SoundLogic M0716B User manual

1
LED Candle Speaker
M0716B
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
& RETAIN FOR FUTURE USE

2
Getting Started
Remove the product from the box.
Remove any packaging from the product.
Please retain all packaging until you have checked and counted all the parts and the
contents against the parts list.
Package Contents
Flameless LED Candle with Wireless Speaker
USB charging cable
Instruction manual
Features
1. Flameless LED Candle
2. Made from Real Wax
3. Flickering Flame-Effect
4. Built-in Bluetooth Speaker
5. Stream wireless music from up to 10 metres away
6. Built-in Rechargeable Battery
7. Compliments any home décor
8. Simple and easy to use
IMPORTANT SAFETY INFORMATION
1. Read all instructions before using this product.
2. Do not leave this product unattended while connected to the power supply.
3. Do not use if product has been dropped or damaged in any way.
4. Repairs to electrical equipment should only be performed by qualified personnel.
Improper repairs may place user at serious risk.
5. Place product on sound, even surface, free of vibrations and away from sources of
heat.
6. Do not put objects into openings.
7. Keep free of dust, lint, hair etc.
8. Do not use this product for anything other than its intended use.
9. Keep this product out of reach of children.
10. This product is not a toy.

3
Description of Parts:
S. No.
Description
S. No.
Description
1
ON/OFF Switch (bottom)
4
LED Light
2
Charging Port
5
Charging LED Indicator
3
Real Wax
INSTRUCTIONS FOR USE
LED Candle Speaker
For best results, fully charge the product before its first use.
1. Connect the USB charging cable (included) to the charging port of the Flameless
LED Candle and insert the other end into a port on your computer or similar
power source.
2. Red Charging LED Indicator turns on indicating that the battery is being charged.
It takes around 3 hours to fully charge the device. When the battery is fully
charged, LED Indicator will turn to Green.
Turn On/Off the LED Candle Speaker
Slide the ON/OFF switch to turn on/off the candle. Bluetooth speaker turns on/off
automatically, when the candle is turned on/off.
Turn the speaker to Bluetooth pairing mode -
1. Slide the ON/OFF switch to turn on the speaker. This also turns the LED Candle on.
2. You will hear the indication tone, indicating that your speaker is entering the

4
“pairing” mode.
(Note: Speaker automatically pairs with the previously paired devices)
Pairing your smart phone, tablet etc with the Bluetooth Speaker –
Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device
such asn your smart phone, tablet etc within the distance of 26-33 Feet. Simply follow
the below steps.
1. Slide the ON/OFF switch to turn on the speaker. This also turns the LED Candle
on.
2. You will hear the indication tone, indicating that your speaker is entering the
“pairing” mode.
3. Turn on the Bluetooth on your smart Phone or Tablet or Computer.
4. It will search for nearby Bluetooth devices.
5. You’ll find this product in the list of scanned devices as “CANDLE SPEAKER”. Tap
on “CANDLE SPEAKER” from the list, in order to pair it with your smart phone etc.
6. If required, enter the password ‘0000’ to confirm the pairing.
7. Once paired successfully, you would hear another indication tone.
8. If you fail to pair it within the time frame or you want to pair it with a new source
please follows the steps outlined above.
Select your favorite song at the source device (your smart phone, tablet etc) and music
would now stream through Bluetooth speaker. All functions, like play/pause/skip
forward/skip backward/volume control etc, can be only controlled from the source
device.
Do’s and Don’ts
Do not play music at excessive levels. Damage to hearing and/or equipment may result.
Specification
Bluetooth version : 4.2
Speaker : 3 Watts
Product Size : Dia. 3”xL6” max.
Product Weight : 8.7 oz
Play time : up to 2 hours
Charge Voltage : DC5V (USB)
Charging time : Up to 3 Hours
Bluetooth Range : 26-33 Feet
Built-In Rechargeable
Battery : 3.7V / 500mAh
(Note: Battery life & charging time may vary based on individual usage, handling & types of
devices connected)

5
Troubleshooting
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone,
Laptop, etc.) volume too low.
Battery dead
Adjust volume at source.
Charge the Battery.
Sound distorted
Battery nearly dead
Charge the Battery.
No sound at all.
Source (Tablet, Mobile Phone,
Laptop.) turned off.
Speaker turned off.
Volume turned down source.
Media paused on source.
Turn the source on.
Turn the speaker on.
Adjust volume at source.
Play media from source.
Care and Maintenance
Clean the product with a soft, damp cloth. Never use chemicals or hard abrasives.
Keep this product away from wet or damp surroundings.
FCC Instructions
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
product generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures :
-Reorient or relocate the receiving antenna.
-Increase the separation between the product and receiver.
-Connect the product into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device

6
must accept any interference received, including interference that may cause undesired
operation.