Sony STR-DN1050 Reference guide

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Use this Help Guide when you have any questions on how to use the receiver.
In this Help Guide, STR-DN1050 is used for illustration purposes unless when otherwise indicated.
The picture above is of the STR-DN1050.
Preparation
Enjoying Video and Sound
Using Network Features
Using BLUETOOTH Features
Using the Multi-Zone Features (for STR-DN1050 only)
Using Other Features
Adjusting Settings
Parts and Controls
Announcements
Troubleshooting
Help Guide

Table Of Contents
STR-DN1050/STR-DN850 Help Guide i............................................................................................
Preparation 1.....................................................................................................................................
Before using 12...........................................................................................................................
Installing and connecting speakers 13........................................................................................
Connecting audio-visual devices and the antennas (aerials) 14.................................................
Connecting to the network 15......................................................................................................
Turning on the receiver/preparing the remote control 16............................................................
Initial setup of the receiver 17......................................................................................................
Enjoying Video and Sound 2.............................................................................................................
Basic operations 18.....................................................................................................................
Playing content from an iPhone/iPod 19.....................................................................................
Playing content from a USB device 20........................................................................................
Listening to the radio 21..............................................................................................................
Enjoying sound effects 22...........................................................................................................
Using Network Features 3.................................................................................................................
About network features 23...........................................................................................................
Setting up a wired LAN connection (for wired LAN connections only) 24...................................
Setting up a wireless LAN connection (for wireless LAN connections only) 25...........................
Enjoying audio content stored on a server on the home network (DLNA) 26..............................
Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (
AirPlay) 27...................................................................................................................................
Enjoying internet music services 28............................................................................................
Controlling the receiver using a smartphone or tablet device (TV SideView) 29.........................
Controlling the receiver using a smartphone or tablet device (SongPal) 30................................
Setting whether to control this receiver from a device on the home network 31.........................
Using BLUETOOTH Features 4........................................................................................................
Enjoying audio content stored on a BLUETOOTH device 32......................................................
Using the Multi-Zone Features (for STR-DN1050 only) 5.................................................................
Enjoying sound in two rooms 33..................................................................................................
Using the Multi-Zone Features (for STR-DN1050 only) 5............................................................
Using Other Features 6.....................................................................................................................
Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) 35........................................
Configuring video and sound settings 36....................................................................................
Saving and recalling various settings for the receiver (Custom Preset) 37.................................
Configuring speaker settings 38..................................................................................................
Using the sleep timer 182............................................................................................................
Checking information on the receiver 40.....................................................................................
Adjusting Settings 7...........................................................................................................................
TOC-1

Easy Setup 41.............................................................................................................................
Speaker Settings 42....................................................................................................................
Audio Settings 43........................................................................................................................
HDMI Settings 44........................................................................................................................
Input Settings 45..........................................................................................................................
Network Settings 46....................................................................................................................
Bluetooth Settings 47..................................................................................................................
Zone Settings (for STR-DN1050 only) 48....................................................................................
System Settings 49......................................................................................................................
Using the menu on the display panel 50.....................................................................................
Reverting to the factory default settings 230...............................................................................
Parts and Controls 8..........................................................................................................................
Receiver 52.................................................................................................................................
Remote control 239.....................................................................................................................
Announcements 9..............................................................................................................................
Specifications 241.......................................................................................................................
Trademarks 248..........................................................................................................................
Software License Information 250...............................................................................................
Troubleshooting 10............................................................................................................................
Error messages 57......................................................................................................................
Power 58.....................................................................................................................................
Image 59......................................................................................................................................
Sound 60.....................................................................................................................................
Tuner 61......................................................................................................................................
iPhone/iPod 62............................................................................................................................
USB devices 63...........................................................................................................................
Network connection 64................................................................................................................
Home network 65........................................................................................................................
AirPlay 66....................................................................................................................................
Music Services 67.......................................................................................................................
BLUETOOTH device 68..............................................................................................................
“BRAVIA” Sync (Control for HDMI) 69........................................................................................
Remote control 70.......................................................................................................................
If the problem is not solved 71.....................................................................................................
TOC-2

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Supplied accessories
Startup Guide (1)
Reference Guide (1)
Remote control (1)
R03 (size AAA) batteries (2)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Optimizer microphone (1)
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
73

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Function for conversion of video signals
The receiver is equipped with a function for converting video signals. Video signals and component video signals can be
output as HDMI video signals (*1).
The correspondence of the INPUT jacks to the OUTPUT jacks is shown below.
HDMI IN: HDMI OUT
COMPONENT VIDEO IN (for STR-DN1050 only): HDMI OUT (*1), COMPONENT VIDEO MONITOR OUT (*2)
VIDEO IN: HDMI OUT (*1), MONITOR OUT (*2)
*1 For STR-DN1050 only. Video signals are upconverted when output (up to 4K).
*2 The same type of signal as the input signal is output.
Note
When video signals from a VCR, etc., are upconverted on this receiver and then viewed on your TV, the image on the
TV screen may appear distorted horizontally or no image may be seen depending on the status of the video signal
output.
If you are using image improvement circuitry with your VCR, it may impact the video signal conversion. It is
recommended that you turn off this function on your VCR.
Converted HDMI image output does not support “x.v.Color (x.v.Colour),” Deep Color (Deep Colour), or 3D.
HDMI video signals cannot be converted to component video signals or video signals.
1080p component video signals cannot be upconverted.
When [4K Scaling] is set to [Auto], if the HDMI input signals are [email protected]/24 Hz and a 4K-compatible TV is
connected, the HDMI input signals are automatically upscaled to 4K images and output from the HDMI OUT jack.
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
74

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Digital audio formats supported by the receiver
The digital audio formats that this receiver can decode depend on the digital audio output jacks of the connected device.
This receiver supports the following audio formats. The words in brackets are those indicated on the display panel.
Dolby Digital [DOLBY D]
Maximum number of channels: 5.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
Dolby Digital EX [DOLBY EX]
Maximum number of channels: 6.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
Dolby Digital Plus [DOLBY D +] (*1)
Maximum number of channels: 7.1
Connection with the receiver: HDMI (*2)
Dolby TrueHD [DOLBY HD] (*1)
Maximum number of channels: 7.1
Connection with the receiver: HDMI
DTS [DTS]
Maximum number of channels: 5.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
DTS-ES Discrete [DTS-ES Dsc]
Maximum number of channels: 6.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
DTS-ES Matrix [DTS-ES Mtx]
Maximum number of channels: 6.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
DTS 96/24 [DTS 96/24]
Maximum number of channels: 5.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI (*2)
DTS-HD High Resolution Audio [DTS-HD HR] (*1)
Maximum number of channels: 7.1
Connection with the receiver: HDMI (*2)
DTS-HD Master Audio [DTS-HD MA] (*1)
Help Guide
75

Maximum number of channels: 7.1
Connection with the receiver: HDMI
DSD [DSD] (*1)
Maximum number of channels: 5.1
Connection with the receiver: HDMI
Multi Channel Linear PCM (*1) [PCM]
Maximum number of channels: 7.1
Connection with the receiver: HDMI (*2)
*1 Audio signals are output in another format if the playback device does not correspond to the actual format. For details, refer to
the operating instructions of the playback device.
*2 These formats are compatible with MHL when you connect a MHL-compatible source device to the HDMI/MHL (VIDEO 2 IN)
(for STR-DN1050 only), HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack.
4-488-938-11(3)
Copyright 2014 Sony Corporation
76

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Notes on connecting cables
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected
device.
Use a High Speed HDMI cable. 1080p, Deep Color (Deep Colour), 4K or 3D images may not be displayed properly if
you use a Standard HDMI cable.
We do not recommend using an HDMI-DVI conversion cable. If you connect an HDMI-DVI conversion cable to a DVI-
D device, the sound and/or image may be lost. Connect separate audio cables or digital connecting cables, then
reassign the input jacks if the sound is not output correctly. For details, see “Using other video/audio input jacks (Input
Assign).”
When connecting optical digital cables, insert the plugs straight until they click into place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
If you want to connect several digital devices, but cannot find an unused input
See “Using other video/audio input jacks (Input Assign).”
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
77

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Using HDMI connections
High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format.
Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. See “Interlocking other
devices using an HDMI connection (“BRAVIA” Sync).”
HDMI features
Digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver. This signal
supports Dolby Digital, DTS, DSD, and Linear PCM. For details, see “Digital audio formats supported by the receiver.”
The receiver can receive Multi Channel Linear PCM (up to 8 channels) with a sampling frequency of 192 kHz or less
via an HDMI connection.
Analog video signals input to the receiver’s VIDEO jack or COMPONENT VIDEO jacks can be output as HDMI signals
(for STR-DN1050 only). Audio signals are not output from the HDMI OUT jack(s) while the image is being converted.
This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color (Deep Colour),
“x.v.Color (x.v.Colour),” and 4K or 3D transmission.
To enjoy 3D images, connect a 3D-compatible TV and video device (Blu-ray Disc player, Blu-ray Disc recorder,
PlayStation 3, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play 3D-compatible
content.
To enjoy 4K (HDMI BD/DVD, GAME, SAT/CATV, VIDEO1) images, connect a 4K-compatible TV or video device (Blu-
ray Disc player, etc.) to the receiver using High Speed HDMI cables, and then play 4K-compatible content (for STR-
DN1050 only).
Note
Depending on the TV or video device, 4K or 3D images may not be displayed. Check the HDMI video formats
supported by the receiver.
Refer to the operating instructions of each connected device for details.
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
78

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Using MHL (Mobile High-Definition Link) connections
MHL (Mobile High-Definition Link) is an HD video and digital audio interface for connecting mobile phones and portable
devices to HDTVs and other home entertainment products. MHL can support 1080p HD video and digital audio signals
and supply power to the mobile device simultaneously. It also enables the remotes of TV and other home entertainment
products to control the mobile phone and access its content.
Note
MHL-compatible mobile devices are charged when connected to the HDMI/MHL (VIDEO 2 IN) (*1), HDMI VIDEO 1 IN
(MHL) (*1) or HDMI VIDEO IN (MHL) (*2) jacks of the receiver while the receiver is turned on, or while the receiver is
turned off when [Pass Through] is set to [On] (*3) or [Auto], or [Network Standby] (*4) is set to [On].
*1 For STR-DN1050 only
*2 For STR-DN850 only
*3 For USA, Canadian, Mexican, and Australian models only
*4 For USA, Canadian, and Australian models only
Related Topic
Changing the name for each input (Name)
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
79

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Installing speakers
This receiver allows you to use up to a 7.2-channel system (7 speakers and two subwoofers).
Typical examples of speaker system configurations are as follows.
5.1-channel speaker system
To fully enjoy theater-like multi-channel surround sound, you need five speakers (two front speakers, a center speaker,
and two surround speakers) and a subwoofer.
7.1-channel speaker system using surround back speakers
You can enjoy high-fidelity reproduction of recorded sound from a DVD or Blu-ray Disc in 6.1-channel or 7.1-channel
format.
7.1-channel speaker system using front high speakers
You can enjoy vertical sound effects by connecting an additional two front high speakers.
Note
You cannot use the surround back speakers and the front high speakers simultaneously.
Related Topic
Connecting speakers
Connecting the speakers in zone 2 (for STR-DN1050 only)
Connecting another amplifier in zone 2 (for STR-DN1050 only)
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
80

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting speakers
Connect each speaker as illustrated below.
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
For details on how to connect speaker cables to the receiver, see “How to connect speaker cables.”
Monaural audio cable (not supplied)
Speaker cable (not supplied)
*1 If you connect a subwoofer with an auto standby function, turn off this function when watching movies. If the auto standby
function is turned on, it switches to standby mode automatically based on the level of the input signal to the subwoofer, and the
sound may not be output.
*2 Notes on connections to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals
If connecting only one surround back speaker, connect it to the L (+/-) terminals.
If you have an additional front speaker system, connect it to these terminals. In this case, perform the following
procedure:
1. Select [Speaker Connection] in the Speaker Settings menu, then select a speaker pattern that does not have
surround back and front high speakers.
Help Guide
81

2. Set [SB Speaker Assign] in the Speaker Settings menu to [Front B].
You can select the front speaker system you want by using the SPEAKERS button on the receiver.
You can connect the front speakers to this terminal using a bi-amplifier connection. In this case, set [SB Speaker
Assign] in the Speaker Settings menu to [Bi-Amp].
Note
After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker
Connection] in the Speaker Settings menu.
Related Topic
Notes on connecting cables
Using bi-amplifier connections
Connecting the speakers in zone 2 (for STR-DN1050 only)
Connecting another amplifier in zone 2 (for STR-DN1050 only)
Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Connection/SB Speaker
Assign)
4-488-938-11(3)
Copyright 2014 Sony Corporation
82

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting the speakers in zone 2 (for STR-DN1050 only)
You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, you can
watch a DVD in the main zone and listen to a CD in zone 2.
Connect each speaker as illustrated below.
Be sure to disconnect the AC power cord (mains lead) before connecting cables. For details on how to connect speaker
cables to the receiver, see “How to connect speaker cables.”
Speakers
Speaker cable (not supplied)
Note
When using this zone 2 connection, you need to set up the SPEAKERS SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B/ZONE 2 terminals. For details, see “Setting the speakers for zone 2 (for STR-DN1050 only).”
Related Topic
Notes on connecting cables
4-488-938-11(3)
Copyright 2014 Sony Corporation
Help Guide
83

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting a TV (for STR-DN1050)
Connect a TV to the HDMI OUT or MONITOR OUT jack. You can operate this receiver using a GUI (Graphical User
Interface). GUI is used only for HDMI OUT A and HDMI OUT B.
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI
connection
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI
connection
The solid lines show recommended connections and the dashed lines show alternative connections.
Help Guide
84

Optical digital cable (not supplied)
Audio cable (not supplied)
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Connecting a TV without HDMI jacks
The solid lines show recommended connections and the dashed lines show alternative connections.
85

Component video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Optical digital cable (not supplied)
Note
Connect a TV monitor or a projector to the HDMI OUT or MONITOR OUT jack on the receiver.
Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may
be distorted. If this is the case, place the antenna (aerial) farther away from the receiver.
When connecting an optical digital cable, insert the plugs straight until they click into place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
The receiver has a video conversion function. For details, see “Function for conversion of video signals.”
When connecting a TV to the receiver via the TV IN jacks of the receiver, set the sound output jack of the TV to
[Fixed] if it can be switched between either [Fixed] or [Variable].
Related Topic
Notes on connecting cables
Enjoying sound of TV broadcasts from the receiver
86

Controlling HDMI devices (Control for HDMI)
Passing HDMI signals through (Pass Through)
Setting the HDMI audio signal output of connected devices (Audio Out)
4-488-938-11(3)
Copyright 2014 Sony Corporation
87

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting a TV (for STR-DN850)
Connect a TV to the HDMI TV OUT or MONITOR OUT jack. You can operate this receiver using a GUI (Graphical User
Interface). GUI is used only for HDMI TV OUT.
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI
connection
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI
connection
The solid lines show recommended connections and the dashed lines show alternative connections.
Help Guide
88

Optical digital cable (not supplied)
Audio cable (not supplied)
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Connecting a TV without HDMI jacks
The solid lines show recommended connections and the dashed lines show alternative connections.
89