Southern Enterprises Eclectic MS999200TX User manual

Page 1
MS999200TX
“Eclectic” TV/Media Stand
Assembly Instructions
PO#

1 Quantity
Of 1
left middle panel
2 Quantity
Of 1
right middle panel
3 Quantity
Of 1
big fixed shelf
4 Quantity
Of 2
small middle panel
5 Quantity
Of 1
small fixed shelf
6 Quantity
Of 1
left side panel
7 Quantity
Of 1
right side panel
8 Quantity
Of 1
bottom panel
9 Quantity
Of 1
door
10 Quantity
Of 1
top panel
11 Quantity
Of 1
upper back panel
12 Quantity
Of 1
lower back panel
13 Quantity
Of 1
middle adjustable shelf
14 Quantity
Of 1
side adjustable shelf
15 Quantity
Of 1
drawer front panel
16 Quantity
Of 3
drawer right side panel
17 Quantity
Of 3
drawer left side panel
18 Quantity
Of 1
drawer back panel
19 Quantity
Of 1
drawer bottom panel
20 Quantity
Of 1
drawer front panel
21 Quantity
Of 2
drawer back panel
22 Quantity
Of 2
drawer bottom panel
23 Quantity
Of 1
drawer front panel
24 Quantity
Of 1
drawer front panel
Page 2
“ Eclectic ” TV/Media Stand
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage.

25 Quantity
Of 2
drawer front panel
26 Quantity
Of 2
drawer left side panel
27 Quantity
Of 2
drawer right side panel
28 Quantity
Of 2
drawer back panel
29 Quantity
Of 2
drawer bottom panel
A Quantity
Of 32
wood dowel
B Quantity
Of 8
cam bolt
C Quantity
Of 8
cam lock
D Quantity
Of 16
bolt Dia: 1/4” x 1-1/4”
E Quantity
Of 16
bolt ø1/4” x 1/2”
F Quantity
Of 16
metal washer
G Quantity
Of 1
allen wrench
H Quantity
Of 26
Dia: 1/8” x 0.5”
screw for back
I Quantity
Of 1
magnet
Quantity
Of 2
Dia: 1/8” x 5/8”
screw for magnet
K Quantity
Of 8
shelf holder
L Quantity
Of 40
Dia: 3/16” x 1-1/4”
bolt for drawer
M Quantity
Of 40
nut
N Quantity
Of 8
short bolt
O Quantity
Of 1
knob
P Quantity
Of 2
knob
Page 3
“ Eclectic ” TV/Media Stand
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage.

Q Quantity
Of 1
knob
R Quantity
Of 2
handle
S Quantity
Of 4
steel wheels
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Page 4
“ Eclectic ” TV/Media Stand
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage.

Page 5
Figure 1
Insert 4 pcs cam locks (C) into holes on fixed
shelf (3). Screw 4pcs cam bolts (B) into holes on
left middle panel (1) and right middle panel (2).
Attach left middle panel (1) and right middle
panel (2) to fixed shelf panel (3) by inserting
wood dowels (A) and cam bolts (B) into
corresponding holes until all panels meet.
Note: Make sure the holes for the wood dowels
on fixed shelf (3) are facing up as shown on the
illustration.
Tighten by rotating cam locks (C) clockwise with
Phillips screwdriver.
Figure 2
Insert 4 pcs cam locks (C) into holes on small
fixed shelf (5). Screw 4pcs cam bolts (B) into
holes on right middle panel (2) and right side
panel (7). Attach assembled unit and right side
panel (7) to small fixed shelf panel (5) by
Inserting wood dowels (A) and cam bolts (B) into
corresponding holes until all panels meet.
Tighten by rotating cam locks (C) clockwise with
Phillips screwdriver.
Attach small middle panels (4) to assembled unit
as shown in figure 2 by inserting wood dowels
into corresponding holes on fixed shelf (3).
“ Eclectic ” TV/Media Stand
Assembly Instructions
(1)
(2)
(3)
A
A
A
A
B
B
B
B
C
C
C
C
B
(5)
B
(1)
(2)
(3)
C
A
A
A
B
A
(4)
C
C
C
(4)
(7)
A
A
A
B
B
(5)

Page 6
Figure 3
Attach bottom panel (8) to assembled unit and
left side panel (6) by inserting wood dowels into
corresponding holes until bottom panel (8),
assembled unit 2, and left side panel (6) meet.
Use 8 pcs bolts (D) to connect bottom panel (8)
to left side panel (6) and assembled unit.
Tighten bolts (D) with Phillips screwdriver.
Figure 4
Use bolts (E) through metal washer (F) to
connect steel wheels (S) to bottom panel (8).
Tighten bolts (E) with allen wrench (G).
T
A
(2) (1)
A
(4) (4)
(7)
A
(6)
A
A
A
A
A
A
A
(8)
D
D
D
D
D
D
D
D
E
(S)
(8)
E
G
F
F
S
S
“ Eclectic ” TV/Media Stand
Assembly Instructions

Page 7
Figure 5
Attach door (9) to left side panel (6).
Use bolt (N) to connect knob (O) to door (9).
Tighten bolt (N) with Phillips screwdriver.
Figure 6
Attach top panel (10) to assembled unit by
inserting wood dowels (A) into corresponding
holes until assembled unit and top panel (10)
meet.
Use bolts (D) to connect assembled unit to top
panel (10).
Tighten bolts (D) with Phillips screwdriver.
A
O (9)
(1)
(2)
(N)
(6)
(7)
“ Eclectic ” TV/Media Stand
Assembly Instructions
A
(1)
(10)
D
(6)
A
(7)
D
D
D
D
D
D
D
A
A
A
A
A
A
(2)

Page 8
Figure 7
Insert upper back panel (11) and lower back
panel (12) into grooves on the back of
assembled unit.
Tighten screws (H) with Phillips screwdriver (not
included).
Figure 8
Attach magnet (I) to corresponding holes of top
panel (10) with screws (J).
Insert shelf holder (K) into desired holes of the
middle panels (1), (2) and left side panel (6).
Then, place middle adjustable shelf (13) and side
adjustable shelf (14) onto the shelf holders (K).
“ Eclectic ” TV/Media Stand
Assembly Instructions
K
(10)
(14)
(1)
I
(6)
(2)
(13)
K
K
K
J
H
(8)
(10)
(7)
(6)
(11)
(12)
H
(1)
(2)
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H

Page 9
Figure 9
Insert nuts (M) into holes on drawer front panel
(15). Attach drawer side panels (16) and (17) to
drawer front panel (15) with bolts (L).
Tighten bolts (L) with Phillips screwdriver.
Insert the drawer bottom (19) into inner grooves
of drawer side panels (16), (17) and drawer face
panel (15).
Insert nuts (M) into holes on drawer back panel
(18), then, attach drawer back panel (18) to ends
of drawer side panels (16) and (17).
Tighten bolts (L) with Phillips screwdriver.
Attach knob (Q) to drawer face panel (15) with
bolt (N).
Figure 10
Insert nuts (M) into holes on drawer front panel
(20). Attach drawer side panels (16) and (17) to
drawer front panel (20) with bolts for drawer (L).
Tighten bolts for drawer (L) with Phillips
screwdriver.
Insert the drawer bottom (22) into inner grooves
of drawer side panels (16), (17) and drawer front
panel (20).
Insert nuts (M) into holes on drawer back panel
(21). Then, attach drawer back panel (21) to
ends of drawer side panels (16) and (17).
Tighten bolts (L) with Phillips screwdriver.
Attach knob (P) to drawer front panel (20) with
bolt (N).
O
Q
(18)
(15)
L
(16)
(17)
(19)
L
L
L
L
L
L
L
M
M
M M
M
M
M M
N
(21)
L
L
M
M
M M
P
(20)
L
(16)
(17)
(22) L
L
L
L
L
N M M
M
“ Eclectic ” TV/Media Stand
Assembly Instructions

Page 10
Figure 11
Insert nuts (M) into holes on drawer front panel
(23). Attach drawer side panels (16) and (17) to
drawer front panel (23) with bolts for drawer (L).
Tighten bolts for drawer (L) with Phillips
screwdriver.
Insert the drawer bottom (22) into inner grooves
of drawer side panels (16), (17) and drawer front
panel (23).
Insert nuts (M) into holes on drawer back panel
(21). Then, attach drawer back panel (21) to
ends of drawer side panels (16) and (17).
Tighten bolts (L) with Phillips screwdriver.
Attach knob (P) to drawer front panel (23) with
bolt (N).
Figure 12
Insert nuts (M) into holes on drawer front panel
(24). Attach drawer side panels (26) and (27) to
drawer front panel (24) with bolts for drawer (L).
Tighten bolts for drawer (L) with Phillips
screwdriver.
Insert the drawer bottom (29) into inner grooves
of drawer side panels (26), (27) and drawer front
panel (24).
Insert nuts (M) into holes on drawer back panel
(28). Then, attach drawer back panel (28) to
ends of drawer side panels (26) and (27).
Tighten bolts (L) with Phillips screwdriver.
Attach knob (R) to drawer front panel (24) with
bolts (N).
N
“ Eclectic ” TV/Media Stand
Assembly Instructions
(21)
L
L
M
M
M M
P
(23)
L
(16)
(17)
(22) L
L
L
L
L
N M M
M
(28)
L
L
M
M
M M
R
(24)
L
(26)
(27)
(29) L
L
L
L
L
N
M
M
M