Sony KDL-46551 00 User manual

LCD Digital
Color
TV
Sony will work to resolve
your questions more quickly than your retailer.
Canada
1.877.899.S0NY
United States
1.800.222.S0NY
Sony Customer Support
U.S.A.: www.sony.com/tvsupport
Canada: www.sony.ca/support
Please Do Not Return
the Product to the Store
©2009 Sony Corporation
KDL-5255100
KDL -46551 00
KDL-4055100
KDL -32551 00

Owner's Record
The model and serial numbers are located at the rear of the TV.
Record these numbers
in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding this
TV.
Model Name
Serial
No.
CAUTION
To prevent electric shock and blade exposure, do not use
this polarized AC plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted.
oOperate the TV only on 120 VAC.
oAvoid operating the TV at temperatures below 41°F
(5 0C).
Declaration of Conformity
Trade Name: SONY
Model: KDL-32S5100/KDL-40S5100/
KDL-46S5100/KDL-52S5I00
Responsible Party: Sony Electronics Tnc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (l)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
For customers in Canada
This Class Bdigital apparatus complies with Canadian
ICES-003.
2
FCC Related Information
This equipment has been tested and found to comply with
the limits for aClass Bdigital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
oReorient or relocate the receiving antenna.
oIncrease the separation between the equipment and
receiver.
oConnect the equipment into an outlet on acircuit
different from that to which the receiver is connected.
oConsult the dealer or an experienced radio/TV
technician for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with
the limits for adigital device pursuant to Subpart B of Part
15 of FCC Rules.
Note
This television includes aQAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to acable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
For Customers in the United States
The lamp in this product contains mercury.
Disposal
of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).

•
14~ijijt4i6i;1
Compatible Wall Mount Bracket Information
Use the following Sony WALL-MOUNT BRACKET with
your TV model.
KDL- KDL- KDL- KDL-
3255100 4055100 4655100 5255100
5U-WL500
Use with other WALL-MOUNT BRACKETS may cause
instability and could result in property damages or injury.
To Customers
Sufficient expertise is required for TV installations. Be
sure to subcontract the installation to aSony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
Licensing Information
Macintosh is atrademark of Apple Inc., registered in the
U.S. and other countries.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
Fergason Patent Properties, LLC:
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
TruSurround XT, SRS and (e) symbol are trademarks of
SRS Labs, Inc. TruSurround XTtechnology is incorporated
under license from SRS Labs, Inc.
BIu-ray Disc is atrademark.
"BRAVIA", BRAVIA, BRAVIA Sync and iii are
trademarks or registered trademarks of Sony Corporation.
"PLAYSTATION" is aregistered trademark and "PS3" is
atrademark of Sony Computer Entertainment Inc.
Your BRAVIA TV is ENERGY ST AR®
qualified in the "Home" mode.
It meets strict energy efficiency guidelines
set by the U.S. Environmental Protection
Agency and Department of Energy.
ENERGY STAR is ajoint program of these government
agencies, designed to promote energy efficient products
and practices.
oWhen the TV is initially set up, it is designed to meet
ENERGY STAR requirements.
oChanges to certain features, settings, and
functionalities of this TV (i.e. Picture/Sound, Light
Sensor, Power Savings) can slightly change the
power consumption.
Depending upon such changed settings, the power
consumption may increase which possibly could exceed the
limits required for the ENERGY STAR qualification.
[I] DOLB'l
DIGITAL I
HIGH-DEFINITION TELEVISION
3

Contents
Introducing Your New BRAVIA@
Welcome to the World of BRAVIABl 5
Experiencing Stunning HD with
Your BRAVIA 5
The Four Steps to aFull HD Experience 6
TV Feature Highlights 6
Getting Started
Setting Up Your TV 7
Locating Inputs and Outputs 8
Connecting Other Equipment 10
Bundling the Connecting Cables
11
Securing the TV 11
Inserting Batteries into the
Remote Control 12
Initial Setup 12
Operating the TV
Remote Control Button Description 13
TV Controls and Indicators 15
Customer Support
United States
http://www.sony.com/tvsupport
Canada
http://www.sony.calsupport
4
Using Features
Using BRAVIA Sync with Control for
HDMI 16
Favorites 17
Wide Mode 18
Wide Mode with
PC 19
Using the Menus
Navigating through TV Menus 20
Other Information
How to Care for Your BRAVIA 21
Things to consider 21
Troubleshooting 21
Specifications 22
Index 23
On-line Registration
United States
http://productregistration.sony.com
Canada
http://www.SonyStyle.calregistration

Introducing Your New BRAVIA® •
Thank you for purchasing this Sony BRAVIA® high-definition television. Use the
documentation listed below to get the most out of your
TV.
Welcome to the World of BRAVIA@
Safety Booklet
Provides precautionary measures
to keep you and your
TV safe. Read
this information prior to setting up
your
TV.
Operating Instructions
Provides general TV operation
information that will allow you to
view your
TV with minimal
customizations.
5'
:;-
o
~
(')
~.
~
~
Quick Setup Guide ~
Provides TV setup information, ~
illustrates sample optional equipment ~
connection diagrams. C"
..-::
~
~
Reference Book
Offers the most complete TV
operation information available for
your TV and presents advanced
customization details. Access it at
www.sony.com/referencebook.
t
~\ The TV operation information above has been designed in an eco-friendly
•
., manner to reduce the consumption of natural resources.
Experiencing Stunning HD with Your BRAVIA
The quality of the image you see on your BRAVIA TV is only as good as the quality of the
signal it receives.
To experience the stunning detail of your new BRAVIA TV, you need
access to
HD programming. Your BRAVIA TV can receive and display HD programming
from:
•Over-the-air broadcasting via HD-quality antenna
• HD cable subscription
•HD satellite subscription
•Blu-ray
Disc™ player or other HD compatible external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
This manual is for the 32 class, 40, 46 and 52 inch BRAVIA KDL-S5100 series models with screen size measured diagonally. The 32 class
has a31.5 inch viewable image size (measured diagonally).
5
Introducing Your New BRAVIA® •
Thank you for purchasing this Sony BRAVIA® high-definition television. Use the
documentation listed below to get the most out of your
TV.
Welcome to the World of BRAVIA@
Safety Booklet
Provides precautionary measures
to keep you and your
TV safe. Read
this information prior to setting up
your
TV.
Operating Instructions
Provides general TV operation
information that will allow you to
view your
TV with minimal
customizations.
5'
:;-
o
~
(')
~.
~
~
Quick Setup Guide ~
Provides TV setup information, ~
illustrates sample optional equipment ~
connection diagrams. C"
..-::
~
~
Reference Book
Offers the most complete TV
operation information available for
your TV and presents advanced
customization details. Access it at
www.sony.com/referencebook.
t
~\ The TV operation information above has been designed in an eco-friendly
•
., manner to reduce the consumption of natural resources.
Experiencing Stunning HD with Your BRAVIA
The quality of the image you see on your BRAVIA TV is only as good as the quality of the
signal it receives.
To experience the stunning detail of your new BRAVIA TV, you need
access to
HD programming. Your BRAVIA TV can receive and display HD programming
from:
•Over-the-air broadcasting via HD-quality antenna
• HD cable subscription
•HD satellite subscription
•Blu-ray
Disc™ player or other HD compatible external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
This manual is for the 32 class, 40, 46 and 52 inch BRAVIA KDL-S5100 series models with screen size measured diagonally. The 32 class
has a31.5 inch viewable image size (measured diagonally).
5

The Four Steps to a Full HD Experience
Set, Sound, Source, and Setup
Along with your BRAVIA TV set, acomplete HD system requires an HD sound system, a
source of HD programming and aproper connection setup. Refer to the Quick Setup
Guide, enclosed separately, for connecting other optional equipment.
16:9 (high-definition) source
Most HDTV signals use awide screen aspect
ratio of 16:9. The 16:9 fills your BRAVIA
screen, maintaining acrisp, clear, vivid
picture.
4:3 (standard-definition) source
Most standard-definition signals use aboxy
4:3 aspect ratio. When a4:3 image is
displayed
on an HDTV, you will see black
bars on the sides. The picture quality may not
be as sharp as with HD sources.
TV Feature Highlights
Your new BRAVIA High Definition LCD TV will dazzle you with stunning 1 D8Dp image
quality but won't confuse you with complicated operation. The following features have
been included to help you get started enjoying your new
TV.
)0>- BRAVIA Sync: Your BRAVIA TV communicates with other Sony equipment
supporting the
Control for HOMI function (page 16).
)0>- Favorites: Your favorite channels and inputs are at your fingertips for easy
access to programs and inputs (page 17).
)0>- Auto Wide Mode: Set your TV to auto adjust the screen based on the signal
resolution (page 18).
)0>- ECO Settings: This model includes anumber of features designed to make
your new BRAVIA HDTV easier on your pocketbook and the environment.
Light Sensor -Detects the amount of light in your room and automatically
adjusts the brightness of the screen resulting
in more comfortable viewing in
any light condition.
Backlight -This feature reduces power consumption by turning off the
backlight.
~,- Suggestions
,,:;.,~h~ck~Qte{d~tails •.. Qjt~e~rili~e,:R¢f~r¢~c~'Bgo~·at W~w:sQllY.CQtrilref¥Nn~ebQok.
."'"""'~ ,,,,,,<,~ !' ;~ .. ,:. ;' ~,,: "'··".v""),oi,~.,,,; "',':',Iw'd, """,' .'<,' ~". ~ " _ ~:'\
6

Getting Started
Setting Up Your TV
Some TV models are packaged with adetached Table-Top Stand so you can mount it to awall •
right away.
If you are not mounting the TV to awall, you will need to attach the Table-Top Stand.
You will need aPhillips screwdriver and the supplied screws to complete the task. Look for the ~
instructions attached to the TV unit or read the instruction in the online Reference Book. ~
cS
(I)
Be sure to consider the following while setting up your TV: S
~
•Carry the TV with an adequate number of people; larger size TVsrequire two or more people. Q.
•Correct hand placement while carrying the TV is very important for safety and to avoid
damages.
•Ensure your TV has adequate ventilation
if it is installed against awall or in an enclosed area.
•For best picture quality, do not expose the screen to direct illumination or sunlight.
•Avoid installing the TV in aroom with reflective wall and floor materials.
•Avoid moving the TV from acold area to awarm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering the TV on.
7

Locating Inputs and Outputs
Rear Panel
Item Description
Side Panel
[I] SERVICE
[2J VIDEO IN 1/
COMPONENT
IN 1(1080p/
1080in20p/
480p/480i)/
L-AUDIO-R
rnr COMPONENT
IN2
@] AUDIO OUT
(FIX)
[§J HDMI IN 1/2/3
8
This port is to be used when service is required.
This input port can be used as composite video input (VIDEO
1) or as component
video input (COMPONENT
1). For composite use, connect the yellow jack to YN
for video and use audio Land Rfor audio signal. For component connection, use Y,
PB, PR for video signals and also connect the audio Land Rfor audio signal.
If you are using composite video input (VIDEO I), make sure to select Video 1
under Channel Menu. If you are using component video input (COMPONENT 1),
make sure to select Component 1under Channel Menu.
--,,-,- ,-,-,-,--- -
Component video provides better picture quality than the SVideo and composite
video. The COMPONENT IN 2and COMPONENT IN 1both accommodate for
video formats
of 1080p, 1080i, 720p, 480p, and 480i as labeled.
Audio connection
is required for the COMPONENT IN ports, connect audio (UR).
Connects to the left and right audio input jacks of your audio equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as aset-top box, DVD player, and
NV receiver. HDMI supports
enhanced, or high-definition video, plus digital audio.
Be sure to use only an HDMI cable that bears the HDMI logo.
If the equipment has aDVI jack and not an HDMIjack, connect the DVI jack to any
HDMI IN (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to
the AUDIO IN
(UR) jacks below the HDMI IN 1.

Item Description
[§] DIGITAL AUDIO Connects to the optical audio input of adigital audio equipment that is PCM optical
OUT (OPTICAL) compatible.
rn--CABLEJ---RF inp~t that connects t~yo~; Cable or over-the-air antenna. . .. - .. ---- .. -.--.--- .. --- ..
ANTENNA •
Connects to apersonal computer's video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use
an adapter (not
supplied).
If an adapter is used, connect the adapter to the computer before
connecting the
H01S-H01S cable.
You may need to adjust the TV settings or your PC's resolution and timing, see page
19 to setup your PC to this TV.
Connects to the composite video and audio outputjacks on your AN equipment
such as aDVO player orother video equipment. VIDEO IN 2input is located on the
left side panel
of the TV.
Connects to the SVIOEO outputjack of your OVD or other video equipment that
has SVIDEO which provides better picture quality than composite video. The S
VIDEO does not provide sound; you will need to connect the audio cables.
. _-------_.
PC IN
(RGB/AUDIO)
[IDVIDEO IN 2
SVIDEO
VIDEO/
L(MONO)-
AUDIO-R
~,. Suggestions
9

Connecting Other Equipment
Blu-ray
Disc Player/ DVD
"PS3" player
Digital
satellite Digital Audio
receiver cable box system Personal
computer Side panel
Rear of TV
Digital recorder
Analog audio Analog Digital audio
equipment audio equipment
(AN
Receiver/ equipment
Home Theater) (DVI only)
CABLE/ANTENNA
AUDIO
II -0
~[ID]
VCR/
Game system/
Camcorder
p
•Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
10

Bundling the Connecting Cables
You can bundle the connecting cables with the supplied cable band as illustrated below.
Do not bundle the
AC power cord with other connecting cables.
Securing the TV
LL
Sony strongly recommends taking measures to prevent the TV from toppling over.
IUnsecured TVsmay topple and result in property damage, serious bodily injury or even
•death.
Detailed information available on online Reference Book
r---- Secure the Stand for the TV -----, ..---- Anchor the TV to the Wall
•
Angle
braces
e+--- Stand
r---- Secure the TV to the Stand
Anchor bolt
Contact Sony Customer Support to purchase the optional
Support Belt Kit by providing your TV model name.
•For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories
•For Canada call: 1-877-899-7669
Wall-
mount
holes
Anchor bolts
-
11

Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching 0and 0on the batteries to the
diagram inside the battery compartment
of
the remote control.
Initial Setup
..
Push to
open
The Initial Setup screen appears when you turn on the
TV for the first time.
During this initial setup, you can
perform the following:
1Select the language for the on-screen display text.
2Select HOME or Retail mode.
3 Connect cable or antenna, then select OK to run Auto
Program.
{b
• If you have cable and antenna available, please connect
cable first.
•IMPORTANT: Auto Program process is only effective when cable or antenna is connected.
If you cancel Auto Program before completion some channels may not be available.
4Auto Program will scan for available channels from the signal source directly connected to
the
TV's CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
~, Suggestions
•When prompted to select HOME or Retail, be sure to select
HOME for ENERGY STAR compliant mode.
•
If you use both cable without abox and antenna connections, use an
A-B RF switch (not supplied). For more details, see the online
Reference Book.
•Select your preferred aspect ratio for the screen display. Press
WIDE to select the wide mode or press MENU and set the Auto
Wide to On under the Screen menu.
•To change the clock, press MENU and go to Setup menu then
select ClocklTimers and adjust Current Time.
12

Operating the TV
Remote Control Button Description
[2J CC Press to tum on and off the Closed Captions (CC).
To change or customize the CC display, see the online
Reference Book for more details.
•
Press once to display the stored Favorites menu. Press again
to exit from the Favorites menu. See page 17 for details.
These buttons are used to control the connected
equipment with Control for HDMI function (not
available on all Control for HDMI equipment). Some
other buttons on the remote control may also operate
BRAVIA Sync equipment.
~ (fast reverse): Press to playa program in fast
rewind mode.
~ PLAY: Press to playa program at anormal speed.
II PAUSE: Press to pause playback.
~ (fast forward): Press to playa program in fast
forward mode.
SYNC MENU: Displays the menu of the current
selected BRAVIA Sync device.
•STOP: Press to stop playback.
THEATER: Press to tum on and off the Theater
Mode. The picture settings will be set for a cinema-
like experience and the audio will be switched to the
audio
output of the attached speakers of your BRAVIA
Sync audio system. Your
BRA VIA Sync audio system
must be
connected by an HDMI connection to your TV
(see page 16 for details).
Press repeatedly to cycle through the available Wide
Mode settings.
See page 18.
Press to display the
menu with TV functions and
settings. See "Using the Menus" on page 20.
Press to
go back to the previous screen or exit from the
screen
when displaying menu items and settings.
[] DISPLAY"" Press to display information about channel/pro~ra~ ~r input
you are watching. The information banner will disappear in a
few seconds or press again to exit You can enable or disable
the
Info Banner by pressing MENU and go to the Setup
Menu to set Info Banner to On or Off.
p
The TV wi II show the remaining time of the current program
you are watching when the program time is less than 24 hours.
~ BRAVIA
Sync
@] FAVORITES
[ID WIDE
[ill RETURN
rn MENU
r, .. Fl ;. .l' C' pnl;VFP
~
p
• The 5, PLAY and CH +
buttons have atactile
dot. Use them as a
reference
when
operating the TV. 13

Guidelines to follow
rnJo
!HI +1+1+1+
(0
~ TOOLS
~ CH +/-
ff1l JUMP
Press 0-9 to select achannel; the channel changes after
afew seconds, or press ENT to change channels
immediately.
Use with 0-9 and
ENT to select digital channels.
For example, to enter 2.1, press ®'
0, CD and ENT.
Press to adjust the volume.
Press to mute the sound. Press again or press VOL +to
restore the sound.
Press to tum on and off the
TV.
Press to display the list of External Inputs and TV
mode.
To toggle through the inputs, press +/+.
Press +1+1+1+ to move the on-screen cursor. Press (0
to select/confirm an item.
Press to display alist
of convenient functions and menu
shortcuts. The TOOLS menu items vary based on
current input and content.
Press to scan through channels.
To scan quickly
through channels, press and hold down either +/-.
Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
... -- ......
14
•Point your remote control directly at the IR sensor located on
your TV.
•Make sure that no objects are blocking the path between the
remote control and the IR sensor on your
TV.
•Fluorescent lamps can interfere with your remote control; try
turning off the fluorescent lamps.
•
If you are having problems with the remote control, reinsert or
replace your batteries and make sure that they are correctly
inserted.

TV Controls and Indicators
•
STANDBY POWER
~-~
PIC OFF ITIMER
~
Receives IR signals from the remote control.
(IR) Infrared
Receiver
Light Sensor Senses room light level and adjusts the screen brightness accordingly. Do not put
anything near the sensor or the nearby general area (as shown above),
as its function
may be affected.
[2J-piC,OFFT,-,-,---,-lig-ht~-~pin-amber-when-'th-e-Tfmer-ors-ieepf~nctio~s ~e set. when theti~er is set,
TIMER LED this LED will remain lit even ifthe TV is turned off. For details, see the online
Reference Book.
Lights up in green when the Backlight feature
is activated to off (see the online
Reference Book for more details).
[ID'-STA-ND'BY'-[ED-'Lights-~pT;~-redwhenthe'fu-nctfon-PC'-Power'Management is activated imd there
is no signal received while in the PC Input (see online Reference Book for more
details).
If the LED blinks in red continuously, this may indicate the TV needs
servicing (see contacting Sony information
on the front cover).
@]'FiOWe-R TED-----'Light~·~p'fn-g~eenwhen-ihe-TV is turned on:
[IDP-oWER·-----·---·--p;:-~~~--toU;mOnan(roffthe· 1'\1.-------. -.--------------- .... '-' ... -- .-- -- --- .. -
[ID +CHANNEL - '--'Press to scan through chan~el~. To scan-quickly' thro~gh-ch~m~eTs·,--press il;{dho'ld---'-
down either +/-. In the MENU screen, these buttons serve
as up/down buttons.
[1J'+-v6IirME-:"-'Pre;~to-adju~t-the-~olu~e:in-theMENa'screen, these buttons serve as left/right
buttons.
rn:r~-~:----'-'--'------Pres-s'todisplaythe'listorinputs~-Totog-gle through'the inp~ts~' press the buttons --
I
INPUT CHANNEL +/-.
In the MENU screen, this button serves to confirm the selection or setting.
rnr--MENU------·--Press to display-MENU with1'V-iunctionsa~d s-ettings(s-ee-'~UsinitheMenus"on page 20).
-_._._----_ .. _-_._----_._-_ .. _-_._ .. _---------~--_.~_.-~ .. _._._ .. _ .. _-_._._ .. _------ ---_ .. _- ,_.. - .... -_ ..... _. _._-_.< .. _.-._., -
{b
•The CHANNEL +button has atactile dot. Use it as areference when operating the TV.
15

Using Features
Using BRAVIA Sync with Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment
supporting the Control for HOMI function.
To connect Sony equipment with Control for HOMI
Use an HDMI cable that bears the HDMI logo for connection. See the HDMI connection shown in
the Quick Setup Guide provided with the TV documentation.
Setting the Control for HOMI
The Control for HOMI function must be set up in order for the TV to communicate with other
Control for HOMI enabled equipment. Refer to the online Reference Book for information on
how to set up this
TV's Control for HOMI function. For other equipment, refer to its operating
instructions.
Available options using Control for HOMI
The following operations are available after you connect the supported Sony equipment with
Control for HOMI function to your TV:
•Automatically turn off the connected equipment when you turn off the TV.
•The TV will automatically turn on and select the respective HDMI input.
•The connected equipment is turned on
by One-Touch-Play.
•Possible operations with BRAVIA Sync buttons, see page
13.
•Equipment listed under External Inputs will turn on automatically when selected.
When aSony
NV receiver with BRAVIA Sync is connected, the following additional operations
are possible:
•Turning on the
NV receiver when the TV is turned on.
•Adjusting the volume and muting
of the NV receiver with the TV's remote control.
•Pressing
TC==t on the remote control turns on and searches for an external audio system that
supports BRAVIA Sync. When the BRAVIA Sync audio system is on, the internal speakers
of the
TV will turn off and the Picture Mode will change automatically to Cinema.
•When using BRAVIA Sync, the included remote control will change some of the buttons
functions to accommodate control over the device.
If the device does not support this feature,
some buttons will remain without function.
16

Favorites
With Favorites, you can manage your preferred TV channels and External Inputs.
, Addinjtto;If~v,orites
., "'k" .
1Press TOOLS to add the current channel or input while you are watching it.
2Highlight Add to Favorites and press G.
': :l'.i~pl;jYlqg;'FaJtQrite's" c ~'
"" ': ,.,. .:. \-~i ,'>~.i ~ - ~ l ~ ""'" .
Press FAVORITES on the remote control.
Video 1I Channel PC Recently viewed items Saved channel or external input
•
When the recently viewed items are highlighted, press +1+ to move between them.
To tune to an item, highlight its icon and press G.
~NaV'.igatiJ1grFavO(ite$' ,
~ :I ~ -1' "-r: .' .. ,' .. - .,;.~" -y t... ~
1Press +1+ to move between saved selections in acarousel-like fashion.
2
3
Press TOOLS to remove the current channel or input while you are watching it.
Highlight Remove from Favorites and press G.
~, Suggestions
-
To clear your recently viewed items list, highlight the list in Favorites and press TOOLS, then
select Clear Recently Viewed. Recently viewed items are also cleared when the
TV is
powered off.
-Auto Program will clear your TV channels from Favorites (see page 12).
17

Wide Mode
The Wide Mode feature allows you to select the screen display of your preference. Based on the
original source, ablack frame or black bars may surround the picture.
You can manually change the Wide Mode setting while watching TV by pressing the WIDE
button on your remote control.
How to set to Auto Wide
Press MENU then go to the Screen menu.
Select Auto Wide and set to On.
Changing the Wide Screen Mode
Press WIDE repeatedly to cycle through the available modes.
Standard-definition source iHigh-definition source
0Cl1J !1iJI s=E
~--·l··-·········'·····-···'·········· -......... .· - --·- .. ·.·-----.---·-l .. - · ··.· .--,
~wrae ... Zoom ... ·- ...... ····-·-- ···--- TWid'e .. ·Zoom·-·--·_ .. · --· · -·-'
~
"iNi"""""""'k' I ~.}., "j'" LlJ' 'i"
,'O-,} '-1'1:'~ ~{:'v~~: ,J~
, ,> <-~ ..:1
.. j
!Normal
IThis mode is not available.
,
.... ·· _- ;·Fulr------- _ .. - -- _- .
i K1I B::8
I
...
l
... Zoom-· ... ·_·_- ..... - ...... ·-·... ........ T·Zoom· ... -· ..... ·-·--· ..... ·-------· .. · ... ·-·1
~ l~~i
,Full Pixei--·-·...... . -·-·-·-·- ... ~-FuffPix-el--:....-· .. ·····~: .. -·-----'
,This mode is not
available.
p
•Normal is available with 480i or 480p sources only as they are standard-definition and not from
high-definition source such as component video input, HDMI input and digital
TV.
•Full Pixel is available only for 720p, l080i and 1080p formats excluding Cable/Antenna input.
•Full Pixel displays the picture in its native resolution.
18

Wide Mode with PC
Changing the Wide Screen Mode for
PC Timing
Press WIDE repeatedly to cycle
through the available modes while in
the PC input mode.
p
Full Pixel displays the picture in its
native resolution.
~()M 800 x600
•
Wide Zoom
~
"No'rm~il
D
"',·
'::'/ l
""'" ..
'--Full-' .
~
_ .. ,
J'f. ';4:~
r' ?>
-.zeic'm.--- - .. - ... --.- -- _ ..
~
;-r=-liffpTxer- -- - ..
I~~I
1,280 x 768
. NorlTlal'
~
~
"'Full' .' - .
~
·-··-Zoom-----·-·-- ---. -_ .. -- ..
~
j~
········-Fufl Pixer" .
,[M]
•
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
VGA ~o x
s\idA 800 x
xdA. 1,024 x
WxGA··-··· . .1,280' .······-·x·
.. -----· .. --1;3-60------·-·;;.·-.
.sxdA. -.-----.. ..· .... 1,280------- .. x· .
·l:IJ:):r5'~~-~=.- .' .. " J~~Q ==~=~_?<:.'~
(b
480 31.
.......... 600 37.9
·····768····· ········48.4
76847.8
----- -'7'68-' .. -. . .. 4'7.7
--·-i,024-- _.- ~.O
'1;08()- - --. --.- .. --. -- 61.5
- ... _ ... ~ - -'-"~" ,." - ".. "- ~.- .~--' ---.
60
.. '60
60
60
60
60
._ .. -60'
VGA
VESAGuldeilnes
"VE'SAGlildeiines
. . ···-VltSA··---·
\rES-A·-·-··
.. - .. -.- .. VESA .... -.-
..... -- '--CEA-=S6i' .---.
, .'
•This TV's PC input does not support Sync on Green or Composite Sync.
•This
TV's PC VGA input does not support interlaced signals.
~" Suggestions
.:t\~ju~t~,~~~ ~o:~u1P1Q~fe;h9tii?~~1~es Qfjhe-picttire '~~enthe ,lY rec~iY~~.,~~ input;~i¥.~~r: ..
> from theCQunecteQ: eG~ ,' > .. .-. , , • -, : -, .
:>. ;.. ~
19

Using the Menus
The MENU button allows you to access the variety of TV settings for you to customize the settings.
Navigating through TV Menus
+1+ button:
Allows you to highlight options where applicable.
Gbutton:
Allows you to select the highlighted option and advance to the next screen.
•button:
Allows you to move back to the previous screen.
•button:
Allows you to move to the next screen.
Ci
Lock
I+i··········_··;~~r~~~::~e:~~h~li:~~~~~o~:::;eee~h~a~r~flo;~~O~:r~~~h~:~::~~e~~~~~~i:~ ~:et~:r:~~n~~
Screen can be smaller, looking like asquare in arectangle shaped screen. The screen settings allow you
to adjust the size and shape of image you see on your TV. Use the Wide Mode option or use
Auto Wide,
or 4:3 Default to keep the square like screen size. Also there are other options to
adjust the PC settings.
-a ;~::~~~~~~~~~~~~~~t::l~~Sa~~etl~,S::-~~ub~:::~~:~rC~~~: :~~n~:~sn~a :;~::' ~~:: ....
Channel you use the CH+/- button or even label channels or inputs.
Parental Lock Menu allows you
to block programs according to their content and ratlng'labels
and block channels (regardless
of the programs). Set the password and limit the access based on
the rating levels or block the channel. Not every program
is suited for the general audiences.
Setup
Menu allows you to set and customize Closed Captions withdifferent size and color .-
of the fonts, program the TV to tum off, select the Language for your on-screen display, or
Setup change the settings related to power consumption.
-- .-
~ -Suggestions
•Many of the options available on your TV come with help texts on screen.
If you needfurther
"explfUlations on how to adjust these settings, see the online Reference Book.
•Sleep can
be set from 15, 30, 60 or 120 minutes. Press MENU then go to Setup menu, select
Clock/Timers, then Sleep and select your desired minutes.
•Use TOOLS button
on the remote control to quickly acceSs convenient functions.
20