Sony HVR-M15J User manual

SERVICE MANUAL
Sony EMCS Co.
Link
SERVICE NOTE
DISASSEMBLY
MODEL INFORMATION TABLE
SPECIFICATIONS
SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAM
BLOCK DIAGRAMS
ADJUSTMENT
INSTRUCTION MANUAL
REPAIR PARTS LIST
PRINTED WIRING BOARDS
Link
Revision History
Revision History
How to use
Acrobat Reader
How to use
Acrobat Reader
HVR-M15J/M15U/M15N/M15E/M15P/M15C
Ver 1.2 2006.12
DIGITAL HD VIDEOCASSETTE RECORDER
R MECHANISM (MDX-R201)
The components identified by
mark 0or dotted line with
mark 0are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
US Model
Canadian Model
AEP Model
E Model
Chinese Model
Japanese Model
HVR-M15J/M15U/M15N/M15E/
M15P/M15C
RMT-DS5
2006L0500-1
© 2006.12
Published by KohdaTEC
9-852-127-11

— 2 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
ENGLISH JAPANESE
ENGLISH JAPANESE
SPECIFICATIONS
These specifications are extracted from instruction manual of
HVR-M15U/M15N/M15E/M15P.
System
Video/Audio recording/playing Head System
Rotating dual-head helical scan
Audio recording format (HDV)
MPEG-1 Audio Layer2
16-bit 48 kHz (stereo)
Transfer rate 384 kbps
Audio recording format (DVCAM (DV))
12-bit Fs32K (Channel 1/2,
Channel 3/4)
16-bit Fs48K (Channel 1/2)
Video signal 1080/60i, NTSC color,
EIA standard system
1080/50i, PAL color,
CCIR standard system
Usable cassettes Standard DVCAM cassettes with
mark
Mini DVCAM cassettes with
mark
Tape speed (HDV)
Approx. 18.812 mm/s
Tape speed (DVCAM)
Approx. 28.218 mm/s
Tape speed (DV) Approx. 18.812 mm/s
Recording/playback time (HDV)
Approx. 276 min
(using PHDV-276DM)
Approx. 63 min
(using PHDVM-63DM)
Recording/playback time (DVCAM)
Approx. 184 min
(using PHDV-276DM)
Approx. 41 min
(using PHDVM-63DM)
Recording/playback time (DV SP)
Approx. 276 min
(using PHDV-276DM)
Approx. 63 min
(using PHDVM-63DM)
AUDIO jacks
IN Pin jack: –10 dBu
Impedance: Minimum 10 kΩ
(kilo ohms), unbalanced
Maximum input level:
+16 dBu (approx. 5 Vrms)
60i system
+14 dBu (approx. 4 Vrms)
50i system
OUT Pin jack
Impedance: Maximum 1 kΩ
(kilo ohms)
Output level: 47 kΩ
(kilo ohms) loading, unbalanced
–10 dBu (= full bit –20 dB)
60i system
–10 dBu (= full bit –18 dB)
50i system
VIDEO jacks
IN/OUT Pin jack, unbalanced
1.0 Vp-p
(75 Ω(ohms), sync negative)
Sync signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
Burst signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
S VIDEO jacks
IN/OUT Mini DIN 4-pin, unbalanced
Luminance signal:
1.0 Vp-p
(75 Ω(ohms), sync negative)
Sync signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
Chrominance signal:
0.286 Vp-p (60i/NTSC)
(burst, 75 Ω(ohms))
0.3 Vp-p (50i/PAL)
(burst, 75 Ω(ohms))
General
Peak inrush current
Hot switching inrush current,
measured in accordance with
European standard
EN55103-1 : 5.0 A (230 V)
Power requirements
8.4 V (DC IN jack)
Power consumption
8 W (during playback)
Operating temperature
5 ˚C to 40 ˚C (41 ˚F to 104 ˚F)
Storage temperature
–20 ˚C to +60 ˚C
(–4 ˚F to +140 ˚F)
Dimensions Approx. 180 ×72.8 ×267.1 mm
(7
1
/ 8 ×2
7
/ 8 ×10
5
/ 8 inches)
(w/h/d, including projecting parts
and controls)
COMPONENT OUT jacks
OUT Pin jack
Output at 480i NTSC
With [BETACAM] selected in [IN/OUT REC]
menu
Y: 1.0 Vp-p
(with 0.286 Vp-p sync negative,
output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
(75% color bars with 7.5 IRE
setup)
With [SMPTE] selected in [IN/OUT REC] menu
Y: 1.0 Vp-p
(with 0.3 Vp-p sync negative,
output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
(100% color bars with no setup)
Output with other settings
Y: 1.0 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
(100% color bars with no setup)
480i/480p:
Y: with 0.3 Vp-p sync negative
1080i:
Y/Pb/Pr: with 0.6 Vp-p 3-level
sync
HDV/DV jack i.LINK (IEEE1394,
4-pin connector S100)
Remote control
LANC Stereo mini-minijack (ø 2.5)
CONTROL S IN Stereo minijack (ø 3.5)
184 (7 1/4)
261 (10 3/8)
180 (7 1/8)
69 (2 3/4)3.8 (5/32)
151 (6)
6.1 (1/4)
Unit: mm (inches)
Mass Approx. 2.3 kg (5 lb. 1
1
/ 8 oz.)
Supplied accessories
Remote Commander (1)
AC adaptor (1)
Power cord (1)
Rack (1)
Size AA batteries (2)
Cleaning cassette (1)
Operating
See page 5-27.
instructions (1)
AC adaptor
Power requirements
100 – 240 V AC, 50/60 Hz
Current consumption
0.35 – 0.18 A
Power consumption
18 W
Output voltage
DC OUT: 8.4 V *
Operating temperature
0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
Storage temperature
–20 ˚C to +60 ˚C (–4 ˚F to +140 ˚F)
*See the label on the AC adaptor for other
specifications.
Design and specifications are subject to change
without notice.

— 3 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
ENGLISH JAPANESE
ENGLISH JAPANESE
概略仕様
システム
ヘッドシステム（映像／音声、記録／再生）
回転2ヘッドヘリカルスキャン
録音方式（HDV）MPEG-1AudioLayer2
16ビット48kHz（ステレオ）
転送レート 384kbps
録音方式（DVCAM（DV））
12ビットFs32K
（チャンネル1/2、チャンネル3/4）
16ビットFs48K（チャンネル1/2）
映像信号 1080/60i方式、NTSCカラー、EIA標準方式
1080/50i方式、PALカラー、CCIR標準方式
使用可能カセット マークのついた標準DVCAMカセット
マークのついたミニDVCAMカセット
テープ速度（HDV）
約18.812mm/秒
テープ速度（DVCAM）
約28.218mm/秒
テープ速度（DV）約18.812mm/秒
録画・再生時間（HDV）
276分（PHDV-276DM使用時）
63分（PHDVM-63DM使用時）
録画・再生時間（DVCAM）
184分（PHDV-276DM使用時）
41分（PHDVM-63DM使用時）
録画・再生時間（DVSP）
276分（PHDV-276DM使用時）
63分（PHDVM-63DM使用時）
AUDIO端子
IN ピンジャック:−10dBu
インピーダンス：10kΩ以上、不平衡
最大入力レベル：
60i時:＋16dBu（約5Vrms）
50i時:＋14dBu（約4Vrms）
OUT ピンジャック
インピーダンス：1kΩ以下
出力レベル：（47kΩ負荷時、不平衡）
60i時:−10dBu（＝フルビット−20dB）
50i時:−10dBu（＝フルビット−18dB）
184
261
180
69
3.8
151
6.1
単位：
mm
VIDEO端子
IN/OUT ピンジャック、不平衡、
ビデオ信号 1.0Vp-p、75Ω、負同期
同期信号 0.286Vp-p(60i/NTSC)
0.3Vp-p(50i/PAL)
バースト 0.286Vp-p(60i/NTSC)
0.3Vp-p(50i/PAL)
S VIDEO端子
IN/OUT 4ピンミニDIN、不平衡
ビデオ信号 Y:1.0Vp-p、75Ω、負同期
C:0.286Vp-p、バースト、75Ω(60i/NTSC)
0.3Vp-p、バースト、75Ω(50i/PAL)
同期信号 0.286Vp-p(60i/NTSC)
0.3Vp-p(50i/PAL)
COMPONENT OUT端子
OUT ピンジャック
480iNTSC出力時
[IN/OUTREC]メニューにて[BETACAM]選択時
Y:1.0Vp-p
(0.286Vp-p負同期付き、75Ω、不平衡）
Pb/Cb/B-Y、Pr/Cr/R-Y:0.7Vp-p
（75Ω、不平衡）
（7.5IREセットアップ付き75％カラーバー時）
[IN/OUTREC]メニューにて[SMPTE]選択時
Y:1.0Vp-p
(0.3Vp-p負同期付き、75Ω、不平衡)
Pb/Cb/B-Y、Pr/Cr/R-Y:0.7Vp-p
(75Ω、不平衡)
（セットアップなし100%カラーバー時）
その他の出力の場合
Y:1.0Vp-p
(75Ω、不平衡)
Pb/Cb/B-Y、Pr/Cr/R-Y:0.7Vp-p
(75Ω、不平衡)
（セットアップなし100%カラーバー時）
480i/480pはYに0.3Vp-p負同期付き
1080iはY/Pb/Prに0.6Vp-pの3値同期付き
HDV/DV端子
i.LINK（IEEE1394、4ピンコネクターS100）
リモートコントロール端子
LANC ステレオミニミニジャック（ø2.5）
CONTROLSIN ステレオミニジャック（ø3.5）
電源部・その他
電源電圧 8.4V（DCIN端子）
消費電力 8W（再生時）
動作温度 5℃〜40℃
保存温度 −20℃〜＋60℃
外形寸法 180×72.8×267.1mm
（最大突起含む）（幅／高さ／奥行き）
本体質量 約2.3kg
付属品 リモコン（1）
ACアダプター（1）
電源ケーブル（1）
スタンド（1）
単3形乾電池（2）
クリーニングカセット（1）
取扱説明書（1）
保証書（1）
ソニー業務用製品ご相談窓口のご案内（1）
AC アダプター 
電源 AC100〜240V、50/60Hz
消費電流 0.35〜0.18A
消費電力 18W
定格出力 DC8.4V*
動作温度 0℃〜40℃
保存温度 −20℃〜＋60℃
*その他の仕様についてはACアダプターのラベルをご覧ください。
本機の仕様および外観は、改良のため予告なく変更することがあり
ますが、ご了承ください。

— 4 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
Model information table
•Abbreviation
AR : Argentine model
AUS:Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
EE : East European model
HK : Hong Kong model
J:Japanese model
JE : Tourist model
KR : Korea model
NE : North European model
Model HVR-M15J HVR-M15U HVR-M15N HVR-M15E HVR-M15P HVR-M15C
Destination J US, CND E AEP E CH

— 5 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
ENGLISH JAPANESE
ENGLISH JAPANESE
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINE WITH
MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
•Keep the temperature of the soldering iron around 270˚C
during repairing.
•Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
•Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
•Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

— 6 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
ENGLISH JAPANESE
ENGLISH JAPANESE
1. 注意事項をお守りください。
サービスのとき特に注意を要する個所については，
キャビネット，シャーシ，部品などにラベルや捺印で
注意事項を表示しています。これらの注意書き及び取
扱説明書等の注意事項を必ずお守り下さい。
2. 指定部品のご使用を
セットの部品は難燃性や耐電圧など安全上の特性を
持ったものとなっています。従って交換部品は，使用
されていたものと同じ特性の部品を使用して下さい。
特に回路図，部品表に0印で指定されている安全上重要
な部品は必ず指定のものをご使用下さい。
3. 部品の取付けや配線の引きまわしはもとどおりに
安全上，チューブやテープなどの絶縁材料を使用した
り，プリント基板から浮かして取付けた部品がありま
す。また内部配線は引きまわしやクランパによって発
熱部品や高圧部品に接近しないよう配慮されています
ので，これらは必ずもとどおりにして下さい。
4. サービス後は安全点検を
サービスのために取外したネジ，部品，配線がもとど
おりになっているか，またサービスした個所の周辺を
劣化させてしまったところがないかなどを点検し，安
全性が確保されていることを確認して下さい。
5. チップ部品交換時の注意
•取外した部品は再使用しないで下さい。
•タンタルコンデンサのマイナス側は熱に弱いため交
換時は注意して下さい。
サービス，点検時には次のことにご注意下さい。
注意
電池の交換は，正しく行わないと破裂する恐れがあり
ます。電池を交換する場合には必ず同じ型名の電池
又は同等品と交換してください。
6. フレキシブルプリント基板の取扱いについて
•コテ先温度を270℃前後にして行なって下さい。
•同一パターンに何度もコテ先を当てないで下さい。
（３回以内）
•パターンに力が加わらないよう注意して下さい。
7. 無鉛半田について
無鉛半田を使用している基板には，無鉛（LeadFree）を
意味するレッドフリーマークがプリントされています。
（注意：基板サイズによっては，無鉛半田を使用して
いてもレッドフリーマークがプリントされて
いないものがあります）
：レッドフリーマーク
無鉛半田には，以下の特性があります。
•融点が従来の半田よりも約40℃高い。
従来の半田こてをそのまま使用することは可能です
が，少し長めにこてを当てる必要があります。
温度調節機能のついた半田こてを使用する場合，約
350℃に設定して下さい。
注意： 半田こてを長く当てすぎると，基板のパター
ン（銅箔）がはがれてしまうことがあります
ので，注意して下さい。
•粘性が強い
従来の半田よりも粘性が強いため，IC端子などが半田
ブリッジしないように注意して下さい。
•従来の半田と混ぜて使用可能
無鉛半田には無鉛半田を追加するのが最適ですが，
従来の半田を追加しても構いません。

— 7 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
TABLE OF CONTENTS
1. SERVICE NOTE
1- 1. Self-diagnosis Function ···················································1-1
2. DISASSEMBLY
2-1. Disassembly·····································································2-2
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram (1/6) ··········································· 3-1
3-2. Overall Block Diagram (2/6) ··········································· 3-2
3-3. Overall Block Diagram (3/6) ··········································· 3-3
3-4. Overall Block Diagram (4/6) ··········································· 3-4
3-5. Overall Block Diagram (5/6) ··········································· 3-5
3-6. Overall Block Diagram (6/6) ··········································· 3-6
3-7. Power Block Diagram (1/3)·············································3-7
3-8. Power Block Diagram (2/3)·············································3-8
3-9. Power Block Diagram (3/3)·············································3-9
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. Frame Schematic Diagram ··············································4-1
4-2. Schematic Diagrams ························································4-3
4-3. Printed Wiring Boards ··················································· 4-27
4-4. Mounted Parts Location ················································4-37
5. REPAIR PARTS LIST
5-1. Exploded Views ······························································· 5-2
5-2. Electrical Parts List ························································· 5-9
Section Title Page
6. ADJUSTMENTS
Before Starting Adjustments ·····················································6-1
1-1. Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-2
1-2. List of Service Tools ························································6-3
1-3. Information (Mechanical Section)···································6-5
6-1. Mechanical Section Adjustments ····································6-6
6-1-1.Parts Replacement and Preparation for Adjustment ········6-6
6-1-2.Periodic Check ································································6-8
6-1-3.Parts Replacement ···························································6-9
6-1-4. Check and Adjustment ··················································6-23
6-2. Video Section Adjustments ···········································6-32
2-1. Preparations before Adjustments ···································6-32
2-2. Initialization of 8, 9, A, B, C, D, 13, 18, 1A, 1B, 1C,
1D Page Data ·································································6-35
2-3. System Control System Adjustments ····························6-41
2-4. Servo and RF System Adjustments ······························· 6-43
2-5. Video System Adjustments ············································ 6-46
2-6. Audio System Adjustments ··········································· 6-56
6-3. Service Mode·································································6-60
3-1. Adjustment Remote Commander (RM-95) ···················6-60
3-2. Adjustment Remote Commander (New LANC Jig) ·····6-61
3-3. Data Process ·································································· 6-62
3-4. Service Mode·································································6-63
Section Title Page

1-1
ENGLISH JAPANESE
ENGLISH JAPANESE
HVR-M15J/M15U/M15N/M15E/M15P/M15C
1. SERVICE NOTE
1-2-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the monitor screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-2-2. Self-diagnosis Display
When problems occur while the unit is operating, the time code of
the monitor screen shows a 4-digit display consisting of an alphabet
and numbers, which blinks at 3.2 Hz. This 5-character display
indicates the “repaired by:”, “block” in which the problem occurred,
and “detailed code” of the problem.
1 1
3 1C
Repaired by:
Refer to
“1-2-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
monitor screen
C : 3 1 : 1 1
1-2. SELF-DIAGNOSIS FUNCTION
1-1. PRECAUTION ON REPLACING THE VD-036 BOARD
Set S4602 of the VD-036 board to the following position.
Switch setting
S4602 ...................................... 60i (HVR-M15J/M15U/M15N)/50i (HVR-M15E/M15P/M15C)
S4602
60i t50i
VD-036 BOARD (SIDE B)

1-2
ENGLISH JAPANESE
ENGLISH JAPANESE
HVR-M15J/M15U/M15N/M15E/M15P/M15C
1-2-3. Self-diagnosis Code Table
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Block
Function
21
22
31
31
31
31
31
31
31
31
31
31
31
31
31
32
32
32
32
32
32
32
32
32
32
32
32
32
Detailed
Code
00
00
10
11
20
21
22
23
30
31
40
41
42
43
44
10
11
20
21
22
23
30
31
40
41
42
43
44
Symptom/State
Condensation.
Video head is dirty.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading .
S reel side tape slacking when unloading .
T reel fault.
S reel fault.
FG fault when starting capstan.
FG fault during normal capstan operations.
FG fault when starting drum.
PG fault when starting drum.
FG fault during normal drum operations.
PG fault during normal drum operations.
Phase fault during normal drum operations.
LOAD direction loading motor time-
out.
UNLOAD direction loading motor
time-out.
T reel side tape slacking when
unloading.
S reel side tape slacking when
unloading.
T reel fault.
S reel fault.
FG fault when starting capstan.
FG fault during normal capstan
operations.
FG fault when starting drum.
PG fault when starting drum.
FG fault during normal drum
operations.
PG fault during normal drum
operations.
Phase fault during normal drum
operations.
Self-diagnosis Code
Repaired by:
Correction
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.
Remove the power cable, connect, and perform operations from
the beginning.

1-3
ENGLISH JAPANESE
ENGLISH JAPANESE
HVR-M15J/M15U/M15N/M15E/M15P/M15C
1. SERVICE NOTE
VD-036基板のS4602は，次のように設定してください。
スイッチ設定
S4602 ...................................... 60i（HVR-M15J/M15U/M15N）/50i（HVR-M15E/M15P/M15C）
1-1. VD-036基板交換時の注意
1-2-1. 自己診断機能について
本機の動作に不具合が生じたとき，自己診断機能が働き，
モニタ表示に，どう処置したらよいか判断できる表示を行
います。自己診断機能については取扱説明書にも掲載され
ています。
1-2. 自己診断機能
1-2-2. 自己診断表示
本機の動作に不具合が生じたとき，モニタ表示のタイムコー
ド表示部分がアルファベットと数字の4桁表示になり，3.2Hz
で点滅します。この5 文字の表示によって対応者分類および
不具合の生じたブロックの分類，不具合の詳細コードを示し
ます。
1 1
3 1C
対応者分類
「1-2-3.自己診断コード表」
を参照
対応方法の違いにより分類
例 31･･･テープを入れ直す
32･･･電源を入れ直す
ブロック分類 詳細コード
3.2Hz点滅
C：お客さま自身で対応
H：販売店で対応
E：サービスエンジニア
 で対応
モニタ表示
C : 3 1 : 1 1
S4602
60i t50i
VD-036BOARD(SIDEB)

1-4E
ENGLISH JAPANESE
ENGLISH JAPANESE
HVR-M15J/M15U/M15N/M15E/M15P/M15C
1-2-3. 自己診断コード表
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
ブロック
機能
21
22
31
31
31
31
31
31
31
31
31
31
31
31
31
32
32
32
32
32
32
32
32
32
32
32
32
32
詳細
コード
00
00
10
11
20
21
22
23
30
31
40
41
42
43
44
10
11
20
21
22
23
30
31
40
41
42
43
44
症状／状態
結露している
ビデオヘッドが汚れている
LOAD方向，ローディング所定時間
内終了せず
UNLOAD方向，ローディング所定
時間内終了せず
UNLOAD時，Tリール側テープ弛み
UNLOAD時，Sリール側テープ弛み
Tリール異常
Sリール異常
キャプスタン起動時FG異常
キャプスタン定常時FG異常
ドラム起動時FG異常
ドラム起動時PG異常
ドラム定常時FG異常
ドラム定常時PG異常
ドラム定常時位相異常
LOAD方向，ローディング所定時間
内終了せず
UNLOAD方向，ローディング所定
時間内終了せず
UNLOAD時，Tリール側テープ弛み
UNLOAD時，Sリール側テープ弛み
Tリール異常
Sリール異常
キャプスタン起動時FG異常
キャプスタン定常時FG異常
ドラム起動時FG異常
ドラム起動時PG異常
ドラム定常時FG異常
ドラム定常時PG異常
ドラム定常時位相異常
自己診断コード
対応／方法
カセットを取り出して，約１時間してからもう一度入れ直す
別売のクリーニングカセットできれいにする
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
テープを入れ直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
電源ケーブルを外して付け直し，再度操作し直す
対
応
者

2-1
2. DISASSEMBLY
HVR-M15J/M15U/M15N/M15E/M15P/M15C
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
•When remove a connector, dont’ pull at wire of connector. It is possible that a wire is snapped.
•When installing a connector, dont’ press down at wire of connector.
It is possible that a wire is snapped.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)

2-2
HVR-M15J/M15U/M15N/M15E/M15P/M15C
2-1. DISASSEMBLY
2-1-1. OVERALL ASSEMBLY
HELP
HELP
EXPLODED VIEW
HARDWARE LIST
Follow the disassembly in the numerical order given.
1Upper Case (1-1 to 1-3)
2Bottom Case (2-1 to 2-3)
3FR-255 Board (3-1 to 3-8)
2Bottom Case
1Upper Case
2-1 (#41) 2-2
(#41)
1-3
(Slide the upper case in the
direction of the arrow)
2-3
(Slide the bottom case in the
direction of the arrow)
3-2 (Claw)
3-4
3-5
3-3 (Claw)
3-8 (Claw)
3-7 (Claw)
3-1 (#39)
1-1 (#41)
1-2 (#41)
3-6 (#39)
3FR-255 Board
Switches
Note: When installing front panel, connect
switches with slide knobs.
Knobs

2-3
HVR-M15J/M15U/M15N/M15E/M15P/M15C
2-1-2. CHASSIS BLOCK
EXPLODED VIEW
HARDWARE LIST
Follow the disassembly in the numerical order given.
1MD Block (1-1 to 1-12)
2JU-002 Board (2-1 to 2-7)
3JL-002 Board (3-1 to 3-5)
2JU-002
Board
1MD Block
2-1 (#39)
2-5 (#39)
2-2 2-4
2-6
2-3
(#39)
3JL-002
Board
1-1 (#39)
1-11 (#31)
1-12 (#31)
3-3 (#32)
3-1 (#34)
3-2
3-5
1-2
1-3
1-4
1-5
1-6
1-7
2-7 (#34)
1-8
1-9
1-10

2-4E
HVR-M15J/M15U/M15N/M15E/M15P/M15C
2-1-3. MD BLOCK
EXPLODED VIEW
HARDWARE LIST
Follow the disassembly in the numerical order given.
1VD-036 Board (1-1 to 1-5)
2Mechanism Deck (2-1 to 2-16)
VD-036
RP-243
1VD-036 Board
1-5 (#32)
2Mechanism Deck
2-1
2-2
2-3
2-6
2-5
(#32)
2-10 (#32)
2-7 (#32)
1-2
1-3
1-4
1-1
2-4
2-8
2-9
2-11
2-12 (#32)
2-13
2-14 (#32)
2-15
2-16

HVR-M15J/M15U/M15N/M15E/M15P/M15C
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (5/6)
OVERALL BLOCK DIAGRAM (4/6)
OVERALL BLOCK DIAGRAM (3/6)
OVERALL BLOCK DIAGRAM (2/6)
OVERALL BLOCK DIAGRAM (1/6)
POWER BLOCK DIAGRAM (3/3)
POWER BLOCK DIAGRAM (2/3)
POWER BLOCK DIAGRAM (1/3)
OVERALL BLOCK DIAGRAM (6/6)

HVR-M15J/M15U/M15N/M15E/M15P/M15C 3-1
3-1. OVERALL BLOCK DIAGRAM (1/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3. BLOCK DIAGRAMS
VIDEO IN/OUT
(8/17)
IC6401
VIDEO
A/D CONVERTER
(8/17)
IC6601
(5/17)
IC1872
(5/17)
IC1871
JU-002 BOARD VD-036 BOARD (1/6)
OVERALL (4/6)
(PAGE 3-4)
1
OVERALL (4/6)
(PAGE 3-4)
2
OVERALL (2/6)
(PAGE 3-2)
4
OVERALL (6/6)
(PAGE 3-6)
3
OVERALL (4/6)
(PAGE 3-4)
5
J1000
44
5
38 - 36
66, 64, 63
49 - 42
9, 10
59 - 52
NTSC/XPAL_DET
7
3
56
S_C_IN
S_Y_IN
CH1_IN
CH2_IN
AD18
34
68 T1
U1
65
ACLK
AL_JK_CK13MFO
HDI_HD, HDI_VD, HDI_OE
HDI_VD
HDI_Y0 - HDI_Y7
HDI_C0 - HDI_C7
AE22, AC20,
AC22
AE20, W19,
Y19, AD22,
AC19, AE21,
AA22, AD23
Y17, AC17,
AD19, W18,
Y18, AD20,
AB18, AC18
VD_SO, XVD_SCK
VD_SI, VD_SO, XVD_SCK
VD_SI, VD_SO, XVD_SCK
A: VIDEO SIGNAL
A: AUDIO SIGNAL
BASE BAND
SIGNAL
PROCESSOR,
DOWN
CONVERTER
(5/17)
IC1801
(1/3)
05
C
Y
C
Y
CN6401CN1001
CN3601CN1002
8
1
7
5
8
1
S_C_OUT
APC_ERROR
4FSC_OUT
AGC_CONT
ACC_CONT
XCS_IC_6401 XCS_IC_6401
XCS_IC_6601
XRST_VTR
S_Y_OUT
6
3
6
3
V_OUT
12
S_C_OUT
S_Y_OUT
V_OUT 12
CH1_OUT
1 1
CH2_OUT
CH1_IN
CH2_IN
CH1_OUT
CH2_OUT
3 3
V_IN
S_C_IN
S_Y_IN
V_IN 10 10
7
5
1
7
2
6
S VIDEO IN
VIDEO IN
AUDIO CH-1
CH-2
IN
S VIDEO OUT
VIDEO OUT
AUDIO CH-1/3
CH-2/4
OUT
48
39
ELECTORONIC
VOLUME
(9/17)
IC3601
CH1/2 LINE
OUT AMP
(9/17)
IC3600
6
11
41
39
14
18
22
42
34
36
6
AUDIO CH1/2
A/D, D/A
CONVERTER
(9/17)
IC3602
5
14 P22
M19
3
26
27
2
16
J20
F24
DC LEVEL
DETECT
Q6401
STANDBY
CONTROL
Q3602
BUFFER/
CLAMP
Q6603
SDC_IN
XPWAD
XPWDA
28
30
X6401
13.5MHz
26 25
14
31
15
47
17
1
11
29, 30
16, 17
VSP_SO, XVSP_SCK
XCS_IC_3601
VSP_SO, XVSP_SCK
XCS_IC_3601
31
33
24
DEM0, DEM1
AUIN11
13
C24
IC_1801_ADAO1
23
CK256FSO
CK64FSO
15
12
CKFSO
AU_MUTE
HDMI_AUSEL
11
SD_OUT_C
SD_OUT_Y
IC_1801_EVBL
IC_1801_EVGR
VCK
BUFFER
Q2004, Q2005
GAIN
CONTROL
Q3615 - Q3618
Q3603 - Q3605
LINE MUTE
DRIVE
Q3600, Q3601
LINE MUTE
CONTROL
21, 41, 76
12
X1871
55.631868MHz
X1872
55.6875MHz
42
(9/17)
IC3603
42
E25
G22
H23
CN2002
CN1000
PR_OUT
PB_OUT
Y_OUT
XPSV_D4
1
3
5
IC2001
COMPONENT
OUT AMP
(6/17)
33
31
35
1
3
5
4
6
2
18
BUFFER
Q2007 - Q2009 IC_1801_LNOY
IC_1801_LNOPB
IC_1801_LNOPR
COMPONENT
OUT
Y
Pb/Cb
Pr/Cr
J1001

HVR-M15J/M15U/M15N/M15E/M15P/M15C 3-2
HDV PB, HDV-i.LINK
HDV REC, HDV-i.LINK
DV/DVCAM REC
HDV REC/PB, HDV-i.LINK
HDV PB
HDV REC, DV/DVCAM REC
HDV-i.LINK
VD-036 BOARD (2/6)
BASE BAND
SIGNAL
PROCESSOR
(5/17)
IC1801
(2/3)
HDV STREAM
PROCESSOR,
MUX/DEMUX
(2/17)
IC2801
HDV-MPEG VIDEO
ENCODER/DECODER,
MPEG AUDIO
SIGNAL PROCESSOR
(4/17)
IC2202
TRN_HD, TRN_VD, TRN_FLD
IC_2202_YO0 - IC_2202_YO7
IC_2202_CO0 - IC_2202_CO7
256M SDRAM
(4/17)
IC2501
OMCLK
OMCEX
BMDT16 - BMDT47
OMAD00 – OMAD12,
OMADB0, OMADB1
A: VIDEO SIGNAL
A: AUDIO SIGNAL
A: VIDEO/AUDIO SIGNAL
A: VIDEO/AUDIO/SERVO SIGNAL
D23
CKTRNO
B21
F24
B24
TRN_VF_SYNC
E18
EBS[0] - EBS[7]
KCLK
AD12 296
ERDY
AD16 316
ERE
AD17 321
BSEN
AA17
DJCLK
AD22
BS[0] - BS[7]
11 13 14 17 18 21
22 23
27
10
M20
D16
P20
XRST_IC_2202
INT_IC_2202
L1
J1
G2
OMCLKX
K1 G3
H7
A22
CKTRNI
CKFSO
CK64FSO
AD10
CK27MFO2 CK27MFO2_T
ADATAIN0, ADATAIN1
ADATAIN0, ADATAIN1
AUIN21, AUIN22
203
ALE_SIM
AD18
F8
D9
G9
7
3
5
1
IC_1801_SRCH
CK27MFO2_E
CK27MFO2_T
IC_1801_PCRERR
IC_1801_FLD27MF
IC_1801_SRCH
IC_1801_PCRERR
IC_1801_FLD27MF
XCS_IC_2202
XRST_IC_2202
INT_IC_2202
MCLK
XCS_IC_2202
XRST_IC_2801_0
XRST_IC_2801_1
40
240
232
XCS_IC_2801_2
230
348
A20
Y16
MCLK
P24
P21
M24
AUDAI, AUENI
AUDAO, AUENO
276, 277279, 281 297 - 304
235, 229, 228
W17, W16, N20
82
80
71
84, 85
76, 77
OVERALL (4/6)
(PAGE 3-4)
7
OVERALL (3/6)
(PAGE 3-3)
8
OVERALL (3/6)
(PAGE 3-3)
6
CKFSO
CK64FSO OVERALL (1/6)
(PAGE 3-1)
4
RECDT
73
CRECDT
74
CRECCK
CRECA1, CRECA2
RECA1, RECA2
RECCK
VITDT
72 VITCK
OVERALL (4/6)
(PAGE 3-4)
10
OVERALL (3/6)
(PAGE 3-3)
9
OVERALL (3/6)
(PAGE 3-3)
11
203
XCS_IC_2801
225
SCWIN_IC_2801
PCLK1
DIR1
XPEN1
XPACC1
FRRV, TRRT, TRRV, DRP
FRRV, TRRV, DRP
FRRV, TRRT, DRP
PD10 - PD17
213,
214,
217
-
219,
222
-
224
256, 257, 259, 260,
263 - 266
DXXA08_SIM, DXXA09_SIM
241, 243 - 246,
248, 249, 251,
204,
205, 207
185
200
201
199
187,
189
-
193
195,
197
05
D24A00_SIM - D31A07_SIM
D24A00_SIM - D31A07_SIM
B17, F17,
A19, G17,
C18, F18,
A20, C19
B19, D19, B20, D20,
C21, C20,
C22, G20
D23, E23,
E24, E21,
D20, D24,
C23, D21
Y13, AC13,
AA14, AC14, AA15, AC15,
AD15, AC16
AD21, AA21, AD20, AA18,
AA19, AC19,
AD19, AC20
T20, T21, T23, T24,
R20, R21,
R23, R24
D24A00_SIM - D31A07_SIM
AD16, AB14,
Y14, AD15,
W14, AB13,
AE13, AD14
D18, C24, B23, D17,
B21, B20,
A21, B18
A22, D21, B22
E14 - E16
L19, K24
W13, AD13
P23, M24
M23, M21N23, N21
AA16, Y17AC17, AC18
P25
CKFSO
M25
CK64FSO
T1, U1, T2, R4, R2,
R1, P5, N5, N2, M2,
P2, P1, N1, L5, M4
J8, J9, K7, K9, K1,
K3, J1, J2, J3, H1,
J7, H2, H3, H8, H9
AD6, AC4, AD5, AC5, AD4,
AA5, AD3, AB2, Y8, W2, Y9,
U2, AA2, W1, V2, V1, G1, H1,
F1, H2, E2, D2, F2, G2, D7,
A4, B5, A5, B7, B6, D8, A6,
R8, P7, P8, N7, N8, M7, M8,
L7, L3, M2, M3, N2, N3, P2,
P3, R2, A8, B7, B8, C7, C8,
D7, D8, E7, E3, D2, D3, C2,
C3, B2, B3, A2
N24
ALE_SIM
Y15
ALE_SIM
AC14
SD_OSD_VD
AE15
VREF
AB16
IC_1801_OEREF
AC15
XCS_IC_1801_SIM
SD_OSD_VD
VREF
IC_1801_OEREF
XCS_IC_1801_SIM
DXXA00_SIM - DXXA10_SIM
D24A00_SIM - D31A07_SIM
DXXA00_SIM - DXXA10_SIM
(5/17)
IC1876
24
CK27MFO2_E
(5/17)
IC1874
24
3-2. OVERALL BLOCK DIAGRAM (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

HVR-M15J/M15U/M15N/M15E/M15P/M15C 3-3
HDV PB, DV/DVCAM PB
DV/DVCAM REC
DV/DVCAM-i.LINK
HDV-i.LINK
HDV-i.LINK, DV/DVCAM-i.LINK
HDV PB
DV/DVCAM PB
DV/DVCAM REC
X3201
24.576MHz
05
VD-036 BOARD (3/6)
CK64FSO
CKFSO
CKFSO
XCS_0
OVERALL (4/6)
(PAGE 3-4)
12
OVERALL (2/6)
(PAGE 3-2)
11
OVERALL (2/6)
(PAGE 3-2)
8
CK13MFO1
CK13MFO1
A: VIDEO SIGNAL
A: AUDIO SIGNAL
A: VIDEO/AUDIO SIGNAL
A: VIDEO/AUDIO/SERVO SIGNAL
CK64FSO
CK27MFO2_R
CK27MFO2_T
CKFSO
IC4003
(1/2)
HI CONTROL
(12/17)
XCS_SDRAM
74
69
124
16
8
XMS_IN
71
IC4201
16M SDRAM
(13/17)
38
18
DSCK_VM
MS_LED_ON
BASE BAND
SIGNAL
PROCESSOR
(5/17)
XCS_IC_1801_VMXCS_IC_1801_VM
OVERALL (2/6)
(PAGE 3-2)
9
IC1801
(3/3)
RYO0 - RYO3
RYI0 - RYI3
HYO, HCO
ADATAOUT0, ADATAOUT1
HYI, HCI
RCI0 - RCI3
RCO0 - RCO3
OVERALL (6/6)
(PAGE 3-6)
13
XSYS_RST
TRCKO
IC3001
DV SIGNAL
PROCESSOR
(1/17)
104
41
45
139 86
143
VLAT_IN_FYO1 77F9
U2
R1
D17
VLAT_SYNC_FCI 76A9
FLAT_SYNC_FYO0 18 39
93
B9
21
78
60
188
CS_IC_3001_BUS
158
XCS_IC_3001
IC_3201_PLL_ON
XCS_IC_3201
XIC_3201_INT
FR1
XRST_IC_3001
CS_IC_3001_BUS
57 ALE_SIM ALE_SIM
XCS_IC_3001
XRST_IC_3001
48, 47
30
54, 107, 152, 189, 55, 153,
190, 109
AA4, AC3, AD3,
AD2, AE2, AC1,
AB3, AC2, W4,
AA2, Y3, Y1,
T7, U6, T4, T6
AE8, Y10, Y9, AD8,
AC8, AC7, AB8, W9,
AE6, AD7, AB6, AE5,
W8, AC6, Y7, AE4,
AC6, AC5, AD4
13, 72,
14, 73
L4, K7,
L2, M7
M2, M3,
N2, M1
149, 186,
150, 187
58, 111,
112, 59
123, 166,
124, 125
164, 165 167, 126
ADATAIN0, ADATAIN1
ADATAIN0, ADATAIN1
168, 127
N3, P3
155, 192
VITDT
VITCK
12, 75
M20, L20
K2, L3
15
62
157, 114, 3
FRRV, TRRT, TRRV, DRP
95 - 98
IC3201
HDV/DV
i.LINK
INTERFACE
(3/17)
139 - 136
104
OVERALL (2/6)
(PAGE 3-2)
6
OVERALL (4/6)
(PAGE 3-4)
16
OVERALL (5/6)
(PAGE 3-5)
17
OVERALL (4/6)
(PAGE 3-4)
14
OVERALL (4/6)
(PAGE 3-4)
15
CRECDT
CRECA1, CRECA2
CRECCK
RFIN
LBUS0 - LBUS3
PCLK1 87
DIR1 91
XPEN1 76
XPACC1
FRRV, TRRT
75
5
50
43
88 OFR2
XRST_VTR
106
DIR
109
XENA 94
XACC 93
51
106
151
PD10 - PD17
TPA, NTPA, TPB, NTPB TPA, NTPA, TPB, NTPB
CN3201
CN4002
(1/2)
JL-002 BOARD
(1/2)
CN721
1 - 4
6, 7, 2, 1
CN722
6, 7, 2, 1
FRRV, TRRT, TRRV, DRP
SWP
XRST_VTR
SWP
D24A00_SIM - D31A07_SIM
D24A00_SIM - D31A07_SIM
D24A00_SIM - D31A07_SIM
DXXA00_SIM - DXXA11_SIMDXXA08_SIM, DXXA09_SIM
DXXA00_SIM - DXXA11_SIM
VSP_SI, VSP_SO, XVSP_SCK VSP_SI, VSP_SO, XVSP_SCK
MS_DIO, MS_BS, MS_SCLK
OSC
77 - 79,
81 - 85
105,10814, 151
A1_VM - A21_VMA1_VM - A19_VM
A1_VM - A11_VM,
A13_VM
149
150
HDV/DV
119, 162,
120, 163
P2, N1,
P6, R2
P1, P4,
T2, R4
70, 121,
71, 122
65 - 67
69 - 71,
73, 74
51 - 56,
58, 59,
61 - 64
18, 10, 12
80
287
81, 85, 78
D0_VM - D15_VM
D0_VM - D15_VMD0_VM - D15_VM
2, 3, 5, 6, 8, 9,
11, 12, 39, 40, 42,
43, 45, 46, 48, 49
19 - 24,
27 - 32
IC4202
32M FLASH
(13/17)
15
1913
A1_VM - A21_VM
D0_VM - D15_VM
33 - 36,
39 - 46,
49 - 52
2 - 11,
20 - 27,
30, 31, 55
DSCK_VM
122 K1
AD10
AE3
291 - 298, 301 - 304,
1 - 4, 7 - 11
16 - 18, 21 - 24,
27 - 35
(5/17)
IC1875
24
(5/17)
IC1873
24
1IC4403
64k EEPROM
(12/17)
XCS_EEP
236
EEP_RXD3,
EEP_TXD3,
EEP_SCK3
2, 5, 6
103 - 105
CPC
(For Check)
REC_PROOF
CHIME_SDA, CHIME_SCL
234
XCS_IC_5000
237
97 - 99
135, 136,
246, 247
HI_SI, HI_SO, XHI_SCK
3-3. OVERALL BLOCK DIAGRAM (3/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

HVR-M15J/M15U/M15N/M15E/M15P/M15C 3-4
A: VIDEO/AUDIO/SERVO SIGNAL
A: SERVO SIGNAL
HDV REC, DV/DVCAM REC
HDV PB, DV/DVCAM PB
05
VD-036 BOARD (4/6) RP-243 BOARD (1/2)
IC5402
(2/2)
IC1201
(1/2) DRUM
MOTOR
DRIVE
FG AMP
PG AMP
53
50
52
49
CN1005
DRUM FG
M901
DRUM MOTOR
DRUM_VS
FL MOTOR
DRIVE
43
45
LPF
2
CAPSTAN
MOTOR
DRIVE
CAPSTAN
MOTOR
FG AMP
4
U, V, W
FG
PG
DRUM_FG_SENS
DRUM_PG_SENS
DRUM_U,
DRUM_V,
DRUM_W
CAP_U,
CAP_V,
CAP_W
CM_UNLOAD,
CM_LOAD
DRUM_FG
DRUM_PG
CAP_VS
CAP_FWD, CAP_ON
DRUM_FG
DRUM_PWM
XCS_IC_5402
CAP_PWM
DRUM_PG
CM_LOAD, CM_UNLOAD
CAP_FG
1
M
DRUM PG
M903
CAPSTAN MOTOR
M
HALL
M905
FL MOTOR
M
CAPSTAN FG
(10/17)
IC5402
(1/2)
(10/17)
CAPSTAN
/DRUM
PWM DRIVER
(17/17)
J6
H7
H6
J5
F1
IC2601
16M FLASH
(11/17)
D1
C1
X5000
20MHz
XCS_FLASH H2
B4 XRST_FLASH Y16
SERIAL
INTERFACE
38, 36
64, 67
63, 65, 68
74, 76, 78
75, 771, 80
10 - 15
7, 8
37
34
XRST_VTR
OVERALL (3/6)
(PAGE 3-3)
12
OVERALL (6/6)
(PAGE 3-6)
18
SYS_V
D14
HDI_VD
B6
SDC_IN
U23
CM_LIM_DET
41
44
35
CK13MFO1CK13MFO1 OVERALL (2/6)
(PAGE 3-2)
7
XRST_VTR
HI_SI, HI_SO, XHI_SCK
VIDEO HEAD
CN2000
RF_MON
ODD
XODD,
YODD
XEVEN,
YEVEN
CN4002 (2/2)
EVEN
SWP
IC2000
REC/PB
AMP
15
13 30
44
35
46
38
CPC
(For Check)
CONT1, SW_PS, ALL_PS
OVERALL (3/6)
(PAGE 3-3)
14
RECDT
RECA1, RECA2
RECCK
RFIN
31
Y14
AC15
B9
A9
D19, B20
D11
AB9
L22
XRST_VTR
A18, B5, A5
Y7, AB7,
AB6 B12, L2
AC10, L23
32, 33
40, 42
10, 93, 4
39, 37, 45
69, 72
6 - 11
CN1002
CN5403
U, V, W
HU±, HV±, HW±
FG1, FG2
5, 6, 9 - 12
13 - 18
1, 2
2, 3 6, 52, 3
FRRV
17
U4, U2, V1,
T4, T2, U1,
R4, R2, P2, P1, N4, N2,
N1, M4, M2
G6, E1, D1, C1,
A1, B1, D2, C2,
A2, B5, A5, C5,
D5, B6, A6
E2 - E5,
H2 - H5
C6, D6, E6,
B2, C3, D4
AB5, Y5, AB4,
AB3, AC3, AB2
B21
D9
D22
OVERALL (1/6)
(PAGE 3-1)
1
OVERALL (3/6)
(PAGE 3-3)
16
AC6
XCS_IC_5000
A13
XCS_IC_6601
AB18
XCS_IC_6401
N23
XPSV_D4
OVERALL (1/6)
(PAGE 3-1)
5
AC5
HDMI_AUSEL
M23
AU_MUTE
OVERALL (1/6)
(PAGE 3-1)
2
DEM0, DEM1
VD_SI, VD_SO, XVD_SCK
AC8, AB8,
AC7
Y13, AC12,
Y12
B18, A16,
D15, A21
VSP_SO, XVSP_SCK
FR1
J2
XCS_IC_3201
H4
XCS_IC_2801
J1
XCS_IC_2202
D18
SCWIN_IC_2801
G1
XCS_IC_2801_2
D13
XRST_IC_2801_0
E22
XRST_IC_2202
A6
INT_IC_2202
K1
MCLK
B8
SD_OSD_VD
B7
VREF
Y8
IC_1801_OEREF
G4
XCS_IC_1801_SIM
B13
XRST_IC_2801_1
M1
CS_IC_3001_BUS
B2
XCS_IC_3001
G2
XRST_IC_3001
K4
ALE_SIM
ALE_SIM
F23
IC_3201_PLL_ON
Y18
XRST_VTR
OFR2
OVERALL (3/6)
(PAGE 3-3)
15
OVERALL (2/6)
(PAGE 3-2)
10
FRRV, TRRT, TRRV, DRP
FRRV, TRRT, TRRV, DRP
SWP
VSP_SI, VSP_SO, XVSP_SCK
VSP_SO, XVSP_SCK
AA2, Y2,
W4, W2,
Y1, V4,
V2, W1
FLASH_A15 - FLASH_A20
F2 XSYS_RST
B4 NTSC/XPAL_DET
F4
AC17
XCS_IC_3601
AB17
XPWAD
Y17
XPWDA
E20
XIC_3201_INT
Q1210, Q1219
Q1209, Q1220
G8, H10G10, G9
DRUM PWM
CAPSTAN PWM
DXXA00_SIM - DXXA10_SIM
D24A00_SIM - D31A07_SIM
DXXA00_SIM - DXXA11_SIM
D24A00_SIM - D31A07_SIM
DXXA00_SIM - DXXA14_SIM
D24A00_SIM - D31A07_SIM
R MECHANISM DECK
(MDX-R201)
(1/2)
CN1001 (1/2)CN5402 (1/2)
RF_MON
CONT1,
SW_PS, ALL_PS
3
8 - 10
3
RF_IN 44
3535
3636
SWP 77
8 - 10
RECDT 1414 RECCK 1313
RECA1, RECA2
11, 12
11,12
32, 30 - 26 32, 30 - 26
UHE±,
VHE±,
WHE±
CAP_FG1,
CAP_FG2
49, 47, 45,
43, 41, 39
50, 48, 46,
44, 42, 40
55, 56
49, 47, 45,
43, 41, 39
50, 48, 46,
44, 42, 40
55, 56
IC5000
(1/2)
MECHA
CONTROL
(11/17)
1IC5001
32k EEPROM
(11/17)
XCS_EEP_S
F1
EEP_SI,
EEP_SO,
EEP_VSP_SCK
2, 5, 6
AB14, AC14,
AB13
3-4. OVERALL BLOCK DIAGRAM (4/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.