Sound Appeal SA-VF6.5S User manual

TheTechnical Support Center at Sound Appeal is Available Between the Hours of
8:30 AM - 5:30 PM EST, Monday through Friday, Excluding Holidays.
Warranty & Repair
S UND
APPL
S UND
APPL
SA-VF6.5S Owner’s Manual
SPECIFICATIONS
Power Handling:
Nominal Impedance :
Sensitivity :
Woofer:
Tweeter:
Crossover:
Weight (pair):
Model number:
80 wRMS
8 Ohms
90dB 1 Watt 1 Meter
Injection PP Cone with
Butyl Rubber Surround
1 " Silk Dome Design
12dB/ Octave
13.2 lbs
SA-VF6.5S
Premium Bookshelf Speakers
www.Sound Appeal.com
All Sound Appeal speaker products have (2) year Limited Warranty against defects
in materials and workmanship. Proof of purchase must accompany all claims.
During the warranty period Sound Appeal will replace any defective part and
correct any defect in workmanship without charge for either parts or labor. Sound
Appeal may replace returned speakers with a product of equal value and perfor-
mance. In such cases, some modifications to the mounting may be necessary and
are not Sound Appeal's responsibility. For this warranty to apply, the unit must be
installed and used according to its written instructions. If necessary, repairs must
be performed by Sound Appeal. The unit must be returned to Sound Appeal at the
owner’s expense and with prior written permission. Accidental damage and
shipping damage are not considered defects, nor is damaged resulting from abuse
or from servicing performed by an agency or person not specifically authorized in
writing by Sound Appeal. Sound Appeal sells products only through authorized
dealers and distributors to ensure that customers obtain proper support and
service. Any Sound Appeal product purchased from an unauthorized dealer or
other source, including retailers, mail over dealers and online sellers will not be
honored or serviced under existing Sound Appeal warranty policy. Any sale of
product by an unauthorized source or other manner not authorized by Sound
Appeal shall void the warranty on the applicable product. Damage to or destruc-
tion of components due to application of excessive power voids the warranty on
those parts. In these cases, repairs will be made on the basis of the retail value of
the parts and labor. To return for repairs, you must contact customer service at:
www.SoundAppeal.com for a Returned Merchandise Authorization (RMA) number
# then the unit must be shipped to Sound Appeal at the owner’s expense, along
with a note explaining the nature of service required. Be sure to pack the speak-
er(s) in a corrugated container with at least 3 inches of resilient material to protect
the unit from damage in transit . This Warranty Does Not Cover: Damage caused
by abuse, accident, misuse, negligence, or improper operation (installation). As
well as any products that have been altered or modified or a product whose
identifying number of decal, serial #, etc. has been altered, defaced or removed
and normal wear and maintenance.

IMPORTANT NOTICE:
The serial number of the
speakers is located on the rear
of the product. Please write
this serial number on the
warranty page of the manual
and keep it in a secure place
for future reference. Make sure
to register your product on our
Facebook page:
PRECAUTIONS
Do not attempt to open the cabinet or remove speaker parts. There are no user
serviceable parts inside. Keep recorded tapes, watches, and personal credit
cards using magnetic coding away from the speakers. Periodically wipe the
cabinet with a soft cloth. Do not use any type of scouring powder, abrasive pad
or solvent.
WIRING
Before connecting, turn off the amplifier or receiver to avoid damaging the
speaker system. When connecting the speakers to the amplifier, it is very
important to observe the correct polarity of the speaker wire. This means that
the wire attached to the positive (+), or red terminals on one component must
be attached to the positive (+), or red terminal on the corresponding component
speaker output terminals. Similarly, the negative (-), black, or ground terminals
must connect to the respective negative (-), black, or ground terminals. This is
easy to do by locating the color stripes or unique markings that appears on
MOUNTING
You can use the attached mounting hook to
wall mount the speakers. Determine height of
the speaker for best listening experience. For
best results the loudspeaker should be
positioned at or above ear level. Using dry wall
anchor (not included) attach screw with ¼”
head (not included) to the anchor. Or directly
attach screw to the stud in the wall. Leaving
approximately ¼” of the screw exposed to catch
the hook. Not recommended to go into drywall
without hitting a stud or using an anchor. A
Right Left
Amplifier
SA-VF6.5S
CONNECTING TO YOUR SYSTEM
This speaker system is driven best by an amplifier or receiver rated as per the
wattage indicated in the specification section. It is recommended to use an
amplifier or receiver with sufficient power rating. Avoid driving the speaker system
continuously with a wattage exceeding the maximum input power of each speak-
er. Using an amplifier with too much power could cause damage to the speaker
drivers.
SPEAKER PLACEMENT
If your application requires the speaker to be mounted, please follow these
directions. Using the appropriate screws (not included) to mount the bracket.
Correct Placement is important for maximizing the sound quality of your premium
bookshelf speakers. Take time to experiment with positioning according to the
available placements. The loudspeakers should be separated from each other the
approximate distance to the listening area. Close proximity to a side or rear wall
will enhance the bass performance. When placing the speaker in the corner try to
position so that the distance to the side wall is not equal to the rear wall.
pivoting/tilting speaker mount could
also work for this speaker. Attach the
bracket to the wall with the appropri-
ate screws. Mount the speaker to the
bracket with the 4 holes on back of
the speaker. Point the speaker
toward the listening area. Once the
direction of the speaker has been
determined tighten the screws
securely.
most wire. We recommend a minimum
of 18 gauge for runs up to 25 feet, and
thicker for longer runs. Strip off 1/2” of
insulation from the ends of the cable,
twist the bare strands and insert into
the binding post. Take care that no
stray stands of wire short across
between the terminals.
www.facebook.com/www.soundappeal