SPARTAN sport JYFM38 User manual

1
FOLDABLE MINI TRAMPOLINE
Manual
JYFM38”---DIA 96CM
JYFM40”---DIA 101.6CM
JYFM48”---DIA121.92CM
JYFM55”---139.7CM

2
Please read these instructions carefully. The instructions are an
integral part of the product. Therefore, please store them and the
packaging carefully in case questions arise in the future. Please
always include these instructions when you are handing on the
product to a third-party. Children should only assemble, use or
repair the product when they are under adult supervision.
Part list
ITEM NAME
PART NAME
JYFM38”
JYFM40”
JYFM48”
JYFM55”
Frame tube
4 pcs
4 pcs
4 pcs
4 pcs
Jumping mat
1 pc
1 pc
1 pc
1 pc
Safety pad
1 pc
1 pc
1 pc
1 pc
Leg tube
6 pcs
6 pcs
8 pcs
8 pcs
Tube cover
6 pcs
6 pcs
8 pcs
8 pcs
Safety cover
6 pcs
6 pcs
8 pcs
8 pcs
spring
32 pcs
36 pcs
44 pcs
48 pcs
screw
4 pcs
4 pcs
4 pcs
4 pcs
Screw cap
4 pcs
4 pcs
4 pcs
4 pcs
Washer
8 pcs
8 pcs
8 pcs
8 pcs
Installation instructions and information:

3
1、Keep children away from the folding trampoline during the installation process.
2、Do not touch the ends of the frame components with your fingers while unfolding
the folding trampoline. The folding trampoline will lock into the unfolded position. If
fingers are caught between the ends of the frame components, pinching may
cause serious injuries.
3、If you let go prior to the frame comonents having locked into place the frame
components will go back into the folded up position while you are unfolding the
folding trampoline.
4、The folding trampoline should always be unfolded or folded by two or more strong
individuals.
Prior to installtion, cross check all springs. These have been pre-installed by the factory. If
one of the springs is not attached or appears to the damaged, please perform the
following steps to secure the spring or exchange it:
A. Hook the open end of the spring into the hole on the panel. See figureA.
B. Turn the spring in the direction of the trampoline. See Figure B.
C. Slide the metal bow on the mat over the spring hooks as shown in figure C.
Step 1.
Place the trampoline on the ground and open the frame components. The trampoline should look
exactly as shown in figure 1
Step 2.
Hold the frame components while pressing down the frame components to unfold the trampoline
in a flat position.

4
Warning: do not allow your fingers to touch the end of the panels in the hinge-joint areas while
you are folding or unfolding the trampoline. If your gingers get caught between the ends of the
panels, pinching can cause serious injuries !
Step 3:
Push the safety padding over the panel frame, make sure the holes in the safety padding are
perfectly alinged with the screw connections of legs . See figure 3.
Note: place the opening over the screw connector and repeat this step for the screw connection on
the opposite end of the trampoline.
Step 4:
Screw the six legs into the screw connectors on the panel frame. See figure 4.

5
The safety padding must be securely connected with the frame before the trampoline may be used.
The trampoline must be placed firmly on the ground as showing in figure 5.
Step 5:
Place the trampoline into its normal position suitable for its used. Make sure that the safety
padding covers the springs of the folding trampoline. Stand on the trampoline to make sure that all
six legs are placed straight on the ground. See figure 5.
Safety warnings:
Paralysis or death can result if you land on your head or neck!
Do not perform somersaults (flips) as this will increase your chances of landing on your head or
neck!
The trampoline must be used only on level, firm ground. If you are exercising in interior rooms,
make sure that you have ample space around you. So that you will not bump into furnishings
while exercising. In particular, make sure that you have sufficient clearance to the ceiling or lamps.
We are recommend a slide distance of at least 1.5m and a safety clearance to the ceiling of 0.5m
(head clearance to ceiling while jumping). Insufficient clearance may result in dangerous head
injuries.
The trampoline may be used anywhere as long as it is set up on level ground and enough head
clearance is provided. Make sure that no objects with sharp or pointed edges are located in the
vicinity of the trampoline.
Sufficient light is critical while exercising to allow you to see the center of the trampoline without
any problems. Never jump on the sides of the cover.
Prior to any use of the folding trampoline, check the correct attachment of the safety padding.
The support legs of your trampoline have beenn fitted with anti-slip rubber feet. As is the case
with any rubber material, the feet may leave color spots on the ground in some cases. To prevent
spots, place a protective cocer over sufaces prone to discoloration and make sure that your
trampoline is standing securely. The trampoline must always be used on level and firm ground.
Make sure your trampoline is in perfect technical condition. Do not used the device if you
discover any deficiencies. Make sure defective parts are repaired immediately. Do not perform
technical modifications to the trampoline.

6
The trampoline is not a toy!
The trampoline must be used by one person at a time! Please note that it is approved for a
maximum load of 100kg!
For optimum results, exercise without shoes and barefoot. Do not wear socks, given that these
may cause you to slip on the trampoline. If you perfer wearing shoes while working out, make
sure they have soft rubber soles and no heels. Make sure that your shoes do not have any sharp
edges or tips as those can damage the trampoline.
Maiintenance, care and storage:
Check the product for damage or traces of wear and tear before and after each use. Store the
product in a safe place where it is protected from the elements, cannot be damaged, and can not
injure anyone.
For your own safety, please use original spare parts only. These can be sourced from us. Do not
make any structural changes.
If parts become damaged or if sharp edges or corners should develop, the product may be not used
any more. If in any doubt, please contact our service team.
Store the trampoline in a dark eara and protect it from dust and sharp objects. Clean the cloth
material with a brush. All other parts may be cleaned with a damp cloth. Use the protective covers
to protect windings from corrosion whenever the legs are not installed.
Disposal advice:
At the end of the product’s life, please dispose of it at an appropriate collection point provided in
your area. Local waste management companies will be able to answer your questions on this.
Service:
We make every effort to deliver faultless products. If faults do arise however, we put just as much
effort to rectifying them.