Sorelle Berkley User manual

Made in QHY, China
Important Information:
Berkley crib and changer
Assembly Instruction
Read all instructions BEFORE assembling crib.
KEEP INSTRUTIONS FOR FUTURE USE.
Website:www.sorellefurniture.com

Page 2
WARNING:
*Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
*Failure to follow these warnings and the assembly instructions could result in serious injury or death.
DO NOT use this crib if you cannot exactly follow the accompanying instructions.
*To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
*Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string
around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or
attach strings to toys.
*Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of
the body or clothing on loose fasteners.
*Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or
drapes may strangle a child.
*Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and
remove bumper pads, large toys and other objects that could serve as steps for climbing out. This crib
has an adjustable mattress support. For the convenience of the parent when the baby is very small, the
mattress support may be used in the highest position.
*Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35in. (89cm),
whichever occurs first. The child should be placed in a youth or regular bed.
*Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts,
or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and
other fasteners.Do not use crib if any parts are missing,damaged or broken.Contact C&T International
/ Sorelle for replacement parts and instructional literature if needed. Do not substitute parts.
*Follow warnings on all products in a crib.
*If refinishing, use a non-toxic finish specified for children's products.
*Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
*Infants can suffocate in gaps between crib sides and a mattress that is too small.
*Ensure a safe environment for the child by checking regularly, before placing the child in the crib, that
every component is properly and securely in place.
*To avoid head injury, do not allow any child to play underneath the crib.
*Never add an accessory such as a bassinet or changing table that extends over the sleeping area.
C
Crib Warnings:
AUTION : ANYMATTRESSUSEDINTHISCRIBSHALL
BEAT LEAST 271/4”(69CM)x 515/8” (131 CM) WITH
ATHICKNESSNOT EXCEEDING 6”(15CM).
SORELLE

Page 3
Toddler Bed Warnings:
Changing Table Warnings:
WARNING
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
The maximum user weight is 50lbs (22.7kg)
WARNING
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords,
around a child's neck. These items may catch on bed parts.
CAUTION
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress
at least 51 5/8 in (1310mm) in length, 27 1/4 in (690mm) in width and 4 in (100mm) in
thickness. The mattress thickness must not exceed 6 in (150mm).
WARNING
FALL HAZARD - to prevent death or serious injury, always keep child within arm’s reach.
Read all instructions before use of the changing table.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE USE.
Inspect the changing table periodically. Do not use the changing table if it is damaged or
broken. Contact C&T International Inc. with any questions.
Tighten all loose screws and bolts before each use.
The maximum recommended weight of the child is 30lbs for the changing table.
Use only the pad provided by C&T International / Sorelle or Manufacturer’s
Always secure the pad to the changing surface by inserting the strap through the hole in
the middle of the pad. See Instructions.
NEVER use crib without Changing Table attached
SORELLE

Page 4
AU
BEA
A THI
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on
the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape
specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly
recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON CARE AND MAINTENANCE:
-Do not scratch or chip the finish.
- Inspect the product periodically, contact C&T International / Sorelle for replacement parts or questions.
-Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
NOTES ON USE:
Keep children and others safe by following these simple rules:
-Do not allow any child to play on furniture
-Do not allow climbing on any piece of furniture.
-Do not allow hanging from any piece of furniture.
- Always monitor your child’s activity when in the nursery.
SORELLE
To clean, use only mild household soap and warm water. DO NOT use bleach or detergent. DO
NOT use abrasive cleaners which can scratch the finish. Use clean soft cloths to wash, rinse and
dry. With proper care, the quality finish will last a long time. Wood surfaces may be treated with
a light application of a good grade of non-toxic furniture polish. Read contents on back of polish
to make sure polish will not harm unit.
Store all parts from Crib, which are not used for Full Size Headboard, in original carton(s) (if
available) to prevent damage and allow reuse.
Cleaning and Storage

Page 5
(A) Left End (x1) (A1) Middle Panel (x1) (A2) Right End (x1) (C) Footboard (x1)
(B) Headboard (x1)
(D1) Middle - Front Post (x1) (D2) Left - Back Post (x1) (E) Middle - Rear Post (x1)
(F) Rear - Top (x1) (G) Middle Bar (x3) (J) Front - Up Bar (x1)
(H) Middle-Up Bar (x1)
(L) Front- Bottom Bar (x1)(K) Front- Middle Bar (x1) ( M ) Middle-Bottom Support Bar (x1) ( N ) Changer Top Shelf
with Support Bar (x1)
(O) Back Shelf (x1)
( S ) Changing Pad (x1) ( T ) Middle Shelf Panel (x1)
( Q ) Changer Middle MDF Panel (x1)( P ) Back-Bottom Shelf (x1)
(D) Left -Front Post (x1)
SORELLE
(R4) Drawer Bottom (x2)(R3) Drawer Back (x2)
(R1) Drawer Left (x2) (R2) Drawer Right (x2)
( R ) Drawer Front (x2)
Assembly Parts

Page 6
Hardware list
SORELLE
( m ) Knob (x2)
Assembly Parts
(i) 8 x 30 mm Wood Dowels (3 pcs)
(j) 6 x 30 mm Wood Dowels (14 pcs)
(n) Allen Key (1 pc)
(o) Mattress Base (1 pc)
(p)
(k) Metal Shelf
Support (4 pcs)
(l) Screwdriver (1 pc)
(c) M6 x 50mm Allen bolt (12 pcs) ( g ) M4 x 26mm Allen bolt (2 pcs)
(h) 25mm Wood Screw (16 pcs)
(a) M6 x 85mm Allen bolt (4 pcs)
(b) M6 x 60mm Allen bolt (16 pcs)
(e) M6 x 35mm Allen bolt (3 pcs)
(f) M6 x 17mm Allen bolt (4 pcs)
(d) M6 x 45mm Allen bolt (6 pcs)
Barrel Nut (4 pcs)

Page 7
SORELLE
Crib Assembly
Attach headboard (B) to Left-back Post (D2) and Middle-back Post (E)
by using 4 Bolts( a )& 4 barrel nut( p ) and 2 wood dowels( i )as Figure 2.
Attach Left End (A) to left front and back posts (D&D2) by using 6 Bolts ( c ) as Figure 1.
Attach Middle End (A1) to Middle front and back postd (D1&E) by using 6 Bolts ( c ) &1 bolts( e ) and 1
wood dowels( i ) as Figure 1.
1
2
Fig.1
Fig.2
A1
A
D
D1
E
B
D2
D2
E
c
c
a
a
a
p
i
i
p
p
p
c
c
c
c
c
c
c
c
i
e
(e) M6 x 35mm Allen bolt X1
(i) 8 x 30 mm Wood Dowels X1
(i) 8 x 30 mm Wood Dowels X2
(p) Barrel Nut X 4
(c) M6 x 50mm Allen bolt X12
n
(a) M6 x 85mm Allen bolt X 4

Page 8
SORELLE
Attach the Rear Top (F) and 2 Middle Bar ( G) to Middle - Rear Post ( E ) using 4 Bolts( b ) and 2 Wood
Dowels( j ). Attach Middle - up Bar (H) to the Middle Panel using 1 Wood Dowel( j ) as seen below in
Figure 4.
Attach the Front-Up Bar ( J ) ,Front- Bottom Bar (L), Front Middle Bar(K), and Middle Bar (G) to the Front Middle Post (D1)
using 4 Bolts( b ) and 3 Wood Dowels( j ). Attach Middle - Bottom Bar(M) to the Middle Panel (A1) using 1 Bolt ( e ) and
1 wood dowel ( j ) as seen below in Figure 3.
3
4
Fig.3
Fig.4
D1
E
G
G
F
H
A1
A1
J
L
G
K
M
B
(e) M6 x 35mm Allen bolt X 1
(j) 6 x 30 mm Wood Dowels X 4
n
b
j
j
j
j
j
j
b
e
(b) M6 x 60mm Allen bolt X 4
(j) 6 x 30 mm Wood Dowels X 3
(b) M6 x 60mm Allen bolt X 4
b
b
b

Page 9
Attach the Right End ( A2) to the end of the crib using 8 Bolts ( b ), 1 Bolt ( e ), and 7 Wood Dowels ( j )
as seen below in Figure 6.
Insert Changer Top Shelf with Support Bar (N) & Changer Middle MDF Panel (Q) & Back - Bottom Shelf (P)
& Middle shelf panel ( T ) to Grooves as seen below in Figure 5.
5
6
SORELLE
Fig.5
Fig.6
N
T
Q
P
L
j
jj
j
j
j
e
b
b
b
b
b
b
A2
N
F
J
(e) M6 x 35mm Allen bolt X 1
(j) 6 x 30 mm Wood Dowels X 7
(b) M6 x 60mm Allen bolt X 8

Page 10
Attach FootBoard (C) to Left-Front Post(D)
& Middle-Front Post (D1) by using 6
Bolts( d ) as Figure 8.
8
7
SORELLE
Attach Mattress Base ( o ) to crib by using 4 Bolts( f ) as Figure 7.
NOTE: For infants, set mattress support
assembly in an upper position for greater
accessibility. As child grows and can stand,
mattress support assembly must be lowered.
See Warning Statements.
Fig.7
Fig.8
f
(f ) M6 x 17mm Allen bolt (4 pcs)
C
D
D1
o
o
(4x)
n
d
d
d
d
d
d
(d) M6 x 45mm Allen bolt (6 pcs)

( m ) Knob x 2
3
4
3. Secure both sides of
Drawer Front (R) to drawer
assembly with four (4)
Screws (h). Figure 3.
Check all screws for
tightness.
4. Using Drawer Knob
Screw ( g ), install one (1)
Knob ( m ) on Drawer.
Figure 4.
Repeat for all drawers.
Set drawers aside for
later use.
( m )
(R)
(h)
(h)
(h)
(h)
( g )
Page 11
SORELLE
1
Grooves
1.Working on a padded
flat surface, attach Drawer
Sides (R1&R2) to Drawer
Back (R3) with Philips Head
Screw. Figure 1
2. Slide Drawer
Bottom (R4) into drawer
assembly. Figure 2.
(R2)
(R3)
2(R4)
(R1)
(h)
(h)
(h)
(h)
Drawer Assembly
(l) Screwdriver x 1
(h) 25mm Wood Screw x 16 ( g ) M4 x 26mm Allen bolt x 2

Page 12
Insert 4 Metal Shelf Support ( k ) into holes. Then put Back Shelf (O) on 4 Metal Shelf Support ( k )
as Figure 10
10
9
SORELLE
Insert two (2) drawers into changer.
k
Fig.10
Fig.11
(4x)
O

Page 13
11
SORELLE
Add changing pad to top of organizer.
Changing Pad Assembly
3. Make sure that safety belt is fastened around
child, and adjusted so safety belt is snug around
child’s mid-section. Make sure buckle is securely
latched. Figure 3.
CLICK!
1
2
3
2. Pull through front of pad completely. Make
sure pad is facing up and warnings are always
visible. Figure 2.
Important : If changing pad and safety belt are
assembled, make sure warnings are facing up and visible.
If not, reassemble by following the steps below.
1. Locate safety belt bolted to dresser top. Insert
safety belt through slit in changing pad from
back of pad. Figure 1.
Important : Tighten all bolts before use your Crib.
Fig.12

Page 14
Disassembling Crib For Storage
To disassemble crib for storage, follow assembly steps in reverse.
Store all parts and hardware together in a safe place. Store the instruction manual in the supplied
envelope attached to the mattress support assembly for future reference for re-assembly.
SORELLE
Converting to a Toddler Bed (Optional)
Follow all instructions supplied with the 148# Toddler Rail System. NOTE:148# Toddler Rail System
is not included. Please see your crib retailer, visit WWW.Sorellefurniture.com or contact C&T
International / Sorelle for more information.
Additional Parts and Hardwares
( 148# Toddler Rail System Not included, sold separately)
(A) 148 Toddler Rail (1 pcs)
M6* 50mmBolt （4pcs）
a
IMPORTANT: MATTRESS SUPPORT MUST BE IN THE LOWEST POSITION
TODDLER BED ASSEMBLY

Page 15
SORELLE
.
Follow all instructions supplied with the 224# Adult Rail System. NOTE: 224# Adult Rail System
is not included. Please see your crib retailer, visit WWW.Sorellefurniture.com or contact C&T
International / Sorelle for more information.
Fullsize Bed and Changer Table Conversion (Optional)