Sony KDL-60NX801 User manual

S ON'&r_ 4-178-676-16(1)
LCD
Digital Color TV
Setting up your TV
To watch TV
Additional Information
BRAVlA
Sony Customer Support
U.S.A.: www.sony.com/tvsupport
Canada: www.sony.ca!support
United States Canada
1.800.222.SONY 1.877.899.SONY
Please Do Not Return
the Product to the Store

Owner's Record
The model and serial numbers are
located on the side and rear of the TV.
For KDL NXS00 series models, they
can be lbund by removing the bottom
cover. Record these numbers in the
spaces provided below. Rel_r to them
whenever you call upon your Sony
dealer regarding this TV.
Model Name
Serial No,
CAUTION
To prevent electric shock and blade exposure.
do not use this polarized AC plug with an
extension cord, receptacle or other outlet
unless the blades can be lully inserted.
• Operate the TV only on 110-240 V
AC (U.S.A./Canada 120 V AC)
• Avoid operating the TV at
temperatures below 41°F (5°C).
Licensing Information
Macintosh is a tradenmrk of Apple Inc.,
registered in the U.S. and other countries.
HDMI, tile HDMI logo and High-Definition
Multimedia luterlhce are trademarks or
registered trademarks of HDMI Licensing,
LLC.
Fcrgason Paleut Properties, LLC:
U.S. Pment No. 5,717,422
U.S. Pment No. 6.816,141
Manufactured under license l?om Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
In the United States, TV Guide and TV Guide
On Screen are registered trMemarks of TV
Guide Enteltaimneut Group, Inc. and/ur its
subsidiaries or affiliates, and ate used under a
license by Gemstar-TV Gnkle International,
Inc. and/ur its subsidiaries. In ( _mada, TV
Gnkle isa registered mark of Tr_mscoutinental
Inc., and is used under a license by Gemsta>TV
Guide International, Inc. and/ur its subsidiaries.
The TV Guide On Screen system is
manufi_ctured under license from Gemstar-TV
Gnkle International, Inc. and/ur its subsidiaries.
The TV Guide On Screen system is protected
by one or more of the lbllowing United States
patents 6,498,895; 6,850,693; 6,396,546;
5,940,073; 6,239,794 to Gemstar-TV Guide
International, Inc. and/or its subsidiaries.
Gemstar-TV Guide International, Inc. and/or
its related affiliates are not in any way liable
lbr tile accuracy or availabiliu of the program
schedule inlbrmation or ()tiler data in the TV
Guide On Screen system and cannot
guarantee service availability in your area. In
no event shall Gemsmr-TV Guide
International, Inc. and/or its related affiliates
be liable fk)r any damages in couuectkm with
the accuracy or availability of the program
schedule inlbrmation or other data in the TV
Guide On Screen system.
Blu-ray Disc is a trademark.
"BRAVIA" and 113RAV IA, S-Force,
Motkmflow, BRAVIA Sync, and [] are
trademarks or registered marks of Sony
Corporalion.
"XrossMediaBar" is a trademark of Sony
Corporalion. "XMB" is a trademark of Sony
Corporalion and Sony Computer
Entertainment Inc.
"PlayStatiou" is a registered trademark and
"PS3" is a trademark of Sony Computer
Entertainment Inc.
DLNA ®,the DLNA Logo and DLNA
CERTIFIED _Mare trademarks, service
nmrks, or certification marks of the Digital
Living Network Alliance.
IDT¢" m OOLB¥,
.............. ......... D|G|TAL ]
H 3m|
dlna
CERTIFIED '_
Your BRAVIA TV is
ENERGY STAR ° qualified
in the "Home" mode.
It meets strict energy
efficiency guidelines set by _tR[,'iNR
the U.S. Environmental
Protection Agency and
Department of Energy. ENERGY STAR is a
joint program of these government agencies.
designed to promote energy efficient products
and practices.
Changes to certain ligatures, settings, and
fimctioualities of this TV (i.e. TV Guide,
Picture/Sound, Light Sensor, Power Savings)
can increase or change the power
cousl.lnlptiou.
Depending upon such changed settings, the
power consumption may exceed the limits
required [k)rthe ENERGY STAR
qualification in the "Home" mode.
• The illustrations of the remote
control used in this manual are of the
RM-YD037 unless otherwise stated.
The BRAVIA ®Full HDTV Experience
Thank you for choosing Sony! Your new BRAVIA °_
TV opens the door to the "Full HDTV Experience."
This document will help you get the most out of your
TV.
Please take a moment to register your TV at:
U.S.A.: http://productregistration.sony.com
Canada: http://www.SonyStyle.ca/registration
Four Steps to a Full HD Experience
Set, Source, Sound, and Setup.
1Set
Now that you have made the best selection in LCD TV
technology, be sure to remove all accessory contents
fl'om the packaging before setting up your TV.
2Source
To experience the stunning detail of your BRAVIA TV,
you need access to HD programming.
• Upgrade your signal or content source to high-
definition (HD) by contacting your HD service
provider.
• Receive over-the-air HD broadcasts with an HD-
quality antenna connected directly to the back of
your TV.
Visit www.antennaweb.org for more
information on antenna selection and setup.
• Discover the wealth of entertainment now available
on super-high resolution Blu-ray Disc "IMplayer and
other Sony HD equipment.
3Sound
Complete the high-definition experience with a
BRAVIA Sync TM surround sound system or A/V
receiver fl'om Sony.
4 Setup
Install your TV and connect your sources. See page 8
for sample connection diagrams.
To help assure the highest quality for your HD experience,
use Sony HDMI (High-Definition Multimedia Interface)
cables.
To learn more about HDTV, visit:
U.S.A.: http://www.sony.com/HDTV
Canada: http://www.SonyStyle.ca/hd
This TV displays all video input signals in a resolution of 1,920 dots x 1,080 lines.
2

Table of Contents
Checking the accessories .............................................................................................................. 4
Inserting batteries into the remote control ..................................................................................... 4
Setting up your TV
Attaching the Table-Top Stand ...................................................................................................... 6
Connecting the TV ......................................................................................................................... 8
Securing the TV ........................................................................................................................... 12
Organizing the AC power cord .................................................................................................... 13
Running initial setup .................................................................................................................... 14
Detaching the Table-Top Stand from the TV............................................................................... 14
Using a Wall-Mount Bracket ........................................................................................................ 15
Installing the TV Against a Wall or Enclosed Area ...................................................................... 15
To watch TV
To watch programs ...................................................................................................................... 16
To use the TV features ................................................................................................................ 16
To use i-Manual ........................................................................................................................... 17
Additional Information
Troubleshooting ........................................................................................................................... 18
Specifications .............................................................................................................................. 20
• Operating instructions are built into your BRAVIA TV. Refer to "To use i-Manual" for operation
(page 17).
• Retain this manual for future reference.
3

Checking the accessories
AC power cord (1)
Table-Top Stand (1).1
(except KDL-60NX801 and KDL-60NX800
models)
Bottom Cover (1)*2
(for KDL-60/52NX801 and KDL-60/52/
46NX800 models)
Stand Rear Cover (1)*3
Fixing screws for Table-Top Stand
(M5 x 16) (4)
(except KDL-60NX801 and KDL-60NX800
models)
Assembling Screws for Table-Top Stand
(MS x 16) (4)
(for KDL-40NX700 model)
Black Spacers (4)*4
(for KDL-52NX801 and KDL-52/46NX800
models)
Silver Spacers (4) *4
(for KDL-60NX801 and KDL-60NX800
models)
Screws (M6 x 20) (4) *4
(for KDL-60NX801 and KDL-60NX800
models)
Remote control (1)*s
Size AAA batteries (2)
* 1 KDL-40NX700 model requires assembling.
Refer to other leaflet to assemble the Table-Top
Stand.
*2 KDL-60NX801/KDL-60NX800 models are
shipped with the Bottom Cover attached to the
TV.
*3 KDL-60NX801/KDL-60NX800 models are
shipped with the Stand Rear Cover attached to
the TV.
*4 These screws and spacers are required when
installing an optional Wall-Mount Bracket. You
must use these screws instead of the ones
provided with the bracket for safety reasons. Be
sure to keep them in a safe place until you are
ready to use the Wall-Mount Bracket.
*5 Please refer to the model name printed on the
remote control.
Inserting batteries into the
remote control
iiiiiiii
Slide the cover to open.
Guidelines for Remote Control
•Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.
\\
4

Programming the Remote Control
Your remote control can be programmed to use other equipment and is pre-programmed to operate
the following Sony equipment.
DVD DVD Player 31033
AMP Receiver 52172
STB Digital Satellite 01639
Programming Other Equipment
_
2-
_
_
_ii#!iiiii{iiiiiiiiiiiiiiii_i_i_i_i_!
_4
Follow the steps below to program your TV remote control.
1Look for the code in the Manufacturer's Code List (referto i-Manual) that
corresponds to the equipment you would like to operate with the Sony
remote control. If more than one code is provided, try programming the
first code listed. If your equipment's code is not listed, visit
http://esupport.sony.com/remotecodes for a more comprehensive list.
2Press and hold a DVD, AMP or STB function button simultaneously with
INPUT button and release.
When in the programming mode, the function button (DVD, AMP, STB)
blinks for approximately 30 seconds until a code is entered.
3Enter the five digit code using - while the function buttons
(DVD, AMP. STB) are lit. If the code is not entered within 30 seconds,
you must repeat step 2.
4Press C) or ENT to confirm the code. If successfully programmed, the
function button (DVD, AMP. STB) will blink twice, if not, it blinks five
times.
Confirm the Programming
If you can turn your equipment on and off using the green POWER button, tile programming is
complete. If not, try the next code listed.
• In somecases, you maynot be able to program your remote control. If this is the case, use your equipment's
ownremote control.
• Any of the function buttons (DVD,AMP,STB) can be programmed to operate otherequipment regardless of
the labeling. For example, if programmed with the correct code, a Blu-rayDisc player can beoperated with
the DVDbutton. This is useful if yourequipment does not match any of the labeled buttons.
To reset the remote control to the factory default:
Press SCENE, TV POWER, and Q simultaneously. Tile four function buttons (DVD, AMP, STB,
and TV) blink when successfully reset.
5

Setting up your TV
Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to
a wall right away. If you are not mounting the
TV to a wall, you will need to attach the Table-
Top Stand. You will need a Phillips
screwdriver and the supplied screws to
complete the task. Look for the attachment
instructions provided with the TV.
Be sure to consider the following while setting
up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number of
people; larger size TVs require two or more
people.
• Correct hand placement while carrying the
TV is very important for safety and to avoid
damage.
]Gently slide the TV unit onto the
Table-Top Stand and align the screw
holes.
• Do not put stress on the LCD panel or the frame
around the screen.
° Be careful to notpinch your hands orthe AC
power cord when you install the TV unit to the
Table-Top Stand.
Ensure your TV has adequate ventilation,
see page 15.
For best picture quality, do not expose the
screen to direct illumination or sunlight.
Avoid installing the TV in a room with
reflective wall and floor materials.
Avoid moving the TV from a cold area to a
warm area. Sudden room temperature
changes may cause moisture condensation.
This may cause the TV to show poor picture
and/or poor color. Should this occur, allow
moisture to evaporate completely before
powering the TV on.
2Use the supplied screws to attach the
TV unit to the Table-Top Stand.
• If you use an electric screwdriver, set the
tightening torque at approximately 1.5N.m
{15kgf.cm}.
3After all the screws are tighten cover
the Table-Top Stand with the supplied
Stand Rear Cover.
Attaching the Table-Top
Stand (except KDL-60NX801 and
KDL-60NX800 models)
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment for
some TV models.
6

Adjusting the viewing angle
This TV can be adjusted within tile angles shown below (except KDL-60NX801 and
KDL-60NX800 models).
0 o
"-t
Remove screw as
shown.
234
Lift up and tilt.
• Reverse the steps when readjusting the angle back to 0 degree.
Slide in.
Install screw into the
top screw hole of the
Table-Top Stand.
7

Connecting the TV
The following chart shows the high-definition (HD) and standard-definition (SD) video formats
supported by your BRAVIA TV inputs.
iNPUT VIDEO AUDIO SUPPORTEDFORMATS
1080/24p 1080p 1080i 720p 480p 480i PC*
HDMI 1 When HDMI is connected
HDMI 2 to DVl with an adapter,
HDMI 3 a separate Audio L/R is
.D .DM,, oecessory.
OOMPO.E.T Audio L/R
*For supported PC formats refer to the i-Manual.
8

Shown with a Set Top Box with HDMI
connection Shown with a Set Top Box with COMPONENT connection
Set Top Box Set Top Box
Cable System or VHF/UHF Antenna System
Cable
__ or
Antenna
(Continued) 9

Shown with HD BRAVIA ®SyncTM Basic Connection
*Rear of TV
£D
No
tlDEO
_0_ @
_uolo
r_mlcAL_
[C' E_ o
@
*A/V Receiver
*Blu-ray Disc
HD Cable Box or
HD Satellite Receiver
SAT j _'£, °°_'_°_'_ _ _:_.......
(Dish) c:__
Cable/ _,' ou .....
Antenna * Signifies a BRAVIA Sync capable device.
Shown with HD Basic Connection with Home Theater System
Rear
N
of TV
_""" Antenna
Blu-ray Disc/DVD
Cable/SAT_ (Dish)_ SD Cable Box or
SD Satellite Receiver
m
;_ _,,i__ ............. ,_
/,'_, or 0
Home Theater System
Side Panel
10

Shown with PC Connection with SD VCR/DVD
Rear of TV
i
iD
iARC
lJlJt
II_
iNN
i
i
l
i--
INN
II O)
i
;i!¸ _
VCR
Cable/Antenna
;.or
U _J
k PC
VCR/DVD Combo _ DVD
Side Panel
"-,I
11

Securing the TV
Sony strongly recommends
taking measures to prevent the
TV from toppling over.
Unsecured TVs may topple and
result in property damage,
serious bodily injury or even
death.
Preventing the TV from
Toppling
• Secure tile TV to a wall and/or stand.
• Do not allow children to play or climb on
furniture and TV sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
- slippery, unstable and/or uneven surfaces.
-furniture that can easily be used as steps,
such as a chest of drawers.
• Install the TV where it cannot be pulled,
pushed, or knocked over.
• Route all AC power cords and connecting
cables so that they are not accessible to
curious children.
Recommended Measures to
Secure the TV
Consider the following measures when
securing your TV to a TV stand (not supplied).
1Secure the Stand for the TV.
Make sure the TV stand can adequately
support the weight of the TV. Use two angle
braces (not supplied) to secure the stand. For
each angle brace use the appropriate hardware
to:
• Attach one side of the angle brace to the
wall stud.
• Attach the other side to the TV stand.
_ _gt Iseubpr_li%%)
Stand
2 Secure the TV to the Stand.
Use the optional hardware listed below (not
supplied):
• M4 x 16 machine screw (screwed into the
TV's Table-Top Stand)
• A screw or similar (attach it to the TV
stand)
• Rope or chain (strong enough to support the
weight of the TV). Make sure that there is
no excess slack in the rope or chain.
An alternative way to secure the TV is with an
optional Sony Support Belt Kit.
TaNa-TopStand
Contact SonyCustomer Support to obtain the
optional Support Belt Kitby providing your TV
model name.
• For United States call: 1-800-488-7669 orvisit:
www.sony.com/accessories
° For Canadacall: 1-877-899-7669
12

3Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
* Your TV is shipped with screws attached to the
rear of the TV. (They are fastened in the screw
holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV on a
wall.
* Securing the TV to the stand without securing the
TV and the stand to the wall provides minimum
protection against the TV toppling over. For
further protection, be sure to follow the three
measures recommended.
Anchor bolts (not supplied)
Wall-
mount
holes
Rope or
...... chain
(not
supplied)
Organizing the AC power
cord
° After the AC power cord is thread as illustrated,
place the bottom cover (for NX800 series only).
",.t
Wall-anchor
(not
supplied)
13

Running initial setup
1
......
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2Check the ENERGY SAVING
SWITCH setting is on (0).
3Press (.Don the TV.
When you switch the TV on for the first
time, the Language menu appears on
the screen.
•The TV image shown here may differ from your
TV but the operation of your TV remains the same
as indicated.
4Follow the instructions on the screen.
•The ENERGY SAVING SWITCH must be on
(O) to set the clock and obtain program
information for the TV Guide.
•Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5Select Continue to scan for available
channels and enable the TV Guide On
Screen ® feature. If you receive
channels from a cable box or satellite
receiver and do not wish to use the
TV's built-in tuner, select Skip.
Selecting Skip will disable the TV
Guide On Screen feature, which is
only available when the TV's tuner is
used.
° If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
14
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with _ on
the TV.
• The NX700/NX800 series models must remove
the stand rear cover prior to detaching the Table-
Top Stand.
° Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
° When installing the TV on a wall, remove the four
screws from the rear of the TV. (They are fastened
in the screw holes for wall mounting.) Be sure to
store the removed screws in a safe place, keeping
them away from children (for KDL-60152NX801
and KDL-60152146NX800 models).
° When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of the
TV (for KDL-60152NX801 and KDL-601521
46NX800 models).

Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. Some larger size TV may
require detaching the Table-Top Stand; see
"Detaching the Table-Top Stand from the TV"
(page 14).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety reasons,
Sony strongly recommends that you use the
Wall-Mount Bracket designed for your TV
and the installation should be performed by
a Sony dealer or licensed contractor.
• Follow tile instruction guide provided with
the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing
this TV, especially to determine the
strength of the wall for withstanding the
TV's weight.
• Be sure to use the screws supplied with the
Wall-mount bracket when attaching the
mounting hooks to the TV set.
The supplied screws are designed so that
they are 8 mm to 12 mm in length when
measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ
depending on the Wall-mount bracket
model. Use of screws other than those
supplied may result in internal damage to
the TV set or cause it to fall, etc.
8-12 mm
Screw
(supplied with the
Wall-mount bracket)
MountingHook
Hookattachmenton rearofTV
set
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small children.
° Read the supplied Safety Booklet for additional
safety information.
Installing the TV Against a
Wall or Enclosed Area
Make sure that your TV has adequate
ventilation. Allow enough space around the TV
as shown below. Avoid operating the TV at
temperatures below 41 °F (5 °C).
Installed with stand
i [ 11 7/ainches '
4 inches
(10 cm)
i t
r_; 23/8 inches
Leave at least this much space around the set,
Installedon the wall
i 11 7/8 inches
(30 cm)
(10 cm) it _._{iO cm)
il I :: Leave at
i I - I_,_ least this
i I m ', much space
i.................. _{_4_Ln__c[__e__s_(!_0__c_m_)] around the
set.
Never install the TV set as follows:
Air circulationis blocked. Aircirculationisblocked.
• Inadequate ventilationcan lead to overheatingof
the TV and may cause damage to your TV or
cause afire.
".t
15

To watch TV
To watch programs
GUIDE
OPTIONS
HOME
0-9
ENT
1-O
2
1Turn on the TV.
2
O Check the ENERGY SAVING
SWITCH setting is on (0).
Press (.Don the TV or on the remote
control to turn on the TV. (You may
use the (D button located on the front
or back of the remote control.)
• The TV image shown here maydiffer from your
TV but the operation of your TV remains the
same asindicated.
Select a TV channel.
CH
To use the Guide
Press GUIDE to display the TV Guide On
Screen to view scheduled programs or to
select a program to watch. Press again to exit
the Guide. Use with 0-9 and ENT to select
digital channels. For example, to enter 2.1,
press , , , and ENT.
To use the TV features
PressHOME to display TV Home Menu/
XMB,-Mto access TV Settings and other
media and network related content.
MENU
16
Press OPTIONS to display a list of convenient
functions and menu shortcuts. The Options
menu items vary based on current input and/or
content.

To use i-Manual
1
2
Your BRAVIA TV comes with an on-screen
manual. You can browse your i-Manual anytime
you need to find the varieties of convenient
functions.
1Press i-MANUAL.
i-MANUAL
2Press _1_1<4_1@ to navigate and
select items.
o_
:3"
"d
_Welcome to i-Manual
_BRAVIA TV Features
_Watching TV
Introduces convenient features such as TV
Guide, Favorites, etc.
_Using the Home Menu
You can find how to customize your TV
settings, etc.
_Fun Features with Connected
Equipment
Introduces how to connect and enjoy optional
equipment.
_Parts Description
_Troubleshooting
You can find solutions for your problems.
_Index
• Images and illustrations may differ from what you are watching on this TV.
17

Troubleshooting
The TV will indicate any problems with the STANDBY indicator flashing in red.
When the STANDBY indicator is flashing
The self-diagnosis function is activated.
1Count how many times the STANDBY indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2Press @ on the TV to turn it off, disconnect the AC power cord, and inform your dealer
or Sony service center of how the indicator flashes (number of flashes).
When the STANDBY indicator is not flashing
1Check the items in the tables below. (Also refer to "Troubleshooting" in the i-Manual.)
2If the problem persists, contact Sony Customer Support (information provided on the
front cover).
Picture
There is no picture (screen
is dark) and no sound.
•Check the antenna/cable connection.
• Connect the TV to the AC power, and press (_) on the TV.
• If the STANDBY indicator lights up in red, press TV POWER
on the remote control.
Tiny black dots and/or • The screen is composed of pixels. Tiny black dots and/or bright
bright dots appear on the dots (pixels) on the screen do not indicate a malfunction.
screen.
The TV's power cannot be •Check to see the (0) mark on the ENERGY SAVING SWITCH
turned on. is pressed.
The TV turns off
automatically (the TV
enters standby mode).
• Check if the Sleep Timer, Timer, or Idle TV Standby is
activated.
• The Auto Shut-off function may be set to On. If Auto
Shut-off is activated and TV receives no signal, the TV will
automatically enter standby mode in 15 minutes. Check Auto
Shut-off is activated under Eco feature of this TV.
The remote does not
function. • Replace the batteries. • Your TV may be in SYNC mode. Press SYNC MENU, select TV
Control and then select Home (Menu) or Options to control
the TV.
The TV and its surrounding • When the TV is used for an extended period of time, the TV and
become warm. its surround may become warm to touch. This is not malfunction
of the TV.
The "Parental Lock"
password has been
forgotten.
• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)
18

How to Care for Your BRAVIA
Safety is very important, please read and follow the safety documentation (Safety Booklet)
separately provided.
Unplug the TV and other connected equipment from the wall
outlet before you begin cleaning your TV.
• Wipe the LCD screen gently with a soft cloth.
• Stubborn stains may be removed with a cloth slightly moistened with a
solution of mild soap and warm water.
• If using a chemically pretreated cloth, please follow the instruction
provided on the package.
• Never use strong solvents such as a thinner,alcohol orbenzine for cleaning.
• Do not plug in the TV into the walloutlet until the moisture from cleaning has evaporated.
The TV should also be placed on a stable surface to prevent it from toppling over (see page 12). If
you have young children or pets at home, check regularly to insure the TV is securely fastened.
O"
B"
19

Specifications
System
Television system NTSC: American TV s(andard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM (>11cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog lerrestrial: 2 - 69 /Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 /Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output lO W + lO W
Input/Output jacks
CABLE/ANTENNA 75-ohm external terminal for RF inputs
VIDEO 1N 1/2 VIDEO /AUDIO
COMPONENT 1N YPBPR (Component Video) /Signal format: 480i, 481)p, 720p, 1080i. 1080p
AUDIO
HDMI 1N 1121314 HDMI: Vide(>: 480i. 480p, 720p, 1080i, 1080p. 1080124p
Audio: Two channel linear PCM 32.44.1 and 48 kHz, 16.20 and 24 bits. Dolby Digital
AUDIO (HDMI 1N 2)
AUDIO OUT 500 mVrms (typical)
DIGITAL AUDIO OUT (OPTICAL) PCM/Dolby Digital optical signal
PC 1N D-sub 15-pin. analog RGB
PC/HDMI 2 AUDIO 1N Stereo mini jack
LAN 10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network
environment. 10BASE-T/IOOBASE-TX communication rate and communication quality are nol
guaranteed for this TV.) *I
USB/DLNA Refer to the i-Manual for supported format.
Power and others
Power requirement 110-240 V AC, 50/60 Hz (U.S.A./( auada 120 V AC, 60 Hz)
Power consumption 222 W 169 W 158 W 129 W 109 W
in use
in DAM .2 18 W
(You may hear a clicking noise during the download but this is normal.)
in standby
Screen size
(inches measured diagonally)
Less than t).17 W with 121)V AC and less than 0.23 W with 240 V AC
/ /
60 inches [ 52 inches [ 46 inches
±A_
1,921) dols (horizontal) x 1,080 lines (vertical)
Less than I).13 W
with 120 V AC _md
less than 0.2 W
with 240 V A(
40 inches
Display resolution
Speaker 34 × 11)O 1,127 × 742 x 320 34 × 160
Full range with speaker (mm)
box (2) (inches) 1 3Is x 4 1 3Is x 6 3Is
Dimensions with stand (mm) 1,440 x 927 x 3801 1,261 x 819 x 4001 1,127 x 748 x 320 994 x 673 x 290
(inches) 563/4x363/sx 15' 493/4x32 I/4x 153/4' 44 3/s x 291/4 x12 5/8 44 3Ax 291/2 x12 5/8 391/4x261/2xll I/2
without stand (mm) 1,440 x 889 x 64 ] 1,261 x 787 x 64 1,127 x 710 x 64 1,127 x 716 x 64 994 x641 x 64
(inches) 563/4x35x25/s 493/4x3 x25/s 443/sx28x25/8 443/sx281/4x25/s 391/4x251/4x25/s
wall-mount hole panern0nm) 40( x 30( 300 x 300
wall-mount screw size (ram) M6 (length: refizr to diagram on page 15.)
M ....... ith stand (kg)/(lb.) 50.6/111.5 } 36.1/79.6 ] 28.8/63.5 ] 27.8/61.3 ] 22.6/49.8
without stand (kg)/(lb.) 43.3/95.4 30.1/66.3 24.8/54.7 24.0/52.9 19.2/42.3
Supplied accessories See "Checking the accessories" (page 4).
Optional accessories Connecting cables /Support Belt Kit /Wall=Mount Bracket
>':1For LAN connections, use a Category 7 I()BASE-T/I()()BASE-TX cable (not supplied).
":2 Download Acquisition Mode (DAM) is used fi>rsoftware updates and/or collecting data lot TV Guide On Screen.
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
2O