LENCO SB-210 BT User manual

SB-210 BT
BLUETOOTH®SOUNDBAR WITH USB
& SD CARDREADER
User manual
Please read and follow these instructions before using your unit.
www.lenco.com
20121303 v1.0

GB-2
Table of content
What’s in the box? ............................................................................................ 3
Exploring the device.......................................................................................... 4
Getting started .................................................................................................. 5
Where to install ............................................................................................ 5
First use of the remote control...................................................................... 6
Replacing the battery of the remote control .................................................. 6
POWER SUPPLY ............................................................................................. 6
SLEEP TIMER SETTING.................................................................................. 6
HOW TO SET TIME.......................................................................................... 6
TIMER SETTING.............................................................................................. 7
USB & SD/MMC CARD PLAYBACK................................................................. 7
BLUETOOTH® OPERATING ........................................................................... 7
RE-CONNECT TO THE BLUETOOTH® AUDIO SOURCE DEVICE................. 8
EQ EFFECTS ................................................................................................... 8
FM RADIO........................................................................................................ 8
TUNING THE FM RADIO............................................................................. 8
STORING YOUR FAVORITE RADIO STATION........................................... 9
MUTE THE UNIT .............................................................................................. 9
VOLUME LEVEL/TREBLE/BASS ADJUSTMENT............................................. 9
PROFESSIONAL AUDIO MODES.................................................................... 9
CONNECTING WITH OTHER DEVICES .......................................................... 9
AUDIO IN..................................................................................................... 9
LINE IN ...................................................................................................... 10
Maintenance of the device .............................................................................. 10
Troubleshooting.............................................................................................. 11
Specifications ................................................................................................. 11
Safety instructions .......................................................................................... 12
Declaration of Conformity................................................................................ 13
Do not distribute copyrighted material ............................................................. 14
Disclaimer....................................................................................................... 14
Service and support ........................................................................................ 15
End of life ....................................................................................................... 15
Trademarks .................................................................................................... 16

GB-3
Dear customer,
Thank you for choosing for Lenco. At Lenco, we are convinced that everyone
should enjoy life as much as possible. Our products are meant to support,
improve and create joyful moments for everyone. For this reason, we offer user-
friendly, high-quality and well-designed consumer electronics for an excellent
price. This user manual is designed to help you with the features of this device.
Note:
This user manual was written during the development of the product, based on
the factory settings. If the product would need improvement, priority is given to
the product and therefore, in these cases, the quick start guide, user manual,
illustrations in the user manual and/or packaging may differ from the actual
product.
Lenco is not liable for any printing errors in this user manual.
What’s in the box?
The content of the box is assembled with the utmost care. In the unfortunate
case that anything is missing, please contact your dealer.
Content of the box:
1 Soundbar
1 Remote control
1 User Manual
1 RCA Cable
1 Audio Cable
2 Wall mount brackets

GB-4
Exploring the device
1
2
3
4
5
6 7 8 9 10
11 12 13 11
14 15
1. Volume - button
2. Volume + button
3. Standby button
4. Source button
5. PAIR/PLAY/PAUSE Button
6. SD/MMC Card slot
7. USB Port
8. LCD Display
9. Bluetooth® indicator
10. Remote control sensor
11. Hanging holes
12. FM antenna
13. AC Cord
14. AUX in Jack
15. Line in Jack

GB-5
1. Sleep button
2. Source button
3. Clock button
4. Timer button
5. Numeric buttons
6. Voice button
7. EQ button
8. Bass+/- buttons
9. Treble +/- buttons
10. Mute button
11. Standby button
12. TUNING/SKIP/SEARCH
BACKWARD Button
13. TUNING/SKIP/SEARCH
FORWARD Button
14. MEM Button
15. PAIR/PLAY/PAUSE Button
16. MUSIC Button
17. MOVIE Button
18. VOL +/- Buttons
19. CH+/- Buttons
Getting started
Where to install
Never place the device in direct sunlight. Place it on a sturdy platform of which
the surface should be flat and steady, so the product can’t fall or hit by any
objects. Make sure the product is placed in such a manner that nothing can fall
on top of it, as pressure will damage or break the product. Prevent insertion of
objects into the ventilation slots, or openings in the cabinet at all time.
Always read the safety instructions carefully before use.
Lenco is not responsible for damages and/or consequential damage
caused by improper use or malfunction of the device.
Lenco is not responsible for the loss of data during data transfer or or
the loss of data.
Do not use a USB extension cable to connect a USB device. The use of
a USB extension cable can cause malfunction or loss of data.
Lenco recommends using A-brand batteries.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

GB-6
First use of the remote control
Before the first use of the remote control, the plastic tab should be pulled out of
the remote.
Lenco recommends using A-brand batteries.
Bright ambient light may interfere with operation
of the remote control.
Remove the batteries from the remote control
when it is not being used for a long time.
Replacing the battery of the remote control
When the remote control stops working or stops
working properly, the battery should be replaced.
Replace the battery as follows:
1. Press the catch at arrow 1 in the direction of
arrow 2 and hold it.
2. Pull the battery tray out by pulling it in the
direction of arrow 2.
3. Replace the battery with a new one and slide the
battery tray back in the remote control. Note that
the + side of the battery is facing up. The model
number of the battery is CR2025.
POWER SUPPLY
Plug AC plug into the outlet socket for connecting the main power.
NOTE: If not any audio signal inputs to the unit in about 60 minutes, the unit will
enter to standby mode automatically (except at FM mode).
SLEEP TIMER SETTING
You can set the sleep timer at power on modes as following instructions:
During playback, press the SLEEP button on the remote control repeatedly to
cycle through the sleep time options, Release the SLEEP button when your
desired sleep time shows on the screen. Once the sleep time is expired, the unit
will be switched off.
During playback, press SLEEP button once to check the remaining sleep time.
HOW TO SET TIME
At the standby mode, press and hold the CLOCK button on the remote until
Hour flashes on the screen; use the TUNING/SKIP/SEARCH buttons on the
remote to adjust the hour and confirm your adjustment by pressing the CLOCK
button on the remote; Minute starts blinking on the screen, press the

GB-7
TUNING/SKIP/SEARCH buttons on the remote to set the minute accordingly,
press the CLOCK button on the remote again to confirm your setting.
During playback, press and hold the CLOCK button on the remote to check the
current time.
Note: The time only could be set at standby mode.
TIMER SETTING
1. At standby mode, press and hold the TIMER button on the remote. The hour
on the display will begin blinking on the screen with the flashing timer icon “T”.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the hour.
3. Press the TIMER button to confirm. The minute on the display will begin
blinking.
4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the
minute.
5. Press the TIMER button on the remote to confirm your setting.
6. After the set time is reached, the unit will power on to the radio automatically.
7. The timer function can be deactivated or activated by short pressing the
TIMER button on the remote.
USB & SD/MMC CARD PLAYBACK
1. Power on the unit, insert an USB or a SD/MMC card into the unit.
2. Press SOURCE button repeatedly to switch to USB or card mode. The
playback will start automatically.
3. Press the TUNING SKIP/SEARCH FORWARD button on the remote to skip
to the next track; press and hold to search through the track forward.
4. Press the TUNING SKIP/SEARCH BACKWARD button on the remote to skip
to the previous track; press and hold to search through the track backward.
5. Use the numeric buttons to enter the track number to select your desired
track for playback.
BLUETOOTH® OPERATING
This unit can receive stereo audio signal from a BLUETOOTH® stereo audio
source device.
1. Power on the unit, switch to BLUETOOTH® mode by pressing SOURCE
button repeatedly.
2. LED indicator rapid blinking while it is pairing.
3. Enable the Bluetooth® of the Bluetooth® audio source device.
4. Pair and connect to SB-210 BT (the unit) on the audio source device. If
prompted for passcode, enter “0000”.
5. Pairing successful (LED indicator blue), ready to stream music.
6. During playback, press PLAY/PAUSE button to cease or resume the
playback.

GB-8
7. During playback, press TUNING/SKIP/SEARCH FORWARD button to skip to
the next track; press TUNING/SKIP/SEARCH BACKWARD button twice to
skip to the previous track.
8. During playback, press and hold TUNING/SKIP/SEARCH buttons to search
through the current track forward or backward.
Note:
Pairing mode is canceled about 1.5 minutes.
The above are generic steps to pair a BLUETOOTH® device, for more
specific instructions on BLUETOOTH® connectivity for your device, please
consult your manufacturer’s manual.
Once the unit enters to the BLUETOOTH® mode, it will connect to the last
paired external BLUETOOTH® device automatically.
RE-CONNECT TO THE BLUETOOTH® AUDIO SOURCE DEVICE
If the device is already paired with the SB-210 BT, but became unconnected
even with both Bluetooth® devices turned on. You can re-connect them by
following steps:
1. Press and hold the PAIR button on the unit or on the remote to re-link the
audio source device. The Bluetooth® indicator will blink for about 1.5 minutes
for connecting.
2. Select SB-210 BT on the audio source device for connecting. Bluetooth®
indicator will turn to solid blue if the SB-210 BT and the device have been re-
connected successfully.
EQ EFFECTS
During playback, press EQ button on the remote repeatedly to cycle through the
EQ options; when your desired EQ effect shows on the screen, release the
button.
FM RADIO
TUNING THE FM RADIO
1. Power on the unit, switch to FM (RADIO) mode by pressing SOURCE button
repeatedly.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio
station. Press and hold the TUNING/SKIP/SEARCH buttons on the remote to
auto search radio station forward or backward respectively (When an
available station will be found, the unit will broadcast it immediately and the
searching will be stopped). During auto searching, press the
TUNING/SKIP/SEARCH buttons on the remote to stop the searching.
3. At radio mode, it is possible to access the frequency via numeric buttons on
the remote control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz.

GB-9
STORING YOUR FAVORITE RADIO STATION
1. During playback, press the MEM button on the remote for storing the current
station until a memory cell number flashes on the screen.
2. Use the CH+ or CH- buttons on the remote to select the corresponding
memory cell for storing the station.
3. Confirm your selection by pressing the MEM button on the remote.
4. During radio playback, press the CH+ or CH- buttons on the remote
repeatedly to recall the stored stations.
MUTE THE UNIT
During playback, press the MUTE button on the remote to switch off the audio.
Press the button again to resume the audio.
VOLUME LEVEL/TREBLE/BASS ADJUSTMENT
Press the VOLUME +/- buttons or TREBLE +/- buttons or BASS +/- buttons on
the remote to adjust the volume output level or treble effect or bass effect.
PROFESSIONAL AUDIO MODES
During playback, press the VOICE, MUSIC or MOVIE buttons on the remote to
switch among voice, music and movie audio modes for getting high sound
quality. The audio modes can reveal the characters and details of the sound of
the voice, music and movie and make you liked being there.
CONNECTING WITH OTHER DEVICES
AUDIO IN
1. Connect the Aux in jacks on the unit to audio source, for example, DVD
player with an RCA cable.
2. Power on the unit and the audio device.
3. Press the SOURCE button repeatedly to switch to AUX mode.
4. Use the native controls on the connected audio device to begin playing music
through the connected unit.

GB-10
LINE IN
Follow steps to connect the unit to another audio device:
1. Connect the device into the unit’s LINE IN jack with the LINE OUT cable.
2. Press STANDBY button to turn the unit on.
3. Press SOURCE button repeatedly to switch the unit to Line mode.
4. Power on the device and begin play.
Maintenance of the device
Clean the device only with a soft damp cloth.
Do not use detergents