Space Pole SPK200 User manual

MK15-0342 version 1.0 3/2022
Installation Guide
SPK200, SPK20X, SPK5XX
Center module for the SpacePole Kiosk

SPK200
SPK5XX
x 1
x8 M4 ange nuts
x4 M5x6
SPK20X
A B
x1 M3x6
x1
x4 M5x6
x4 M4x8 countersunk
x1
x1
x1
x1
x1
Assemble the parts Install screen
A2
x4 M5x6
x4 M4x8
a
a
b
b
Place the top module on the center
module
Secure it with the screws supplied
A1

Install to counter
A4
Two opons for cable management
1
2
Install backplates
x6 M4x8 countersunk
A5
For large screens:
Remove cutout from the boom of the top
module for alternave cable managent
A3 Run cables
Fixings not included: It is the
responsibility of the installers to
ensure the correct xings are used
for the

Assemble the parts
Printer Cover Installaon
B3
Install scanner and
cover
Note that the scanner must be mounted on
to the bracket prior to
installing the bracket and cover to the front
of the Center module
B1 B2
Install screen using
supplied xing
B4
x4 M4x8
aPlace the top module on the center
module
bSecure it with the screws supplied
x2 M3x6
x4 M4 ange nuts
x4 M4 ange nuts
a
b
x4 M5x6 a
b
c

Run cables and install
backplate
B7 B8
Install to counter
B6
Printer installaon
x2 M4x8 countersunk
Center the printer on the plate
Two opons for cable management
1
2
For large screens:
Remove cutout from the boom of the top
module for alternave cable managent
B5 Run cables
Fixings not included: It is the
responsibility of the installers
to ensure the correct xings are
used for the

Close and lock the door
B9
Close and lock the door
B10
a
a
b
b
Push in the lock with the key
Lock the door with the key