Sony KDL-70W850B User manual

SONY.
Television
T919viseur
BRA
VIA
Operating
Instructions
(Setup
Guide)
Mode
d'emploi
(Guide
d'installation)
us
FR
Sony
Customer
Support
U.S.A.:
http://www.
sony.
com/tvsupport
Canada:
http://www.
sony.
ca/support
United States Canada
1.800.222.SONY 1.877
.899.SONY
Please Do Not Return
the Product to the Store
Service
a
Ia
clientele·
Sony
Canada:
http://support.
sony.
ca/fr
Etats-Unis :
http://www.
sony.
com/tvsupport
Canada Etats-Unis
1.877.899.SONY 1.800.222.SONY
Ne retournez pas
le
produit
au
magasin

Owner's Record
The model and serial numbers
are located at the side and rear of
the
TV.
Record these numbers
in
the spaces provided below. Refer
to them whenever you call upon
your Sony dealer regarding this
TV.
Model Name
Serial No.
CAUTION
To prevent electric shock and
blade
exposure,
do
not use this AC plug
with an extension cord, receptacle or
other outlet unless the blades can be
fully inserted.
• Operate the
TV
only on
11
0-240 V
AC (U.S.A./Canada 120 V AC)
• Some people may experience
discomfort (such as eye strain,
fatigue, or nausea) while watching
30
video images or playing
stereoscopic
30
games. Sony
recommends that all viewers take
regular breaks while watching
30
video images or playing
stereoscopic
30
games. The length
and frequency of necessary breaks
will vary from person to person. You
must
decide
what works best. If you
experience any discomfort, you
should stop watching the
30
video
images or playing stereoscopic
30
games until the discomfort ends;
consult a doctor if you believe
necessary. You should also review
(i) the instruction manual of any
other device or media used with
this television and (ii) our website
(http://www.sony.com/tvsupport)for
the latest information. The vision of
young children (especially those
under six years old)
is
still under
development. Consult your
doctor
(such as a pediatrician or eye
doctor) before allowing young
children to watch 3D video images
or play stereoscopic 3D games.
Adults should supervise young
children to ensure they follow the
recommendations I
isted above.
• Do not use, store, or leave the 3D
Glasses or battery near a fire, or in
places with a high temperature,
e.g., in direct sunlight, or
in
sun-
heated cars.
• When using the simulated
30
function, please note that the
displayed image is modified from
the original due to the conversion
done
by
this television.
Licensing Information
The terms HDMI and HDMI High-
Definition Multimedia Interface, and
the HOMI Logo are trademarks or
registered trademarks of HDMI
Licensing LLC
in
the United States
and other countries.
Fergason Patent Properties, LLC:
U.S. Patent No.
5,
717,422
U.S. Patent No. 6,816,141
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
"Biu-ray Disc", "Biu-ray" and "Biu-ray
Disc" logo are trademarks of Blu-ray
Disc Association.
"BRAVIA" and
BRAVIA,
S-Force,
Motionflow, BRA
VIA Sync, and
11
are
trademarks or registered marks of
Sony Corporation.
DLNA
®,
the DLNA Logo and DLNA
CERTIFIED® are trademarks, service
marks, or certification marks of the
Digital Living Network Alliance.
TrackiD is a trademark or registered
trademark of Sony Mobile
Communications AB.
Music and video recognition
technology and related data are
provided
by
Gracenote®. Gracenote
is the industry standard
in
music
recognition technology and related
content delivery. For more
information, please visit
www.gracenote.com.
CD, DVD, Blu-ray Disc, and music
and video-related data from
Gracenote, Inc.,
copyright©
2000-present Gracenote. Gracenote
Software,
copyright©
2000-present
Gracenote. One or more patents
owned by Gracenote apply to this
product
and service. See the
Gracenote website for a non-
exhaustive list of applicable
Gracenote patents.
Gracenote, Gracenote eyeQ,
Gracenote VideoiD, Gracenote Video
Explore, Gracenote MusiciD, the
Gracenote logo and logotype, and
the "Powered by Gracenote" logo are
either registered trademarks or
trademarks of Gracenote
in
the
United States and/or other countries.
Opera® Devices SDK from Opera
Software ASA. Copyright 1995-2014
Opera
Software ASA. All rights
reserved.
Wi-Fi, Wi-Fi Direct and Miracast are
trademarks or registered trademarks
of Wi-Fi Alliance.
"Sony Entertainment Network logo"
and "Sony Entertainment Network"
are trademarks of Sony Corporation.
MHL, Mobile High-Definition Link and
the MHL Logo are trademarks or
registered trademarks of MHL
Licensing, LLC.
For
DTS
patents, see
http://patents.dts.com. Manufactured
under license from
DTS
Licensing
Limited.
DTS,
the Symbol, &
DTS
and
the Symbol together are registered
trademarks, and
DTS
Digital
Surround is a trademark of
DTS,
Inc.
© DTS, Inc. All Rights Reserved.
Designed with
UEI
Technology™
Under License from Universal
Electronics Inc.
Portions©
UEI
2000-
2013
The Bluetooth® word mark and logos
are owned
by
the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are
those of their respective owners.
HIOH·DEFINITION TELEVISION
HIGH-DEFINITION MULTIMEDIA INTERFACE
0 gracenote.

O
OPERATM
software
~f-.MHL
..
Mobile
High-i:Jefinition
Link
~dlC
Digital
Surround
0
Bluetooth®
Your BRAVIA
TV
is
ENERGY
STAR
®
qualified
in
the
default mode.
It
meets strict energy
efficiency guidelines
set by the U.S. Environmental
Protection Agency and Department
of Energy. ENERGY
STAR
is
a joint
program of these government
agencies, designed to promote
energy efficient products and
practices.
Changes
to
certain features, settings,
and functionalities (when available) of
this
TV
(i.e. Picture/Sound, Light
Sensor, Power Savings, Picture
Scene/Mode, Auto Display, Shop
Front Display Settings) can increase
or change the power consumption.
The "Auto" and "General" picture
scenes are default settings optimized
for the input signal selected. Your
BRAVIA
TV
is
tested
in
these settings
for ENERGY
STAR
qualification.
Depending upon such changed
settings, the power consumption may
exceed the limits required for the
ENERGY
STAR
qualification
in
the
default mode.
The 70 class has a 69.5 inch
viewable image size (measured
diagonally).
Location of the
identification label
Labels for the Model No., Power
Supply rating (in accordance with
applicable safety regulation) and
Manufacturing date are located
on
the rear of the
TV
.
(b
• The illustrations of the remote
control used
in
this manual are of
the
RM-YD1
02 unless otherwise
stated.
• The illustrations used
in
this manual
may differ depending on your
TV
model.
• Retain this manual for future
reference.
3US

The BRAVIA® Full HDTV
Experience
Thank you for choosing Sony! Your new
BRA
VIA®
TV
opens the door to the "Full
HDTV Experience." This document will help
you get the most out of your
TV.
Please take a moment to register your
TV
at:
U.S.A.:
http://productregistration.sony
.com
Canada:
http://www.sony.ca/registration
Four Steps to a Full HD Experience
Set, Source, Sound, and Setup.
1
Set
Now that you have made the best selection
in
LED
backlit LCD
TV
technology, be sure
to remove all accessory contents from the
packaging before setting up your
TV.
2 Source
To
experience the stunning detail of your
BRAVIA
TV,
you need access to HD
programming.
• Upgrade your signal or content source to
high-definition (HD) by contacting your
HD service provider.
• Receive over-the-air HD broadcasts with
an
HD-quality antenna connected
directly to the
back
of your
TV.
Visit
http://www.antennaweb.org
for
more information on antenna selection
and setup.
• Discover the wealth of entertainment now
available on super-high resolution
Blu-ray DiscrM player and other Sony HD
equipment.
3
Sound
Complete the high-definition experience
with a
BRAVIA
SyncrM surround sound
system or AN receiver from Sony.
4
Setup
Install your
TV
and connect your sources.
See page 12 for sample connection
diagrams.
To
help assure the highest
quality for your HD experience, use Sony
HDMI (High-Definition Multimedia
Interface) cables.
To learn more about HDTV, visit:
U.S.A.: http://www.sony.com/HDTV
Canada: http://www.sony.ca/hdtv
This
TV
displays all video input signals
in
a resolution of 1
,920 dots x 1
,080 lines.
\
The following chart shows the high-definition (HD) and standard-definition
(SO)
video formats
supported by your
BRA
VIA
TV
inputs.
AUDIO
SUPPORTED
FORMATS
1080
/
24p
/
30p
1
080p*
1
1080i
720
/
24p
/
30p
720p*
1
INPUT VIDEO
HOM
I
HDr-----;-------.-------~--+-~--~--L--
0
@0
Ps
PR
Audio
L/R
*
1 For details of supported formats, refer to the "Specifications"
in
this manual
2 .
*
For supported
PC
formats refer to the i-Manual.

sus

About this manual (Operating Instructions)
This manual explains how to setup your
TV.
For more
information on how to use your BRAVIA
TV,
refer to the
"Electronic manual".
Explains how to setup your
TV
such as connections,
initial setup, and basic operations.
For more information,
press
the
i-MANUAL
button
Explains how to use all the features. See page 26 on
how to use the i-Manual.
ODD
DCJCJ
ODD
or::::n::J
oQ
Oo
Images and illustrations used
in
this manual may differ from
the actual screen.

Table of Contents
Gelling Bladed
Checking the accessories........................................................................8
Inserting batteries into the remote control................................................8 g
Before setting up your TV .........................................................................9
1: Attaching the Table-Top Stand ..........................................................10
2: Connecting the TV ..............................................................................12
3: Securing the TV ...................................................................................17
4: Bundling the cables ...........................................................................19
5: Connecting the TV to the Internet.......................................................19
6: Running initial setup ...........................................................................20
Watching
TV ........................................................................................... 21
Using the remote control ........................................................................22
Discovering the contents you like (Discover).........................................23
Enjoying social networking while watching
TV (Social Viewing) ............23
Selecting various contents and tools (Home Menu) ..............................24
tmoling tor lnslraeliama -
Looking for instructions in the
electronic manual (i-Manual)
~ ...e
•lailianal lnlam111a1ian
Troubleshooting......................................................................................28
How to care for your BRAVIA
TV ............................................................30
Specifications.........................................................................................
31
Installing the TV to the Wall ....................................................................33
Installing the
TV against a wall or enclosed area...................................35
Safety Information...................................................................................36

Checking the
accessories
Remote control (1 )*
Size AAA batteries (2)
Cable clamper (2)
Table-Top Stand (2)
(KDL-60W850B, KDL-60W840B only)
Fixing screws for Table-Top Stand
(M5 x 16) (4)
(KDL-60W850B, KDL-60W840B only)
Wall-Mount Attachment (M6) (2)
Wall-Mount Attachment (M5) (2)
Active 30 Glasses (battery included) (2)
IR Blaster (1)
Operating
Instructions (this manual) and
other documents
* Refer to the model name printed on the
remote control.
sus
Inserting batteries
into the remote
control
1 Remove the protection sheet.
2 Push and slide the cover to open.

• Guidelines for Remote Control
• Point your remote control directly at the
lA sensor located
on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the
lA sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Before setting up
your TV
Some TV models are packaged with a
detached Table-Top Stand so you can
mount your
TV to a wall right away. See
page 33 (Installing the
TV to the Wall) if you
want to mount the
TV to a wall. If you are not
mounting the
TV to a wall, you will need to
attach the Table-Top Stand.
You will need a
Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while
setting up your
TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number
of people; larger size
TVs require two or
more people.
• Correct hand placement while carrying
the
TV is very important for safety and to
avoid damage.
• Ensure your
TV has adequate ventilation,
see page 35.
• For best picture quality, do not expose
the screen to direct illumination or
sunlight.
• Avoid installing the
TV in a room with
reflective wall and floor materials.
• Avoid moving the
TV from a cold area to
a warm area. Sudden room temperature
changes may cause moisture
condensation. This may cause the
TV to
show
poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the
TV on.
(Continued) 9 us

• Ensure that there are no objects in front
of the
TV.
IR Sensor
1QUS
1: Attaching the
Table-Top Stand
• Recommended (edge position)
(KDL-60W850B, KDL-60W8408
only)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
(!::;;
• Do not put stress on the LCD panel or the
frame around the screen.
•
Be careful to not pi.nch your hands or the AC
power cord when you install the
TV set to the
Table-Top Stand.
• Two or more people are needed to carry out
this installation.
1 Remove the cushion of the right side CD,
and attach the Table-Top Stand to the TV
®.
2 Repeat step 1 for the left side.

3 Fix the TV to the Table-Top Stand using
the supplied screws. The arrow marks
~ indicate the location of the screw
holes used for securing the Table-Top
Stand.
Jb~--1[ ",tl L~~ux:2J
~~'
,.
,.
p
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
• Alternative (middle position)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
Middle position
1
2
To detach the Table-Top Stand from the TV,
remove the screws ~.
p
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories
on the TV.
• Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power
on the TV with the LCD panel facing
down.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes
on the rear of
the
TV.

2: Connecting the TV
p
• Use an antenna cable connector no greater
than 14
mm thick.
• When connecting the cable to the Cable/
Antenna, input finger tighten only, over
tightening the connection can damage the
TV.
• Before moving the TV, disconnect all of the
cables connected to the
TV to prevent
damaging the
TV when it is moved.
• Use
an HOM I cable connector within 12 mm
(thickness) x 21 mm (width).
•
For more information on connections, refer to
the i-Manual.
• Shown with a Set Top Box with
HDMI connection
~-=~
= ,,, "'
t
Set Top Box
Recommendation of the F type plug
Projection of the inner wire from the
connection part must
be less than 1.5 mm.
-------] 7
mm max.
1.5
mm max.
(Reference
drawing of the F type plug)
• Shown with a Set Top Box with
COMPONENT connection
q:'"" VIDE~
0~~0
R-AUDIO-L!MONOl PR PB
COMPONENT IN Cl I '• \
t t t t t
}t!-!t-.-: 1-....N .. '*" ~
Oour ~
Set Top Box

• Cable System orVHF/UHF Antenna
System
Cable or Antenna ... '
• Shown with MHL device with MHL
connection
+ y--~D+
Use authorized
MHL 2 CABLE
with MHL logo
•G= 0
MHL
device
The
TV simultaneously charges the MHL-
compatible connected device while playing
photo/music/video files. You can use the
TV
remote control to control the connected
MHL-compatible device.
p
• If Auto Input Change {MHL) is set to On, the
TV automatically switches to HOMI IN 1/MHL
from other input when MHL-compatible
1111
device is connected to HOMI IN 1/MHL jack.
The availability of Auto Input Change (MHL)
depends on whether the MHL-compatible
device can support this feature.
• If Charge MHL during Power Off
is set to
On, you can continue charging the MHL-
compatible device even when the
TV is in
standby mode.
(Continued)
13US

• Shown with HD BRA VIA® SyncTM Basic Connection
*2 0ptical Connection
*1 Under Panel l
I
[_,_,.,!~J [f k= L~ ... l~
. ~~~·". ·.
*1 AN Receiver
! *1 Rear of TV
*
1
Blu-ray Disc
; HD Cable Box or
*1Side Panel HD Satellite Receiver
-~L
1
1 iij I ·i~e-sAT (Dish)
.
~'"~~.,_Cable/Antenna
~~--~--------~~--~
*1 Signifies a BRAVIA Sync capable device.
*2 The optical connection is only needed for AN receivers that do not support ARC (Audio Return Channel).
Set the speaker settings to audio out, press HOME, then select Settings --+ Sound --+ Speakers--+ Audio
System.
Set the HOM I CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.
14US

• Shown with HD Basic Connection with Home Theater System
Under Panel *Optical Connection
,~
t t
'
Cable/Antenna
Rear of
TV t t t
'''
' I ,
,,,
I
, _____ ,
-----------,
Home Theater System
Blu-ray Oisc/OVO I
r------rj]
Side Panel
'-----------t--.;;J..P ! i: ,:,=: 1
1
.,_ Cable/SAT (Dish)
~~-~~------------~--~,
c:::::::J c:::::::J
SO Cable Box or
SO Satellite Receiver
* The optical connection is only needed for home theater system that do not support ARC (Audio Return Channel)
when connecting with HDMI.
Set the speaker settings to audio out, press HOME, then select
Settings-+ Sound -+ Speakers -+ Audio
System.
Set the HOM I CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.
(Continued)
15US

• Shown with PC Connection with SD VCRIDVD
'--
-Notebook PC
l:---~ri
·····-,:~----l
PC
' * DVI
t
Under Panel
,~
t
VCR
......
L;l Splitter VCR/DVD Combo
t
'
Cable/Antenna
~-----------~~--+
Rear of TV
;
Side Panel
* DVI does not support audio signals. Connect the audio output of the PC to the PC speakers or an AN receiver to
listen to sound from the
PC.

3: Securing the TV
Sony strongly recommends
taking measures to prevent
the
TV from toppling over.
Unsecured
TVs may topple
and result
in property
damage, serious bodily
injury or even death.
• Secure the
TV to a wall and/or stand.
• Do not allow children to play or climb
on
furniture and TV sets.
• Avoid placing or hanging items on the
TV.
• Never install the TV on:
-slippery, unstable and/or uneven
surfaces.
-furniture that can easily be used as
steps, such as a chest of drawers.
• Install the
TV where it cannot be pulled,
pushed, or knocked over.
• Route all AC power cords and
connecting cables so that they are not
accessible to curious children.
Consider the following measures when
securing your
TV to a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the
TV. Use two
angle braces (not supplied) to secure
the stand. For each angle brace use the
appropriate hardware to:
• Attach one side of the angle brace to
the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
. Use the optional hardware listed as
follows (not supplied):
• M4 machine screw (screwed into the
TV's rear cover)
• A screw or similar (attach it to the
Stand)
• Rope or chain (strong enough to
support the weight of the
TV). Make
sure that there
is no excess slack in
the rope or chain.
Screw hole
on the rear
cover
1 CD
l~~
---
Screw hole on the
'-.®
~
Screw
(not supplied)
(Continued)
17US

p
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
6-8 mm
Screw M4
.,_ __ Rope or chain
TV's rear cover
• Be sure to store the removed screws in a
safe place, keeping them away from
children.
3 Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Wall-
mount
holes
_...........__......_,__;
18US
Wall-anchor
IIEtl--- (not
.._... __ .. ,,.,,,,,, sup pI ied)
p
• Your TV is shipped with screws attached
to the rear of the
TV depending on the TV
model. (They are fastened in the screw
holes for wall mounting.)
Be sure to
remove the upper two screws prior to
anchoring the
TV to a wall.
• Securing the
TV to the stand without
securing the
TV and the stand to the wall
provides minimum protection against the
TV toppling over. For further protection,
be sure to follow the three measures
recommended.

4:Bundlingthe
cables
p
• Do not bundle the AC power cord together
with other cables.
® l .......... , .. ,.·,' ... ' ... ' ... {rr·;·
~
5: Connecting the TV
to the Internet
When you connect this TV to the Internet,
you can enjoy multiple functions. For details
on the functions, refer to the i-Manual.
p
• You will need to contract with an Internet
service provider
to connect to the Internet.
Router
Modem
• Internet
p
• For LAN connections, use a Category 7
cable (not supplied).
(Continued)
-

The built-in Wi-Fi device allows you to
access the Internet and your home network.
With this feature, you can
connect
to a
wireless network and enjoy the benefits of
networking
in
a cable-free environment.
Before setting up the Wi-Fi function of the
TV,
be sure to set up a wireless router
(access point).
TV
J
2QUS
Wireless
router
(access
point)
Modem
• Internet
6:
Running initial
setup
1
Complete your cable connections before
proceeding with the Initial
Setup.
Connect the
TV
to your AC power outlet.
2
Press
I/(!)
on the
TV.
The illumination
LED will light
up
in
white.
When you switch on the
TV
for the first
time, the Language menu appears on
the screen.
p
• The illumination LED lights up
in
different
colors according to the status of the
TV
. If
you
do
not wish to light up the
illumination LED, you can turn it off later.
Press HOME, then select
;Iii
Settings
--+
§
Preferences --+ Front Panel
Illumination --+ Illumination LED
--+
Off. You can also press OPTIONS, then
select Illumination
LED--+
Off.