Sound Freaq Sound Rise User manual

Hi,
let’s get
started.
Sound Rise
Wireless Speaker & Alarm Clock

Welcome to your new Sound Rise!
We created Sound Rise for music lovers like you.
Start the day with your favorite tunes, rock out
while getting ready to go and relax with music as
you fall asleep. Here are some helpful tips to get
you started.
Enjoy.

4
Radio
Everyday
Line In
Weekend
Bluetooth
Weekday
Music source Indicates music source when speaker is on as
Bluetooth, Aux Line In or FM Radio
Alarm
frequency Indicates if alarm is set for weekdays, weekends
or everyday. Alarm can also be set for a specific
day of the week as well
Alarm Displayed when alarm is set to go off
Snooze Displayed when alarm is snoozed
Backup battery Displayed when backup battery is low
Tone control Indicated tone selection, when neither is
displayed, tone is set to “flat” mode
Chime Indicates when alarm wake up sound is the
internal chime

5
Getting to know Sound Rise
Volume
Sleep
Timer
Alarm &
Time Set
Snooze
Play Control
Bluetooth
Pair
Music
Source
Alarm

6
USB Charging
Port
Backup battery compartment
(bottom of Sound Rise)
Auxiliary
Line In
Tone
Control
DC
Power
FM
Antenna
Screen
Dimmer

7
Getting to know Sound Rise
USB Charging Port
DC Power
Auxiliary Line In
FM Antennae
Screen Dimmer
Tone Control
Connect to charge a phone, tablet or other device with 5V / 1A of
power. Use the USB charging cable provided with your device.
Port to plug in the DC power adapter included with your Sound Rise.
Connect any device with a standard headphone jack using a Line in
cable (not included) to listen to audio.
Connect the external FM antenna (included) for improved reception.
Press to select the preferred screen brightness. When screen
brightness is off, tap any button to momentarily display the time.
Press to select your preferred sound equalization tone for audio
playback: flat (default), warm or bright.

8
1
3
2

9
Setting the Time
1
2
3
4
Press and hold SET button for 2 seconds until the hour
starts blinking.
Press the +/–buttons to adjust the hour.
Press SET button to conrm the hour.
Repeat steps 2 and 3 to complete setting the time.
The time setting options are:
- Hour
- Minute
- AM/PM
- 12 or 24 hour time display
- Day of the week

10
1
3
2
1

11
Setting the Alarm
1
2
3
4
Press and hold Alarm 1 or Alarm 2 button for 2 seconds
until the hour starts blinking.
Press the +/–buttons to adjust the hour.
Press Set button to conrm the hour.
Repeat steps 2 and 3 to complete setting the alarm. The alarm
setting options are:
- Hour
- Minute
- AM/PM
- Day of the week (everyday, weekends, weekdays
or a specic day of the week.)
- Wake up sound (Bluetooth, FM radio, Line in or
built-in chime)
- Wake up sound maximum volume
Note: To wake up to music from your phone or other device,
you must rst pair Sound Rise.
Note: When waking up to Bluetooth, Sound Rise will “play” the
current song on your connected device. If your device is not
available when the alarm goes o, Sound Rise will wake you
with its built-in chime.

12
Time of Day
Day of the Week
2
1
1

13
Using the Alarm
1
2
3
4
Press Alarm 1 or Alarm 2 button and the alarm settings
will be displayed and the alarm will be turned on. When
the alarm is on, the Alarm 1 or Alarm 2 icon will be
displayed.
To turn the alarm o, press and hold the Alarm 1 or
Alarm 2 until the icon is not shown (the display will briey
display “OFF”).
When the alarm goes o, press Alarm 1 or Alarm 2 to
turn the alarm o for the day.
If you prefer to get some more sleep after the alarm goes o,
press SNOOZE and the alarm will go o and will be shown
on the display. The default snooze time is 10 minutes. Press the
snooze button repeatedly to set the snooze time to 20 > 5 > 10
minutes. While alarm is being snoozed, tap the SNOOZE to see
the remaining snooze time.

14
3
4
2
1

15
Using the Speaker
Press SNOOZE button or to turn the speaker on.
Press to select the audio source:
- Bluetooth
- FM Radio
- Line In
Press +/ -to set the volume.
Press SNOOZE button or hold the for 2 seconds to turn the
audio o.
Press the TONE button on the back of Sound Rise to select
your preferred sound equalization tone for audio playback: at
(default), warm or bright.
1
2
3
4
5

16
Sound Rise
3
4 5
1
2

17
Bluetooth Pairing
1
2
3
4
5
Press the Music or SNOOZE button to turn on the system.
Press the Music button repeatedly until appears on the
display to select Bluetooth mode.
Press PAIR on Sound Rise to start pairing mode. The Bluetooth
icon on Sound Rise’s display will ash rapidly.
On your phone, tablet or computer, open your Bluetooth
settings menu to detect available devices. Once Sound Rise is
detected, select it from the list of available devices to connect.
On iPod, iPhone and iPad devices tap to select “Sound Rise”
from the list of devices in Bluetooth settings.
To pair another device, simply repeat the pairing process with
steps 1 and 2 from Pairing Section. To re-connect a device that
has already been paired, press and hold PAIR button on Sound
Rise and select “Sound Rise” from your Bluetooth settings
menu on your phone, tablet or computer. On most devices, no
password is needed to pair, however, if a password is requested
the default password is “1234”.

18
1
3
4
2

19
Listening via Bluetooth
Press the Music or SNOOZE button to turn on the system.
Press the Music button repeatedly until appears on the
display to select Bluetooth mode.
You can change the volume by either using the volume buttons
on Sound Rise or changing the volume on your paired device.
For max volume, turn both volumes to maximum.
Use the Play Control buttons on Sound Rise to remotely control
your connected devices and to play, pause and skip tracks.
1
2
3
4

20
3
2
1
4
(antenna on back)