5 POS TOP 0 0-255 FRAME POSITION TOP
6 POS BOT 255 0-255 FRAME POSITION BOTTOM
7 POS L 0 0-255 FRAME POSION LEFT
8 POS R 255 0-255 FRAME POSITION RIGHT
9 OSD B 25 0-31 BLUE OSD LEVEL
10 OSD G 25 0-31 GREEN OSD LEVEL
11 OSD R 25 0-31 RED OSD LEVEL
12 OSD YM 0 0-7 PICTURE HALF TONE LEVEL
13 OSD I 3 0-7 OSD HALF TONE LEVEL
Category Item Adjustment Standard Data Note Device
number item data range
D9512TFR

–22 –
KF-50SX200/50SX200K/50SX200U
KRM-905
PLL-C-N/P
0 VCOL 248 0-255 COUNTER L
1 VCOH 5 0-15 COUNTER H
2 DIV 2 0-3 DIVIDER
3 CODL 0 0-3 DELAY
4 FIDL 15 0-31 FINE DELAY
5 PPOL 1 0, 1
PHASE COMP. INPUT POLARITY SET
6 CPMP 2 0-3 CHARGE PUMP
7 UNLO 1 0, 1 UNLOCK OUT ON/OFF
8 DSYN 1 0, 1 DELAY SYNC ON/OFF
9 CL2 1 0, 1 1/2 TTL CLOCK ON/OFF
10 DSYP 0 0, 1
DELAY SYNC OUTPUT POLARITY
11 SYP 0 0, 1 INPUT SYNC POLARITY
GAMMA 0 ADJ ON 0 0, 1 INVERT CONTROL
1 GAMMA R0 255 0-255 GAMME ADJ (R)
2 GAMMA R1 255 0-255 GAMME ADJ (R)
3 GAMMA R2 255 0-255 GAMME ADJ (R)
4 GAMMA R3 255 0-255 GAMME ADJ (R)
5 GAMMA R4 255 0-255 GAMME ADJ (R)
6 GAMMA R5 255 0-255 GAMME ADJ (R)
7 GAMMA R6 255 0-255 GAMME ADJ (R)
8 GAMMA R7 255 0-255 GAMME ADJ (R)
9 GAMMA G0 255 0-255 GAMME ADJ (G)
10 GAMMA G1 255 0-255 GAMME ADJ (G)
11 GAMMA G2 255 0-255 GAMME ADJ (G)
12 GAMMA G3 255 0-255 GAMME ADJ (G)
13 GAMMA G4 255 0-255 GAMME ADJ (G)
14 GAMMA G5 255 0-255 GAMME ADJ (G)
15 GAMMA G6 255 0-255 GAMME ADJ (G)
16 GAMMA G7 255 0-255 GAMME ADJ (G)
17 GAMMA B0 255 0-255 GAMME ADJ (B)
18 GAMMA B1 255 0-255 GAMME ADJ (B)
19 GAMMA B2 255 0-255 GAMME ADJ (B)
20 GAMMA B3 255 0-255 GAMME ADJ (B)
21 GAMMA B4 255 0-255 GAMME ADJ (B)
22 GAMMA B5 255 0-255 GAMME ADJ (B)
23 GAMMA B6 255 0-255 GAMME ADJ (B)
24 GAMMA B7 255 0-255 GAMME ADJ (B)
Category Item Adjustment Standard Data Note Device
number item data range
GAMMA
LCD-DR 0 FRP CNT 0 0, 1 FR PULSE CONT
1 R VCOM 127 0-255 V COM ADJ (R)
2 R ODD VR 24 0-255 ODD ADJ (R)
3 R EVEN VR 24 0-255 EVEN ADJ (R)
4
R DLY CNT
127 0-255 DLY CONT (R)
5
R DA VSET
44 0-255 D/A VOLTAGE SET (R)
6 G VCOM 127 0-255 V COM ADJ (G)
7 G ODD VR 194 0-255 ODD ADJ (G)
8
G EVEN VR
24 0-255 EVEN ADJ (G)
9
G DLY CNT
127 0-255 DLY CONT (G)
10
G DA VSET
109 0-255 D/A VOLTAGE SET (G)
11 B VCOM 127 0-255 V COM ADJ (B)
12 B ODD VR 245 0-255 ODD ADJ (B)
13
B EVEN VR
97 0-255 EVEN ADJ (B)
14
B DLY CNT
127 0-255 DLY CONT (B)
15
B DA VSET
11 0-255 D/A VOLTAGE SET (B)
16
R VREF SEL
0 0, 1 VOLTAGE REF SELECT (R)
17
G VREF SEL
0 0, 1 VOLTAGE REF SELECT (G)
18
B VREF SEL
0 0, 1 VOLTAGE REF SELECT (B)
Category Item Adjustment Standard Data Note Device
number item data range
LCD-DR
GPLL-C-JPN
0 VCOL 248 0-255 COUNTER L
1 VCOH 5 0-15 COUNTER H
2 DIV 2 0-3 DIVIDER
3 CODL 0 0-3 DELAY
4 FIDL 15 0-31 FINE DELAY
5 PPOL 1 0, 1
PHASE COMP. INPUT POLARITY SET
6 CPMP 2 0-3 CHARGE PUMP
7 UNLO 1 0, 1 UNLOCK OUT ON/OFF
8 DSYN 1 0, 1 DELAY SYNC ON/OFF
9 CL2 1 0, 1 1/2 TTL CLOCK ON/OFF
10 DSYP 0 0, 1
DELAY SYNC OUTPUT POLARITY
11 SYP 0 0, 1 INPUT SYNC POLARITY
Category Item Adjustment Standard Data Note Device
number item data range
GPLL-C-JPN
Category Item Adjustment Standard Data Note Device
number item data range
PLL-C-N/P

–23 –
KF-50SX200/50SX200K/50SX200U
KRM-905
IP00C741A
0
CALCULATION
0 0, 1
1
OACTHST-L
92 (95) 0-255
OUTPUT PORT ACT HORIZONTAL
START POINT
2
OACTHST-H
0 0-15
OUTPUT PORT ACT HORIZONTAL
START POINT
3 SYRDLY 22 (11) 0-255 FORCED SYNC RESET DELAY
4 HZOOM-L 30 0-255 HORIZONTAL ENLARGEMENT
CONTROL
5 HZOOM-H 14 0-15 HORIZONTAL ENLARGEMENT
CONTROL
6 VZOOM-L 0 (10) 0-15 VERTICAL ENLARGEMENT
CONTROL
7 VZOOM-H 192 (160) 0-255 VERTICAL ENLARGEMENT
CONTROL
8 OHCYCL-L 127 (16) 0-255 OUTPUT PORT HORIZONTAL
SYNC SIGNAL CYCLE
9 OHCYCL-H 3 0-15 OUTPUT PORT HORIZONTAL
SYNC SIGNAL CYCLE
10 OVCYCL-L 232 0-255 OUTPUT PORT VERTICAL
SYNC SIGNAL CYCLE
11 OVCYCL-H 3 0-15 OUTPUT PORT VERTICAL
SYNC SIGNAL CYCLE
12 OACTHW-L 168 0-255
OUTPUT PORT ACT HORIZONTAL
WIDTH
13 OACTHW-H 2 0-15
OUTPUT PORT ACT HORIZONTAL
WIDTH
14 OACTVST-L 0 0-255 OUTPUT PORT ACT VERTICAL
DIRECTION START POINT
15 OACTVST-H 0 0-15 OUTPUT PORT ACT VERTICAL
DIRECTION START POINT
16 OACTVW-L 0 0-255 OUTPUT PORT ACT VERTICAL
WIDTH
17 OACTVW-H 3 0-15 OUTPUT PORT ACT VERTICAL
WIDTH
18 IACTHST-L 111 (116) 0-255 INPUT PORTACT HORIZONTAL
START POINT
19 IACTHST-H 0 0-15 INPUT PORT ACT HORIZONTAL
START POINT
20 IACTHW-L 88 0-255 INPUT PORT ACT HORIZONTAL
WIDTH
21 IACTHW-H 2 0-15 INPUT PORTACT HORIZONTAL
WIDTH
22 IACTVST-L 23 (4) 4-255 INPUT PORTACT VERTICAL
START POINT
Category Item Adjustment Standard Data Note Device
number item data range
IP00C741A Category Item Adjustment Standard Data Note Device
number item data range
23 IACTVST-H 0 0-15 INPUT PORT ACT VERTICAL
START POINT
24 IACTVW-L 64 (226) 0-255 INPUT PORTACT VERTICAL
WIDTH
25 IACTVW-H 2 (1) 0-15 INPUT PORT ACT VERTICAL
WIDTH
Category Item Adjustment Standard Data Note Device
number item data range
IP00C741E
IP00C741E
0 OHSCT 8 0-31 OUTPUT PORT HORIZONTAL
SYNC SIGNAL
CONTROL
1 OVPH 0 0-7 OUTPUT PORT VERTICAL
SYNC SIGNAL
CONTROL
2 OVSCT 7 0-15 OUTPUT PORT VERTICAL
SYNC SIGNAL
CONTROL
3 IIMGCT 0 0, 1 INPUT IMAGE CONTROL SIGNA
4 IBIE 0 0, 1 BUSY/INT ENABLE BIT
5 BI 0 0, 1 BUSY/INT SPECIFICATION BIT
6 ICMD 1 0, 1 IMAGE INPUT COMMAND
7 OCMD 1 0, 1 IMAGE OUTPUT COMMAND
8 SYREN 1 0, 1 FORCED SYNCHRONIZATION
ENABLE
9 SYRMOD 1 0, 1 FORCED SYNCHRONIZATION
TIMING
CONTROL
10 ACTPOL 0 0, 1 POACT OUTPUT POLARITY
SELECT
11 ACTS 0 0-3 POACT SELECT
12 OGEN 1 0, 1 IMAGE OUTPUT PORT SYNC
SIGNAL GENERATION ENABLE
13 OHPOL 0 0, 1
POLARITY OF THE POHS SIGNAL
14 OVPOL 0 0, 1 OUTPUT PORT VERTICAL
SYNC SIGNAL
CONTROL
15 OACT-MOD 1 0, 1
OUTPUT PORT ACT MODE SELECT
16 OACT-DL 0 0-3
OUTPUT PORT ACT START TIMING
17 OACT-HMK 0 0, 1 OUTPUT PORT ACT START
POHS MARK
18 OMOD 0 0, 1 IMAGE OUTPUT MODE
19 OBKSL 0 0, 1 IMAGE OUTPUT SELECT
20 OFILLEN 0 0, 1 OUTPUT FILL
21 OPXDLY 0 0, 1 OUTPUT 1 PIXEL DELAY
22 IAPOL 0 0, 1 PIACT SIGNAL POLARITY
SELECT
23 IVPOL 1 0, 1 V SYNC SIGNAL POLARITY
SELECT
No mark : PAL or commom, ( ) : NTSC

–24 –
KF-50SX200/50SX200K/50SX200U
KRM-905
IP00C741L
0 HZAS 0 0, 1 H ZOOM AS
1 HZLE 0 0, 1 HORIZONTAL ENLARGEMENT
INTERPOLATION COEFFICIENT
LOOKUP TABLE ENABLE
2 HZMD 1 0, 1 HORIZONTAL ENLARGEMENT
MODE
3 HZIP 1 0, 1 HORIZONTAL ENLARGEMENT
INTERPOLATION ENABLE
4 VZAS 0 0, 1 V ZOOM AS
5 VZLE 0 0, 1 VERTICAL ENLARGEMENT
INTERPOLATION COEFFICIENT
LOOKUP TABLE ENABLE
6 VZMD 1 0, 1 VERTICAL ENLARGEMENT
MODE
7 VZIP 1 0, 1 VERTICAL ENLARGEMENT
INTERPOLATION ENABLE
8 COLUTH0 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
9 COLUTH1 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
10 COLUTH2 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
11 COLUTH3 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
12 COLUTH4 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
13 COLUTH5 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
14 COLUTH6 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
15 COLUTH7 0 0-63 HORIZONTAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
16 COLUTV0 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
17 COLUTV1 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
Category Item Adjustment Standard Data Note Device
number item data range
24 IHPOL 0 0, 1 H SYNC SIGNAL POLARITY
SELECT
25 IVSSEL 0 0-3 V SYNC SIGNAL SELECT
26 IHSSEL 0 0, 1 H SYNC SIGNAL SELECT
27 IMOD 0 0, 1 IMAGE INPUT MODE
28 VAL 0 0-3 PIXEL VALUE MEASUREMENT
MODE
29 UPSEL 0 0, 1 PIXEL SELECTION DURING
INTERLEAVED INPUT
30 MONSTV-L 5 0-255 IMAGE MONITOR VERTICAL
START POINT
31 MONSTV-H 0 0-7 IMAGE MONITOR VERTICAL
START POINT
32 MONEDV-L 5 0-255 IMAGE MONITOR VERTICAL
END POINT
33 MONEDV-H 1 0-7 IMAGE MONITOR VERTICAL
END POINT
34 MONSTH-L 0 0-255 I
MAGE MONITOR HORIZONTAL
START POINT
35 MONSTH-H 0 0-7
IMAGE MONITOR HORIZONTAL
START POINT
36 MONVW 0 0-255 IMAGE MONITOR VERTICAL
WIDTH
37 MONHW 0 0-255
IMAGE MONITOR HORIZONTAL
WIDTH
38 ECLP 0 0, 1
ERROR PROPAGATIOON OVERFLOW
PROTECTION ENABLE
39 EDMOD0 0 0, 1 ERROR DIFFUSION MODE
40 EDEN 0 0, 1 ERROR DIFFUSION ENABLE
41 GOHSW-L 0 0-255 VERTICAL SYNC SIGNAL
JUDGE COUNTER VALIE
42 GOHSW-H 0 0-15 VERTICAL SYNC SIGNAL
JUDGE COUNTER VALIE
43 RTG1 2 0-3
REGISTER TRANSFER CONTROL
44 RTG0 2 0-3 R
EGISTER TRANSFER CONTROL
45 POSNEG 0 0, 1 IMAGE OUTPUT SYNC CLOCK
SELECT
46 OBTSWP 0 0, 1 INPUT/OUTPUT SIGNAL
SELECTION
47 OBYSWP 0 0, 1 INPUT/OUTPUT SIGNAL
SELECTION
48 IBTSWP 0 0, 1
INPUT/OUTPUT SIGNAL SELECTION
49 IBYSWP 0 0, 1
INPUT/OUTPUT SIGNAL SELECTION
50 ISMPMD 0 0-3
INPUT/OUTPUT SIGNAL SELECTION
Category Item Adjustment Standard Data Note Device
number item data range
IP00C741L

–25 –
KF-50SX200/50SX200K/50SX200U
KRM-905
IP00C741R
0 IFV L 0 0-255 NUMBER OF H SYNC SIGNALS
ON INPUT PORT DURING V
SYNC PERIOD
1 IFV H 0 0-3 NUMBER OF H SYNC SIGNALS
ON INPUT PORT DURING V
SYNC PERIOD
2 IPXCNT L 0 0-255 NUMBER OF IMAGE OUTPUT
CLOCKS FOR ARBITRARY
INPUT IMAGE LINES
3 IPXCNT M 0 0-255 NUMBER OF IMAGE OUTPUT
CLOCKS FOR ARBITRARY
INPUT IMAGE LINES
4 IPXCNT H 0 0-31 NUMBER OF IMAGE OUTPUT
CLOCKS FOR ARBITRARY
INPUT IMAGE LINES
5 IPX00 0 0-255 INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE
MONITOR
6 IPX01 0 0-255 INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE
MONITOR
Category Item Adjustment Standard Data Note Device
number item data range
18 COLUTV2 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
19 COLUTV3 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
20 COLUTV4 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
21 COLUTV5 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
22 COLUTV6 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
23 COLUTV7 0 0-63 VERTICAL INTERPOLATION
COEFFICIENT LOOKUP TABLE
REGISTER
Category Item Adjustment Standard Data Note Device
number item data range
IP00C741R
Category Item Adjustment Standard Data Note Device
number item data range
7 IPX02 0 0-255 INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE
MONITOR
8 IPX03 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
9 IPX10 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
10 IPX11 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
11 IPX12 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
12 IPX13 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
13 IPX20 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
14 IPX21 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
15 IPX22 0 0-255 I
NPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
16 IPX23 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
17 IPX30 0 0-255 I
NPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
18 IPX31 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
19 IPX32 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR
20 IPX33 0 0-255
INPUT SCREEN SPECIFIED
POSITION PIXEL VALUE MONITOR

–26 –
KF-50SX200/50SX200K/50SX200U
KRM-905
IOSD E 0 VPOS 8 0-31
ENGINE SERVICE INDICATION V POSTION
1 HPOS 15 0-63
ENGINE SERVICE INDICATION H POSTION
2 OUT SYNC 0 0, 1 NOT USED ON SERVICE
3 OUT TIMI 1 0, 1 NOT USED ON SERVICE
4 OUT PHAS 0 0, 1 NOT USED ON SERVICE
5 OUT SEL 1 0, 1 NOT USED ON SERVICE
Category Item Adjustment Standard Data Note Device
number item data range
OSD E
OPTION E
0
LAMP TIME
0 0, 1 LAMP LIGHTING TIME
1 LAMP OFF 0 0, 1 TIME FROM POWER OFF TO
LAMP OFF (0: 0sec., 1: 5sec.)
2 FAN OFF 1 0, 1 TIME TO FAN STOP
(0: 2min., 1: 2min.)
3 FAN1 RPM1 2 0-3
ROTATING SPEED OF FAN FOR
OPTICS ON NORMAL CONDITION
4 FAN1 RPM2 2 0-3 ROTATING SPEED OF FAN FOR
OPTICS AFTER POWER OFF
5 FAN2 RPM1 1 0-3 ROTATING SPEED OF FAN FOR
LAMP ON NORMAL CONDITION
6 FAN2 RPM2 1 0-3 ROTATING SPEED OF FAN FOR
LAMP AFTER POWER OFF
7 FLAG1 8 0-15 NOT USED ON SERVICE
8 AGING PT 1 0, 1 NOT USED ON SERVICE
9
TEMP SHIFT
1 0, 1 TEMPERATURE CORRECTION
ON/OFF (0: OFF, 1: ON)
Category Item Adjustment Standard Data Note Device
number item data range
OPTION E
LM75 0 SET 41DEG
0-99DG
TEMPERATURE SWITCHING TO
MAXIMUM VELOCITY OF WIND
1 TIME 10MIN
0-99MIN TIME TO KEEP MAXIMUM
VELOCITY OF WIND AND TO DETECT
Category Item Adjustment Standard Data Note Device
number item data range
LM75