ASSEMBLE PREPARE OPERATE
Check the battery capacity. Always check the oil by running
the saw before working.
Push safety switch (9) forward,
and press the on/off switch (13)
to turn the product on.
Attach the front handle,
tighten the knob.
Assemble the shoulder strap.
Lift the clamping lever and extend
upper part of handle to
handle length into the tank.
Charging
Push the oil bottle cap and
unscrew it, and add proper
lubrication oil.
Attach the battery pack to machine.
Make sure it is firmly attached.
1 2
3
4 5
6 7
89
Chain oil
10
Loosen
Tighten
It is very important to adjust the
chain tension if the chain is
loose.
More detail, please check
manual.
Check that if the chain is loose
in every 10mins. How to adjust
the chain tension, see more
detail in instruction in manual.
13
9
