Sony Trinitron KV-ES34 User manual

TrinitronColor TV
© 2000 Sony Corporation
KV-ES34
KV-ES29
3-867-756-92 (1)
Operating Instructions
K90
GB
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.

2
WARNING
• Dangerously high voltages are present inside the TV.
• Operate the TV only between 110 – 220 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.
Do not install the TV in hot, humid or excessively
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Install the TV in a stable position. Do not allow
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
Pull the power cord out by the plug. Do not pull
the power cord itself. Disconnect the TV if you
are not going to use it for several days.

3
Using Your New TV
Table of Contents
WARNING
Using Your New TV
Getting Started ............................................................................................. 4
Step 1: Connect the antenna .................................................................. 4
Step 2: Insert the batteries into the remote .......................................... 5
Step 3: Preset the channels automatically ........................................... 5
Connecting optional components ............................................................. 6
Securing the TV ............................................................................................ 9
Watching the TV ........................................................................................ 10
Advanced Operations
Selecting the picture and sound
modes .................................................. 14
Viewing higher quality pictures ...... 15
Viewing your favorite channels ....... 16
Watching two programs at the same
time ...................................................... 17
Displaying multiple programs ........ 19
Listening with surround sound ....... 21
Enjoying stereo or bilingual
programs ............................................. 22
Operating optional components ...... 23
Adjusting Your Setup (MENU)
Introducing the menu system .......... 25
Changing the “A/V CONTROL”
setting ............................................ 28
Changing the “MULTI PICTURE”
setting ............................................ 31
Changing the “FEATURE”
setting ............................................ 33
Changing the “SET UP” setting .. 35
Changing the “CH PRESET”
setting ........................................... 38
Additional Information
Self-diagnosis function...................... 41
Troubleshooting ................................. 42
Identifying parts and controls ......... 45
Specifications ...................... Back cover
The features you will enjoy include:
• “DRC-MF” for viewing higher quality
pictures (page 15)
• “FAVORITE CH” for quick and easy
program selection (page 16)
• “PIP” & “TWIN” for viewing two
programs (page 17)
• “CHANNEL INDEX“ for displaying
multiple programs (page 19)
• “PICTURE MODE”/“SOUND MODE”/
“SURROUND” for customizing your TV
(pages 14 and 21)
Your TV also offers the following features:
• Menu language options
— English/Korean (page 12)
• “CHILD LOCK” for locking out specific
channels (page 36)
• “WIDE MODE” to view 16:9 pictures
(page 34)
• “ECO MODE” to save energy
(page 34)
• “GAME MODE” for video games
(page 34)
GB

4Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Connecting a VCR
To play a video tape, press VIDEO (see page 11).
Using Your New TV
: Signal flow
F connector
(not supplied)
or Antenna cable (not supplied)
Rear of TV
To video and
audio outputs
To S video
output
Audio/Video cable
(not supplied)
S video cable
(not supplied)
: Signal flow
To S VIDEO
input
VCR
Antenna cable
To antenna
output
To ˘(antenna)
R
L
23
Y
CB
CR
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
R
VIDEO IN
MONITOR
OUT
COMPONENT VIDEO
(DVD) IN
AUDIO
VIDEO
S VIDEO
L
(MONO)
DIGITAL IN
(DOLBY DIGITAL/PCM)
1
Rear of TV
To VIDEO IN 1, 2 or 3
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
Antenna cable (not supplied)

5
Using Your New TV
Using Your New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• If you connect a VCR to the 8(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When both the S VIDEO and VIDEO IN 1 input are connected, the
S VIDEO input is automatically selected. To view the video input to
VIDEO IN 1, disconnect the S video cable.
Step 2
Insert the batteries into
the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Notes
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 40).
• To open the side panel of your TV, push on it until you hear a click, then it
will open.
b
Side panel
AUTO
PROGR
S
VIDEO
VIDEO
AUDIO
L
R
2
VIDEO 4
INPUT
AUTO
PROGR
1
g
(MONO)
STANDBY/
STEREO/
WAKE UP
MAIN POWER
MAIN POWER
1 2 3
AUTO PROGRAM
1
2
AUTO
PROGR
2
PUSH
PUSH
b
S
VIDEO
VIDEO
AUDIO
L
R
VIDEO 4
INPUT
(MONO)

6Using Your New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 11 and 23.
Connecting a camcorder/video game equipment
using the VIDEO 4 INPUT jacks
Notes
• When connecting video game equipment, display the “FEATURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 34).
• You can also connect video equipment to the VIDEO IN 1, 2, or 3 jacks at
the rear of your TV.
• When both the S VIDEO input and VIDEO 4 INPUT are connected, the
S VIDEO input is automatically selected. To view the video input to
VIDEO 4 INPUT, disconnect the S video cable.
Connecting audio/video equipment using the MONITOR OUT
output jacks
Note
• If you select “DVD” on your TV screen, no signal will be output at the
MONITOR OUT jacks (see page 11).
: Signal flow
To S video output
Side panel
Camcorder
Video game equipment
To video and
audio outputs
To S VIDEO
input
To VIDEO 4
INPUT
or
Audio/Video cable
(not supplied)
S video cable
(not supplied)
VIDEO (yellow)
AUDIO-L (MONO)
(white)
AUDIO-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
or
Audio system
To
audio
inputs
VCR
: Signal flow
To
MONITOR OUT
Antenna cable
Audio cable
(not supplied)
Audio/Video cable (not supplied)
AUTO
PROGR
2
S
VIDEO
VIDEO
AUDIO
L
R
VIDEO 4
INPUT
(MONO)
R
L
23
Y
CB
CR
R
VIDEO IN
MONITOR
OUT
COMPONENT VIDEO
(DVD) IN
AUDIO
VIDEO
S VIDEO
L
(MONO)
DIGITAL IN
(DOLBY DIGITAL/PCM)
1

7
Using Your New TV
Using Your New TV
Connect To (on the DVD player)
Y (green) Y
CB(blue) Cb, B-Y or PB
CR(red) Cr, R-Y or PR
Connecting a DVD player to COMPONENT VIDEO (DVD) IN
input
1 Using an audio cable, connect R and L under COMPONENT VIDEO (DVD) IN
input on your TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2 Using a coaxial digital connecting cord, connect DIGITAL IN under COMPONENT
VIDEO (DVD) IN input on your TV to the DIGITAL OUT, COAXIAL output
connector on your DVD player.
3 Using a component video cable, connect Y, CB, and CRunder COMPONENT VIDEO
(DVD) IN input on your TV to the COMPONENT VIDEO OUT Y, CB, and CRoutput
connectors on your DVD player.
4 Press VIDEO on the remote or the TV until “DVD” appears on the screen.
To component
video output
Component video cable
(not supplied)
DVD
player
To L (white)
R (red)
To audio
output
Audio cable (not supplied)
: Signal flow
To coaxial
digital
output
Coaxial digital
connecting
cord (not
supplied)
To DIGITAL IN
(digital input)
R
L
Y
CB
CR
COMPONENT VIDEO
(DVD) IN
DIGITAL IN
(DOLBY DIGITAL/PCM)
VIDEO COAXIAL OPTICAL
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
CBCR
DIGITAL OUT
continued
Notes
• Some DVD player terminals may be labeled differently:
• When connecting to COMPONENT VIDEO (DVD) IN input on your TV,
you must connect Y, CB, and CRto receive the video signals, and at least
connect DIGITAL IN to receive digital audio signals or connect L and R to
receive analog audio signals (see page 30).
• When making connections to DIGITAL IN under COMPONENT VIDEO
(DVD) IN input on your TV, always set “DIGITAL IN: OFF” in the “A/V
CONTROL” menu. After completing all connections, then set “DIGITAL
IN: ON”. If you set “DIGITAL IN: ON” while still making connections to
DIGITAL IN under COMPONENT VIDEO (DVD) IN input, a loud noise
may suddenly come out from the speakers, affecting your hearing and
causing damage to the speakers (see page 30).
To COMPONENT VIDEO (DVD) IN
input

8Using Your New TV
VIDEO
R-AUDIO-L
LINE OUT
23
R
VIDEO IN
AUDIO
VIDEO
S VIDEO
L
(MONO)
1
Connecting a DVD player to VIDEO IN 1, 2, or 3
Connect VIDEO IN 1, 2, or 3 AUDIO/VIDEO connectors on your TV to LINE OUT on
your DVD player.
To audio/video
output
VIDEO (yellow)
AUDIO-L (MONO)
(white)
AUDIO-R (red)
To VIDEO IN
1, 2, or 3
: Signal flow
Audio/Video cable
(not supplied)
Connecting optional components (continued)
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 29).
• Connect your DVD player directly to your TV. Connecting the DVD
player through other video equipment will cause unwanted picture noise.

9
Using Your New TV
Using Your New TV
20 mm
AB
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
AWith the supplied screws, attach the stabilizer band to the TV stand and to
the rear of the TV using the provided hole.
OR
BPass a cord or chain through the clamps and secure them to the rear of the
TV and a wall or pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
OR
3.8 mm

10 Using Your New TV
Watching the TV
This section explains various functions
and operations used while watching the
TV. Most operations can be done using
the remote.
POWER
CH +/–
or
231
564
897
0
ENTER JUMP
MUTING
MTS VIDEO
PIC
MODE
TV/VIDEO
TWIN
FREEZE SWAP PIP
TV
DISPLAY DRC-MF POWER
CHVOL
MENU
FAVORITE CH
INDEX
SURROUND WAKE UP
SOUND
MODE
VIDEO
POWER
TITLE
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
SLEEP
1
Press MAIN POWER to turn on the TV.
When the TV is in standby mode
(the STANDBY indicator on the
TV is lit red), press POWER on the
remote or STANDBY on the TV.
2To select the TV program,
press the number buttons
and then press ENTER, or
press CH +/–.
Note
• When you turn on the TV, either the program number or video mode is
displayed for approximately 40 seconds. The ECO MODE ( ) icon will also
appear if “ECO MODE” in the “FEATURE” menu is set “ON” (see page 34).
To select a TV program quickly
(1) Press and hold CH +/–.
(2) Release CH +/– when the desired program number appears.
Note
• When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
– CHANNEL +
ENTER STANDBY
MAIN POWER
TV/VIDEO
MENU – VOLUME +
Number buttons
123
456
78
0
9
ENTER
ENTER
CH
MAIN POWER
ENTER
STANDBY
indicator

11
Using Your New TV
Using Your New TV
To
Turn off temporarily
Turn off completely
Adjust the volume
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Additional tasks
MUTING
VOL +/–
continued
* Some picture/sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/sound settings
disappears after about 3 seconds.
–CHANNEL +
ENTER STANDBY
MAIN POWER
TV/VIDEO
MENU –VOLUME +
DISPLAY
POWER
VIDEO
TV
Press
POWER.
The STANDBY indicator on the TV lights up red.
MAIN POWER on the TV.
VOL +/–.
MUTING.
VIDEO (or TV/VIDEO on the TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3”, “VIDEO 4”or “DVD”.
To return to the TV screen, press TV (or TV/VIDEO on the TV).
JUMP.
DISPLAY.
231
564
897
0
ENTER JUMP
MUTING
MTS VIDEO
PIC
MODE
TV/VIDEO
TWIN
FREEZE SWAP PIP
TV
DISPLAY DRC-MF POWER
CHVOL
MENU
FAVORITE CH
INDEX
SURROUND WAKE UP
SOUND
MODE
VIDEO
POWER
TITLE
TV
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
SLEEP
JUMP
MENU
V/v/
SLEEP
WAKE UP
STANDBY
indicator

12 Using Your New TV
Changing the menu language
You can change the menu language as well as the on-screen language. For details on
how to use the menu, see “Introducing the menu system” on page 25.
1Press MENU.
2Press Vor vto select ,
then press .
3Make sure “LANGUAGE” is
selected then press .
4Press Vor vto select the
desired language
(e.g., “ ”), then
press .
The selected menu
language appears.
To return to the normal screen
Press MENU.
Watching the TV (continued)
bb
SET UP
:ENGL I SH
CHILD LOCK:CH 0 0 1 +
+
OFF
PIC ROTATION
FAVOR I TE CH
LANGUAGE
b
MENU
b
bb
A/V CONTROL
DRC-MF: DRC1050
SURROUND: OFF
DIGITAL IN : OFF
PICTURE MODE: DYNAMIC
SOUND MODE: DYNAMIC
SET UP
:ENGL I SH
CH I L D LOCK
PIC ROTATI
FAVOR I TE C
LANGUAGE/
설정 한국어
채널차단 켜짐
선호채널
언어선택
CH001
화면 기울기 조정

13
Using Your New TV
Using Your New TV
Setting the Wake Up timer
1Press WAKE UP until the
desired period of time
appears.
The Wake Up timer starts
immediately after you
have set it.
2Select the TV channel or video mode you want to wake up to.
3Press POWER, or set the Sleep timer if you want the TV to turn off
automatically.
The WAKE UP indicator on the TV lights up orange.
To cancel the Wake Up timer
Press WAKE UP until “WAKE UP TIMER: OFF” appears, or turn off
the TV’s main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
Setting the Sleep timer
Press SLEEP until the
desired period of time
appears.
The Sleep timer starts
immediately after you
have set it.
To cancel the Sleep timer
Press SLEEP until “SLEEP TIMER: OFF” appears, or turn the TV off.
WAKE UP TIMER:10M
WAKE UP TIMER:OFF WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer After 12 hours
WAKE UP
SLEEP TIMER:30M SLEEP TIMER:60M
SLEEP TIMER:OFF SLEEP TIMER:90M
After 30 minutes
No Sleep Timer
After 60 minutes
After 90 minutes
SLEEP

14 Advanced Operations
Advanced Operations
Selecting the picture mode
Press PIC MODE
repeatedly until the
desired picture mode is
selected.
Select
“DYNAMIC”
“STANDARD”
“HI-FINE”
“PERSONAL”
To
receive high contrast pictures.
receive normal pictures.
receive higher resolution pictures with mild contrast.
receive the last adjusted picture setting from the “ADJUST” option in the
“A/V CONTROL” menu (see page 29).
Selecting the sound mode
Press SOUND MODE
repeatedly until the
desired sound mode is
selected.
Select
“DYNAMIC”
“DRAMA”
“SOFT”
“PERSONAL”
To
listen to dynamic and clear sound that emphasizes both the low and high
tones.
listen to sound that emphasizes voice and high tones.
receive soft sound.
receive the last adjusted sound setting from the “ADJUST” option in the
“A/V CONTROL” menu (see page 29).
Tip
• You can also set the picture and sound modes using the menu (see
“Changing the “A/V CONTROL” setting” on page 28).
Selecting the picture
and sound modes
You can select picture and sound modes
and adjust the setting to your preference
in the “PERSONAL” option.
PIC MODE
SOUND MODE
CHVOL
SURROUND WAKE UP
SOUND
MODE
MUTING
MTS VIDEO
PIC
MODE TV
DISPLAY DRC-MF POWER
SLEEP
PERSONAL
DYNAMIC
HI-FINE
STANDARD
PIC
MODE
≥DYNAMIC
≥PERSONAL ≥SOFT
≥DRAMA
SOUND
MODE

15
Advanced Operations
Viewing higher
quality pictures
— “DRC-MF”
The Digital Reality Creation-Multi
Function (DRC-MF) feature allows you
to enjoy higher quality pictures on your
TV. You can select “DRC1050” to watch
super real (higher resolution) pictures,
or “DRC PROGRESSIVE” to reduce any
jittering on the screen if necessary.
Press DRC-MF repeatedly
until you receive the
desired picture quality.
Tip
• When the broadcast signal is weak, you may see some dots or noise on the
TV screen. To reduce this interference, display the “A/V CONTROL”
menu and select “ADJUST” in “PICTURE MODE”, then adjust “SHARP”
to reduce the sharpness (see page 29).
Note
• The DRC-MF mode is not selectable when using the “CHANNEL INDEX”
or “FAVORITE CH” feature, or when the “GAME MODE”, Picture-In-
Picture (“PIP”), or “TWIN” mode is turned “ON”.
The DRC-MF logo ( ) and “DRC-MF” are trademarks of
Sony Corporation.
Select
“DRC1050”
“DRC PROGRESSIVE”
To
select higher resolution pictures.
reduce jitter of any small areas or scanning lines (e.g., letters or
the edge of objects) on the screen.
DRC-MF
Advanced Operations
231
564
897
0
ENTER JUMP
MUTING
MTS VIDEO
PIC
MODE
TV/VIDEO
TWIN
FREEZE SWAP PIP
TV
DISPLAY DRC-MF POWER
CHVOL
MENU
FAVORITE
CH
INDEX
SURROUND WAKE UP
SOUND
MODE
SLEEP
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
DRC-MF: DRC1050 DRC-MF: DRC PROGRESSIVE
DRC-MF

16 Advanced Operations
Viewing your
favorite channels
— “FAVORITE CH”
You can display seven favorite channels
for quick and easy selection.
The last seven channels selected with
the number buttons are displayed in
“AUTO” mode. You can set up your
own favorite channels in “MANUAL”
mode under the “FAVORITE CH” menu
(see “Changing the favorite channel
setting” on page 37).
Selecting a favorite channel
1Press FAVORITE.
2Press either V, b, v, or
Bto select the desired
channel (e.g. CH 8),
then press .
3Press again.
Note
• When you use your TV for the first time, seven preset channels appear.
FAVORITE
FAVORITE CH
7.PR 12 6.PR 10 5.PR 08 4.PR 06
3.PR 04
2.PR 03
1.PR 01
8
1
3
4
12 10 8 6
FAVORITE CH
0
ENTER JUMP
TV/VIDEO
TWIN
FREEZE SWAP PIP
CHVOL
MENU
FAVORITE
CH
INDEX
SURROUND WAKE UP
SOUND
MODE
VIDEO
POWER
TITLE
TV
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
SLEEP
b
1
3
4
12 10 8 6
b
FAVORITE CH
FAVORITE
bb
V/b/v/B/

17
Advanced Operations
Watching two
programs at the
same time
— “PIP”, “TWIN”
With the Picture-in-Picture (PIP) or
TWIN pictures features, you can display
a different TV program or video within
or beside the main picture.
Displaying the PIP screen
Press PIP.
Displaying TWIN pictures
Press TWIN.
To return to the normal screen
Press PIP (when in the PIP screen) or TWIN (when in the TWIN
picture screen).
Tips
• You can also display the PIP screen or TWIN pictures using the menu (see
“Changing the MULTI PICTURE setting” on page 31).
• You can change the position of the PIP screen (see “Changing the MULTI
PICTURE setting” on the page 31).
continued
231
564
897
0
ENTER JUMP
MUTING
MTS VIDEO
PIC
MODE
TV/VIDEO
TWIN
FREEZE SWAP PIP
TV
DISPLAY DRC-MF POWER
MENU
FAVORITE
CH
INDEX
SURROUND WAKE UP
SOUND
MODE
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
SLEEP
12
PIP
10 12
TWIN
PIP
SWAP
FREEZE
TV/VIDEO
V/b/v/B
TWIN

18 Advanced Operations
Additional PIP/TWIN pictures tasks
To
change a TV program in the PIP
screen or in the right TWIN picture
swap pictures between the main
and PIP screens
freeze the PIP screen
swap the right and left pictures of
the TWIN pictures
change the screen size of the TWIN
pictures
Notes
• The FREEZE button does not function in the TWIN pictures mode.
• When you display a video input on the PIP screen at a faster/slower
speed, the picture may be disrupted depending on the VCR type.
• In the TWIN picture screen, you can only operate and hear the sound of
the main left screen ( appears on the screen).
• When the TWIN button is pressed, the TV screen flickers or goes blank for
about one second before the TWIN pictures appear. This does not indicate
a malfunction of the TV.
Press
Vor v. For a video input, press TV/VIDEO.
SWAP.
FREEZE.
To unfreeze the screen, press the button again.
SWAP.
B(ZOOM IN LEFT) to increase the left screen size.
b(ZOOM IN RIGHT) to increase the right screen size.
Watching two programs at the same time (continued)
ZOOM
IN
LEFT
ZOOM
IN
RIGHT

19
Advanced Operations
Displaying
multiple
programs
— “CHANNEL INDEX”
The CHANNEL INDEX feature displays
all of the preset TV programs on twelve
or seven sub screens for direct selection.
Press CH INDEX.
The first twelve preset
programs appear one by
one, clockwise from the
upper left corner.
When the number of the
preset TV programs is less
than eight, the first seven
preset programs appear
one by one, clockwise from
the upper right corner.
Tip
• When you press the CH INDEX button in the TWIN pictures mode, the
left picture appears as the main screen of the CHANNEL INDEX mode.
CH INDEX
b
CH +/–
Main screen
Main screen
Sub screens
Sub
screens
16
1234
12 5
11 6
10987
16 1
2
3
7654
231
564
897
0
ENTER JUMP
TV/VIDEO
TWIN
FREEZE SWAP PIP
CHVOL
MENU
FAVORITE
CH
INDEX
SURROUND WAKE UP
SOUND
MODE
VIDEO
POWER
TITLE
TV
PIP CH
ZOOM
IN
LEFT
ZOOM
IN
RIGHT
PIP CH
SLEEP
continued
CH
INDEX
V/b/v/B/

20 Advanced Operations
Displaying multiple programs (continued)
To view the next or the previous twelve preset programs
This works only when the number of the preset TV programs is
more than twelve.
Press CH +/– on the remote or CHANNEL +/– the TV.
To select the desired program directly from the sub screens
1 Press either V, b, v,
or Bto move the
frame to the screen
of the program you
want to watch.
2 Press .
3 Press again.
Tip
• Pressing the number buttons directly displays the program.
To return to the normal screen
Press CH INDEX again, or:
1 Select “CHANNEL INDEX” from the “MULTI PICTURE” menu.
2 Press .
Tip
• You can also display multiple programs using the menu (see “Changing
the MULTI PICTURE setting” on page 31).
Note
• When displaying multiple programs, only the sound of the main screen is
heard.
16
1234
12 5
11 6
10987
16
13 14 15 16
17
18
16
1234
12 5
11 6
10987
b
8
1234
12 5
11 6
10987
b
8
b