Sony SU-W110 User manual

Wall-Mount Bracket SU-W110
© 2005 Sony Corporation
SU-W110
4-095-513-12 (1)
Operating Instructions
Bedienungsanleitung
Gebruiksaanwijzing
Manual de instruções
Bruksanvisning
Mode d’emploi
Istruzioni per l’uso
Manual de instrucciones
Käyttöohje
Bruksanvisning
Betjeningsvejledning
Οδηγίες Χρήσης
Инcтpyкция по эксплуатации
Instrukcja obsługi
GB
DE
NL
PT
NO
FR
IT
ES
FI
SE
DK
GR
RU
PL
Wall-Mount Bracket

2(GB)
Thank you for purchasing this product.
To Customers
Sufficient expertise is required for
installing this product. Be sure to
subcontract the installation to Sony
dealers or licensed contractors and
pay special attention to safety
during the installation. Sony is not
liable for any damages or injury
caused by mishandling or improper
installation. Your Statutory Rights (if
any) are not affected.
This Wall-Mount Bracket is only for
Sony LCD Color TVs. Do not use the
bracket with a TV whose operating
instructions do not specify the use of
this bracket.
WARNING
If the safety precautions are not observed
or the product is used incorrectly, it may
result in serious injury or fire.
This instruction manual shows the
correct handling of the product and
important precautions necessary to
prevent accidents. Be sure to read this
manual thoroughly and use the product
correctly. Keep this manual available for
future reference.
To Sony Dealers
Sufficient expertise is required for
installing this product. Be sure to read
this instruction manual thoroughly to do
the installation work safely. Sony is not
liable for any damages or injury caused
by mishandling or improper installation.
Please give this manual to the customer
after installation.
On Safety
Products by Sony are designed with
safety in mind.
If the products are used incorrectly,
however, it may result in a serious injury
through fire, electric shock, the product
toppling over, or the product dropping.
Be sure to observe the precautions for
safety to prevent such accidents.

3(GB)
English
GB
To Customers
WARNING
If the following precautions are
not observed, serious injury or
death through fire, electric shock,
the product toppling over, or the
product dropping can result.
Be sure to subcontract the
installation to licensed
contractors and keep small
children away during the
installation.
If the Wall-Mount Bracket or the TV is
not installed correctly, the following
accidents may occur. Be sure licensed
contractors carry out installation.
•The TV may fall and cause a serious
injury such as a bruise or a fracture.
•If the wall on which the Wall-Mount
Bracket is installed is unstable, uneven,
or not perpendicular to the floor, the
TV may fall and cause injury or
property damage. The wall should be
capable of supporting a weight of at
least four times the TV weight.
•If the installation of the Wall-Mount
Bracket on the wall
is not sufficiently
sturdy, the TV may
fall and cause
injury or property
damage.
Be sure to subcontract moving
or dismounting of the TV to
licensed contractors.
If persons other than licensed contractors
transport or dismount the TV, it may fall
and cause injury or property damage. Be
sure that two or more persons carry or
dismount the TV.
Do not spill liquid of any kind
on the TV.
If you allow the TV to get wet, this may
result in a fire or an electric shock.
Do not remove screws, etc.,
after mounting the TV.
If you do so, the TV may fall and cause
injury or property damage.
Do not disassemble or make
alterations to the parts of the
Wall-Mount Bracket.
If you do so, the Wall-
Mount Bracket may fall
and cause injury or
property damage.

4(GB)
Do not mount any equipment
other than the specified
product.
This Wall-Mount Bracket is designed for
use with the specified product only. If
you mount equipment other than
specified, it may fall or break, and cause
injury or property damage.
Do not cover the ventilation
hole of the TV.
If you cover the
ventilation hole (with a
cloth, etc.), heat may
build up inside and
cause fire.
Do not apply any load other
than the TV on the Wall-Mount
Bracket.
If you do so, the TV
may fall and cause
injury or property
damage.
Do not lean on or hang from
the TV.
Do not lean on or hang
from the TV as it may
fall on you and cause
serious injury.
Do not expose the TV to rain or
moisture.
It may cause a fire or an electric
shock.
Never place the TV in hot,
humid or excessively dusty
places, or in the place where
the TV is subjected to
mechanical vibrations.
If you do so, it may cause a fire or an
electric shock.
Keep flammable objects or
open flames (e.g. candles)
away from the TV.
To prevent a fire, keep flammable objects
or open flames (e.g. candles) away from
the TV.

5(GB)
CAUTION
If the following precautions are
not observed, injury or property
damage may occur.
Do not install the Wall-Mount
Bracket on wall surfaces where
the corners or the sides of the
TV protrude away from the
wall surface.
Do not install the Wall-Mount Bracket on
wall surfaces such as a pillar, where the
corners or the sides of the TV protrude
away from the wall surface. If a person
or object happens to
hit the protruded
corner or side of the
TV, it may cause
injury or property
damage.
Do not handle the product
with excessive force during
cleaning or maintenance.
Do not apply excessive force on the
topside of the TV. If you do so, the TV
may fall and cause injury or property
damage.
Do not install the TV over or
under an air-conditioner.
If the TV is exposed to water leaks or air
current from an air-conditioner for a
long time, it may cause a fire, an electric
shock or a malfunction of the TV.
Precautions
•If you use the TV installed on the Wall-
Mount Bracket for a long time, the
wall behind or above the TV may
become discolored or the wallpaper
may come unstuck, depending on the
material of the wall.
•If the Wall-Mount Bracket is removed
after installing it on the wall, the screw
holes are left.
•If you have routed 300-ohm feeder
cables behind the wall, we recommend
that you change them to 75-ohm
coaxial cables.
If it is necessary to continue to use 300-
ohm feeder cables, be sure there is
sufficient space available between the
TV and the feeder cables behind the
wall before installing. Consult your
licensed contractor regarding an
appropriate location (free from radio
noise, etc.) before installing.

6(GB)
Installing the Wall-
Mount Bracket
To Sony Dealers
WARNING to Customers
Sufficient expertise is required for
installing this product. Be sure to
subcontract the installation to Sony
dealers or licensed contractors and
pay special attention to safety
during the installation.
To Sony Dealers
The following instructions are for
Sony Dealers only. Be sure to read
safety precautions described above
and pay special attention to safety
during the installation, maintenance
and checking of this product.
Be sure to install the Wall-
Mount Bracket securely to the
wall following the instructions
in this instruction manual.
If any of the screws are loose or fall out,
the Wall-Mount Bracket may fall and
cause injury or property
damage. Be sure to use the
appropriate screws for the
material of the wall and
install the unit securely,
using six M4 ×20 mm
(13/16 inches) or
equivalent screws.
Be sure to use the supplied
screws and attachment parts
properly following the
instructions given in this
instruction manual. If you use
substitute items, the TV may
fall, and cause bodily injury to
someone or damage to the TV.
Be sure to tighten the screws
securely in the designated
position.
If you fail to do so, the TV may fall, and
cause bodily injury to someone or
damage to the TV.

7(GB)
Be careful not to subject the TV
to shock during installation.
If the TV is exposed to shock, it may fall
or break apart. This may cause injury.
Be sure to install the TV on a
wall that is both perpendicular
and flat.
If you fail to do so, the TV may fall and
cause injury.
After proper installation of the
TV, secure the cables properly.
If people or objects get tangled in the
cables, this may result in injury or
damage to the TV.
Do not allow the mains lead or
the connecting cable to be
pinched.
If the mains lead or the connecting cable
is pinched between the unit and the wall
or is bent or twisted by force, the internal
conductors may become exposed and
cause a short circuit or an electrical
break. This may cause a fire or an electric
shock.
Be careful not to hurt your
hands or fingers during the
installation.
Be careful not to hurt your hands or
fingers when installing the Wall-Mount
Bracket or the TV.

8(GB)
Step 2: Deciding on
the installation
location
Decide the location on the wall to install
the TV.
Then, place bracket Aon the installation
location and mark the four screw holes
on the wall using a pencil.
Before marking, make sure that the
distance between the upper edge of
bracket Aand the ceiling and that
between the side edge of bracket Aand
the side wall are 20 cm (7 7/8inches) or
more.
Note
•Attach bracket Alevel with the floor.
•The wall should be capable of supporting a
weight of at least four times the TV weight.
Before installing, confirm that the wall has
sufficient strength to support the TV and
the Wall-Mount Bracket. If the wall does
not have sufficient strength, reinforce it
adequately before installing.
Before installation
Before installation, be sure to refer to
the Leaflet (“Installing the Wall-
Mount Bracket”) supplied with the
TV.
Step 1: Checking the
parts required for the
installation
Check all the parts are included in the
package.
Bracket A(1)
Bracket B(1) Screws (2)
Bracket A
Ceiling
20 cm (7 7/8inches) or
more
Wall
Mark this
portion using
a pencil.
20 cm
(7 7/8
inches) or
more

9(GB)
Step 3: Attach
bracket Ato the wall
1Insert four M4 ×20 mm (13/16
inch) screws (or equivalent)
that are adequate for the wall
in the positions marked in Step
2 (page 8). Never use any
supplied screws to fix the
bracket to the wall.
Do not tighten the screws
completely for the moment. Keep
a space of 2 to 3 mm (3/32 to 1/8
inch) from the wall.
2Press bracket Ato the wall and
slide it down. Then fully
tighten the four screws on the
wall.
v
Wall
2–3 mm
(3/32–1/8inch)
20 mm
(13/16 inch)
Wall
Bracket A
Wall
Screws (not supplied)
Bracket A
Bottom
Top

10 (GB)
Step 4: Attach
bracket Bto the TV
Before attaching bracket B, remove the
rear cover and disconnect the AC power
adapter and all the cables from the TV.
For how to remove the rear cover of the
TV, refer to the Operating Instructions
supplied with the TV.
1Remove the four screws as
illustrated below, and detach
the TV stand from the TV.
To prevent damaging the surface
of the LCD display, place the TV
on a soft mat.
Notes
•Lay the display face down on a
stable and level surface, with the
base of the stand facing out. Putting
the display face and the base of the
stand on the same level surface will
cause the TV to incline and
therefore be unstable.
•When removing the TV stand, hold
it firmly.
3Insert two M4 ×20 mm (13/16
inch) screws (or equivalent)
that are adequate for the wall
in the screw holes, and tighten
them securely in the order 1
then 2as shown below. Never
use any supplied screws to fix
the bracket to the wall.
Bracket A
2
1
Screws (not
supplied)
Soft mat
Rear of the TV
TV stand
Table
Remove these screws.