spherag ATLAS 2 User manual

Quickstart Guide
1. Turning on the ATLAS
2. Installation in the eld
1. Screw the antenna rmly. 1. Screw the device securely
onto a support, 1.5 meters /
60 inches above ground.
2. Position the device
towards the sun in direct
sunlight, for example facing
south at a 30° angle in Spain.
18° < α< 40°
2. Press the button on the side.
3. Check the blinking LED light.
Searching
(1 ash / 1 sec)
Connecting
(1 ash / 6 sec)
Connected
(2 ash / 6 sec)
h > 1.5 m

Quickstart Guide
Rev. 3 EN
3. Connection to the Platform
1. Access the
platform “portal.
spherag.com”
typing the URL or
scanning the QR.
2. Register or
log in with your
credentials,
using your email
address.
3. Input the
device’s IMEI,
found on the left
side of the device
and its box.
The ATLAS 2
Input
Flowmeter
Digital Signal
x4
Output
Valve
Pump
Sensor Input
Pressure
Climate
Level
Soil
x2
email
password
log in
log in
IMEI
IMEI
Your ATLAS is ready for irrigation!
create farm
create farm