SPECIAL T ZIA Hospitality User manual

1www.specialt.net888.705.0777
ZIA Hospitality
Round, Square, or Soft Square Top Table
ASSEMBLY INSTRUCTIONS
TOOLS
PARTS & HARDWARE LIST
FOR MISSING PARTS OR QUESTIONS, PLEASE CALL CUSTOMER SERVICE AT .
Impact Drill #3 Phillips Bit #3 Phillips Screwdriver 5mm Hex Key
A
Tabletop
(1)
C
Steel Column
with mounting pins
(1)
F
M6 Phillips
Flat Head Bolts
(4)
H
Wood
Screws
(8)
ASSEMBLY STEPS
D
Aluminum
Feet
(4)
E
ZIA
Glides
(4)
G
M8 Phillips Flat
Head Bolts
(1)
1. Lay the tabletop (A) upside down
on a piece of cardboard or a carpeted
surface.
2. Install (4) M6 flat head bolts
(F) through steel column (C) into
mounting plate (B).
F
C
B
3. Install (1) M8 flat head bolt (G)
through mounting plate (B) into steel
column (C).
GB
C
B
Mounting
Plate
(1)
4. Attach mounting plate (B) onto
the bottom of the table top (A)
using (8) Phillips wood screws (H).
5. Ensure that all mounting pins are
secure on the column. If necessary,
use a 14mm wrench to tighten.
B
A
H
F
C

2www.specialt.net888.705.0777
ZIA Hospitality
Round, Square, or Soft Square Top Table
ASSEMBLY INSTRUCTIONS
6. Place (4) aluminum feet (D) onto pins.
7. Tighten (4) aluminum (D) feet onto pins using the
5mm Hex Key. (Mounting hardware comes
pre-installed in foot.)
ZIA HOSPITALITY | SOFT-SQUARE TOP
S -T ZIA HOSPITALITY TABLE ASSEMBLY I N ST R U C T I O N S | 0 8 2 0 2 3
8. Attach (4) glides (E) to (4) aluminum feet (D).
9. Ensure all feet are fully attached to the column and
carefully flip the table upright.
D
D
E